李常平， 男，1986 年生，博士，讲师，硕士研究生导师 联系方式 电话：15073200235 E-mail:15073200235@163.com 研究方向 难加工材料切削、复合加工、超精密加工、切削刀具设计 教育经历 2011.08 韩国金乌工科大学 机械工程系 本科 2013.08 韩国岭南大学 机械工程系 硕士 2016.08 韩国岭南大学 机械工程系 博士 工作经历 2016.12-至今 湖南科技大学 机电工程学院 讲师 主持参与课题情况 [1] 国家自然科学基金青年项目，51905169，电火花辅助铣削钛合金的材料去除机制及其工艺优化，2020.01-2022.12, 26 万，在研，主持 [2] 国家自然科学基金面上项目，51975208，大型纤维复合材料风电叶片叶根端面螺栓孔钻削机理及缺陷主动控制，2020.01-2023.12， 60 万，在研，参与 [3] 国家自然科学基金青年项目，51805164，CFRP 新型钻-铣复合螺旋制孔专用刀具设计及其制孔缺陷抑制研究，2019.01-2021.12， 25 万，在研，参与 [4] 湖南教育厅科研项目, 19B190, 面向切削刃口最优设计的 50%Si/Al 高硅铝合金高速铣削刀具结构优化设计基础研究, 2019.10-2022.09，6 万，在研，参与 [5] 湖南教育厅科研项目, 18C0323, 钛合金超声辅助电火花-铣削复合加工表面形成机理, 2018.09-2020.12, 1 万，在研，主持 [6]国家自然科学基金面上项目，51775184，碳纤维增强复合材料钻削缺陷的形成机理与力热调控关键技术，2018/01-2021/12，60 万，在研，参与 [7] 校级科研项目，E51781，钛合金超声辅助电火花-铣削复合加工表面形成机理，5 万，已结题，主持 [8] 韩国科学技术部重大项目， 2011-0013496 ， Development of next generation muti-functional machining system for eco/bio components ， 2011/06 -2016/06， 3 亿韩币（约 176 万元），已结题，参与 [9] 韩国知识经济部重大项目，10033375，Development of Base and Core Technologies for Nano-based Ultra-Precision Hybrid Machining System ， 2009/06-2015/06，3.6 亿韩元（约 211 万元），已结题，参与 近几年科研成果情况 ● 发表学术论文 1. Chen Rong, Li Shujian, Tae Jo Ko，Li Pengnan, Jiang Yong, Li Changping, Failure analysis of R-regions of CFRP hat-shaped structure under pull-off load, Journal of Mechanical Science and Technology 34 (3) 2020. 2. Zhen Yu, Changping Li, Xinyi Qiu, Ki Moon Park, Tae Jo Ko*. Study on damage in carbon fiber reinforced plastic drilling using step cutting mechanism drill [J]. Journal of Alloys and Compounds, 826, 154058, 2020. 3. Zhen Yu, Changping Li*, Rendi Kumiawan, Ki Moon Park, Tae Jo Ko. Drill bit with a helical groove edge for clean drilling of carbon fiber reinforced plastic [J]. Journal of Materials Processing Technology，274, 116291, 2019. 4. Min Yeop Kim; Chang Ping Li*; Rendi Kurniawan; Sang Tae Jung; Tae Jo Ko. Experimental Investigation of Burr Reduction During EDM End-Milling Hybrid Process [J]. Journal of Mechanical Science and Technology, 2019. 5. Tang H , Zhang Z , Li C , et al. A Geometric Error Modeling Method and Trajectory Optimization Applied in Laser Welding System[J]. International Journal of Precision Engineering and Manufacturing, 2019(6). 6. Tang H , Li C , Zhang Z , et al. A novel geometric error modeling optimization approach based on error sensitivity analysis for multi-axis precise motion system[J]. 2019. 7. Li P , Qiu X , Li C , et al. Hole exit damage and tool wear during the drilling of CFRP with a double-point angle drill[J]. Journal of Mechanical Science and Technology, 2019, 33(5):2363-2370. 8. Qiu X , Li P , Li C , et al. New Compound Drill Bit for Damage Reduction in Drilling CFRP[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, 6(1):75-87. 9. Rendi Kurniawan, Saood Ali, Ki Moon Park, Chang Ping Li, Tae Jo Ko, Development of a Three?Dimensional Ultrasonic Elliptical Vibration Transducer (3D?UEVT) Based on Sandwiched Piezoelectric Actuator for Micro?grooving [J], International Journal of Precision Engineering and Manufacturing, 2019. 10. Xinyi, Qiu, Pengnan, Li, & Changping Li, et al. Study on chisel edge drilling behavior and step drill structure on delamination in drilling cfrp [J]. Composite Structures, 2018. 11. Qiu, X. , Li, P. , Niu, Q. , Chen, A. , Ouyang, P. , & Li, C. , et al. Influence of machining parameters and tool structure on cutting force and hole wall damage in drilling cfrp with stepped drills [J]. International Journal of Advanced Manufacturing Technology, 2018. 12. Sang Tae Jung, S. Thirumalai Kumaran, Chang Ping Li, Rendi Kurniawan1 and Tae Jo Ko*, Performance evaluation of micro-dimple formation on a Ti-6Al-4V alloy by using electrical discharge drilling [J], Journal of Mechanical Science and Technology 32 (9) (2018) 4365~4372. 13. Thirumalai Kumaran S , Ko T J , Li C , et al. Rotary ultrasonic machining of woven CFRP composite in a cryogenic environment[J]. Journal of Alloys & Compounds, 2017, 698:984-993. 14. Chang Ping Li, Min-Yeop Kim, Md. Mofizul Islam, Tae Jo Ko*. Mechanism analysis of hybrid machining process comprising EDM and end milling [J]. Journal of Materials Processing Technology, 2016, 237:309-319. 15. Chang Ping Li, Min Yeop Kim, Jong Kweon Park, Tae Jo Ko*. A Study on the Development of Rotary Ultrasonic Machining Spindle [J]. Journal of the Korean Society of Manufacturing Process Engineers. 2015, 14(4):160-166. 16. Md. Mofizul Islam, Chang Ping Li, Tea Jo Ko*.. Dry electrical discharge machining for deburring drilled holes in CFRP composite [J]. International journal of precision engineering and manufacturing-green technology. 2017, 4(2):149-154 17. Md. Mofizul Islam, Chang Ping Li, Sung Jae Won, Tea Jo Ko*. A deburring strategy in drilled hole of CFRP composites using EDM process [J]. Journal of Alloys and Compounds, 2017, 703:477-485. 18. Sung Jea Won, Chang Ping Li, Ki Moon Park, Tae Jo Ko*. The Exit Hole Burr Generation of CFRP with Ultrasonic Vibration [J]. Journal of the Korean Society of Manufacturing Process Engineers, 2017, 16(1):134-140. 19. Min Yeop Kim, Chang Ping Li, Jung Hyun Kim, Tae Jo Ko*. Machining Characteristics of the Hybrid Machining System Comprising of EDM and End-milling [J]. Journal of the Korean Society of Manufacturing Process Engineers. 2016,15(3):86-92. 20. Gong Y , Baik Y J , Li C P , et al. Experimental and modeling investigation on machined surfaces of HDPE-MWCNT polymer nanocomposite[J]. International Journal of Advanced Manufacturing Technology, 2016. 21. Chang Ping Li，Ki Moon Park，Mdmofizul Islam，Tae Jo Ko*，Study of Deburring on CFRP Exit Hole using EDM，International Symposium on Green Manufacturing and Applications (ISGMA 2016) ， Bali, Indonesia ， 2016.06.21-2016.06.25 22. C. P. Li，M. M. Islam，S. J. Won，Z. Yu，T. J. Ko*，Study on Effect of Feed rate on Exit Burr in Drilling of CFRP，Korean Society of Precision Engineering 2016 Spring Conference，Jeju, Korea，2016.05.11-2016.05.13 23. C. P. Li，M. Y. Kim，S. J. Won，T. J. Ko*，Study of Rotary Ultrasonic Drilling on Machining of CFRP，Korean Society of Manufacturing Process Engineers 2015 Autumn Conference ，Sacheon, Korea，2015.10.28-2015.10.30 24. Chang Ping Li，Min Yeop Kim，Ji Yong Jeong，Tae Jo Ko*，Effect of Machining Parameters on Exit Crack in Ceramics Using Rotary Ultrasonic Drilling，Korean Society of Mechanical Engineers 2015 Autumn Conference，Jeju , Korea， 2015.10.07-2015.10.09 25. Chang Ping Li，Min Yeop Kim，Tae Jo Ko*，Jong Kweon Park，In Jun Yoon， Influence of Ultrasonic Vibration on Crack Generation at Hole Exit Side in Rotary Ultrasonic-drilling on Ceramics，International Symposium on Green Manufacturing and Applications (ISGMA 2015) ， Qingdao, China ， 2015.06.23-2015.06.27 26. Chang Ping Li，M.Y. Kim，T.J. Ko*，J.K. Park，A Study on Development of Rotary Ultrasonic Drilling System，Korean Society of Manufacturing Technology Engineers 2015 Spring Conference，Daejeon, Korea，2015.04.15-2015.04.17 27. Chang Ping Li，Min-Yeop Kim，Tae-Jo Ko*，Jong-Kweon Park，Design and Finite Element Simulation on Piezoelectric Ceramic Actuator for Rotary Ultrasonic Spindle ， Proceedings of the International Conference of Manufacturing Technology Engineers 2014 ， Busan, Korea ， 2014.10.08-2014.10.10 28. Chang Ping Li，Min Yeop Kim，Tae Jo Ko*，Jong Kweon Park，Investigation of the Effect of Tool Wear and Surface Roughness in Ultrasonic-assisted Milling， International Symposium on Green Manufacturing and Applications (ISGMA 2014)，Busan,korea，2014.06.24-2014.06.28 29. Chang Ping Li，M.Y. Kim，T.J. Ko*，J.K. Park，A Study on Development of Horn of Spindle with Axial Ultrasonic Vibration，The Korean Society of Manufacturing Technology Engineers 2014 Spring Conference ， Changwon, Korea ， 2014.04.09-2014.04.11 30. Chang Ping Li，Min Yeop Kim，Tae Jo Ko*，Jong Kweon Park，The Effects of Ultrasonic Vibration on Surface Finish and Tool Wear in End-milling Machining， International Conference on 3M-NANO，Xian，China, 2012.08.29-2012.09.01 31. 李树健,李常平,牛秋林,李鹏南,唐思文.机制专业课程教学存在的问题及解决思路探讨[J].教育现代化,2019,6(79):75-76. 32. 王春浩,李鹏南,李树健,邱新义,邹适,李常平,牛秋林,余振.CFRP 钻削加工过程的分层缺陷研究进展[J].兵器材料科学与工程,2019,42(06):109-115. 33. 冷小龙, 李鹏南, 邱新义,牛秋林,李常平. 阶梯钻钻削碳纤维复合材料-钛合金叠层板刀具磨损试验研究[J]. 宇航材料工艺, 2018, 48(2):86-90. 34. 冷小龙,李鹏南,邱新义,牛秋林,李常平.阶梯钻钻削钛合金实验[J].宇航材料工艺,2018,48(04):75-79. 35. 李树健,湛利华,李常平,李鹏南,周长庚.树脂基复合材料热压成型工艺数值模拟研究进展[J].宇航材料工艺,2018,48(01):10-15. 36. 冷小龙,李鹏南,邱新义,牛秋林,李常平.钻削工艺对复合材料/金属叠层板孔质量的影响[J].兵器材料科学与工程,2018,41(01):47-51. 37. 冷小龙,李鹏南,邱新义,牛秋林,李常平.阶梯钻钻削碳纤维复合材料/钛合金叠层板的实验研究[J].兵器材料科学与工程,2017,40(06):5-9. 38. 许磊,李鹏南,邱新义,牛秋林,李常平.基于WPT 技术的超声辅助加工系统研究进展[J].宇航材料工艺,2017,47(05):1-6. 专利情况 39. Ko, T. J.，Kim, M. Y., Li, C. P., Park, J. K., Non, S. G. Spindle electro discharge machining device with ultrasonic vibration.专利号：1016048500000 (授权日 2016.03.14，韩国专利局，发明专利) 40. 李常平,李树健,李鹏南,高泰祖(外),牛秋林,唐思文等，花瓣式自行车旋转停车机构，ZL201821546813.0，2019.05.03，实用新型 41. 李树健，李常平,李鹏南牛秋林,唐思文，一种回火炉烧嘴的管道系统， ZL201710766444.X，2018.04.17，发明专利 42. 李树健，李常平,李鹏南牛秋林,唐思文，用于测试复合材料 Ω 形构件拉脱性能的夹具，ZL201721100791.0，2018-03-02，实用新型 ● 获奖情况 43. 李常平等，基于路灯基杆的花瓣式自行车旋转停车机构，大学生机械创新大赛，一等奖，湖南省教育厅 44. 李常平等，一种平移下置式便捷停车装置，大学生机械创新大赛，三等奖，湖南省教育厅