姓名：樊江磊，副教授，硕士生导师

电话：
邮箱：JLFan2011@163.com


个人基本情况
2012年毕业于哈尔滨工业大学，获工学博士学位。
机电工程学院工程力学与材料中心教师。
主要研究方向：金属材料成型与凝固技术、摩擦磨损与表面技术、增材制造原理与工艺。
研究内容包括：钛铝合金的液态成型与凝固组织控制，多元锡基合金凝固行为与组织控制，高速摩擦材料制备与性能测试，液态金属3D打印成型原理与工艺。
开设课程：本科生课程：《工程材料与热处理》、《工程材料成形基础》，研究生课程《金属凝固原理》、《现代材料技术》、《材料科学与工程基础》。
近年的科研项目、专著与论文、专利、获奖
近年来主持国家自然基金项目、河南省科技开放合作项目各1项；发表学术论文50余篇，其中SCI收录20余篇；授权发明专利5项；获得省部级科技进步二等奖3项，河南省国防科技进步一等奖2项，郑州市科技进步一等奖、二等奖各1项。

承担的科研项目：
(4) 郑州轻工业大学众创空间孵化项目郑州轻工业大学众创空间孵化项目，高铁制动铜基摩擦材料增材制造关键技术研究，2020-2021，主持。
(3) 河南省高等学校青年骨干教师培养计划项目，定向凝固钛铝合金用铸型材料成分设计与结构调控，2019-2021，主持。
(2)国家自然基金青年基金，定向凝固单晶TiAl合金非择优取向调控及生长稳定性研究，2016-2018，主持。
(1)河南省科技厅开放合作项目，含金属间化合物相四元无铅钎料凝固机制及组织制备及性能研究，2015-2018，主持。

荣誉与奖励：
(8) 铝合金节能熔炼和高性能材料制备关键技术及其应用，河南省人民政府教育厅，科技成果，二等奖，2019；
(7) 高速重载轴瓦界面改性扩散一体化技术及应用，河南省人民政府，科技进步，二等奖，2019；
(6)高速重载轴瓦界面改性与连接技术及应用，中国机械工业联合会，中国机械工程学会，科技进步奖，二等奖，2018；
(5)复杂曲面机械产品成型工艺及性能加测关键应用技术，河南省科技进步奖，二等奖，2017；
(4)制冷行业专用钎料的研发及应用，郑州市科技进步奖，一等奖，2014年；
(3)热核聚变装置超低温冷却管钎焊材料与技术开放及应用，河南省国防科技进步奖，一等奖，2013；
(2)板翅式散热器及其钎焊技术开发，河南省国防科技进步奖，一等奖，2013；
(1)光学镜架用钎料开发，郑州市科技进步奖，二等奖，2013；
专利：
(5) 一种碳化钨增强铜基粉末冶金摩擦材料及其制备方法，专利号：ZL4.2
(4) 一种Sn-Cu-Co-Ni无铅焊料及其制备方法，发明专利，专利号：ZL3.4
(3) 一种利用3D打印装置制备摩擦材料的方法，发明专利，专利号：ZL.2
(2) 一种大型熔炼炉用均匀自动加料装置，发明专利，专利号：ZL6.X
(1) 一种具有压紧提升机构的组合式炉门，发明专利，专利号：ZL3.5

著作：
(1) 《机械工程材料》，副主编，机械工业出版社，2017年8月出版。
发表论文：

(26) Fan Jianglei*, Zhai Hengtao, Liu Zhanyun, Wang Xiao, Li Ying, Gao Hongxia, Liu Jianxiu, Effect of Ni Content on the Microstructure Formation and Properties of Sn-0.7Cu-xNi Solder Alloys [J]. Journal of Materials Engineering and Performance. 2020, 29(8): 4934-4943(SCI, IF: 1.65)
(25) Fan Jianglei*, Liu Zhanyun, Zhai Hengtao, Wang Xiao, Wang Yan, Li Ying, Zhou Xiangkui, Wu Shen, Liu Jianxiu. Effect of Co content on the microstructure, spreadability, conductivity and corrosion resistance of Sn-0.7Cu alloy [J]. Microelectronics Reliability. 2020, 107: 113615 (SCI, IF: 1.70)
(24) Fan Jianglei*, Zhai Hengtao, Liu Zhanyun, Wang Xiao, Zhou Xiangkui, Wang Yan, Li Ying, Gao Hongxia, Liu Jianxiu. Microstructure Evolution, Thermal and Mechanical Property of Co Alloyed Sn-0.7Cu Lead-Free Solder [J]. Journal of Electronic Materials. 2020, 49(4): 2660-2668 (SCI, IF: 1.64)
(23)Yang Song, Jianglei Fan*, Shen Wu, Jianxiu Liu, Chi Zhang, Yuwen Li. Effect of carbon-fibre powder on friction and wear properties of copper-matrix composites [J]. Materials Science and Technology. 2020, 36(1): 92-99(SCI, IF: 1.938)
(22)Jianglei Fan*, Liubo Liang, Zhanyun Liu, Yuwen Li, Ying Li, Hongxia Gao, Shen Wu, Yan Wang, Xiao Wang. Recent research and development of mould materials for casting TiAl alloys [J]. Materials Science and Technology. 2019, 35(8): 891-899(SCI, IF: 1.938)
(21) Fan Jianglei*, Liu Zhanyun, Guo Yanhong, Wang Xingxing, Wu Shen, Li Yuwen, Wang Xiao, Liu Jianxiu. Effect of Ni layer on the microstructure evolution and mechanical property of Cu-based bearing shell with aging treatment [J]. Materials Chemistry and Physics. 2018, 217: 527-532 (SCI, IF: 2.781)
(20) Fan Jianglei*, Zhang Chi, Wu Shen, Jia Dejin, Sun Lulu, Li Yuwen, Liu Jianxiu. Effect of Cr–Fe on friction and wear properties of Cu-based friction material [J]. Materials Science and Technology. 2018, 34(7): 869-875 (SCI, IF: 1.938)
(19) 樊江磊*，刘占云，李育文，吴深，王霄，刘建秀. Sn-Cu系无铅钎料微合金化研究进展. 材料导报. 2018, 32A(21): 3774-3779 (EI)
(18) Jianglei Fan^*, Chi Zhang, Shen Wu, Hongxia Gao, Xiao Wang, Jingjie Guo, Effects of solidification parameters on the growth direction of α phase in directionally solidified Ti-49Al alloy, Intermetallics, 2017, 90: 113-118 (SCI, IF: 3.353)
(17) Jianglei Fan^*, Jianxiu Liu^*, Shen Wu, Shuxia Tian, Hongxia Gao, Shengyong Wang, Jingjie Guo, Xiao Wang, Microstructure formation and interface characteristic of directionally solidified TiAl-Si alloy in alumina crucible with new Y₂O₃skull-aided technology, Scientific Reports, 2017, 7: 45198 (SCI, IF: 4.122)
(16) 樊江磊^*，王星星，吴深，王霄，高红霞，刘建秀. Ni层对时效处理离心浇铸铜基轴瓦组织和性能的影响. 材料导报. 2017, 31(20): 68-72 (EI)
(15) 樊江磊^*，吴深，高红霞，王胜永，田淑侠，王霄，刘建秀. TiAl合金片层取向控制研究进展. 材料导报. 2016, 30(23): 74-80, 95 (EI)
(14) Jianglei Fan^*, Jianxiu Liu, Shuxia Tian, Shen Wu, Shengyong Wang, Hongxia Gao, Jiangjie Guo, Xiao Wang, Yanqing Su, Hengzhi Fu, Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy, Journal of Alloys and Compounds. 2015, 650: 8-14 (SCI, IF: 4.175)
(13) J. Fan^*, J. Guo, S. Wang, S. Tian, Y. Su, J. Liu, H. Fu, Microstructure evolution and interfacial reaction of TiAl–Si alloy solidified in alumina crucible, Materials Science and Technology, 2015, 31(14): 1727-1734 (SCI, IF: 1.938)
(12) 樊江磊^*，龙伟民，王星星，郭艳红，张冠星. 夹杂物对Ag-Cu-Zn钎料凝固组织和性能的影响. 焊接学报. 2015, 36(05): 1-4 (EI)
(11) J. Fan^*, J. Guo, W. Long, Y. Su, X. Li, F. Li, H. Fu, Lamellar orientation control of directionally solidified Ti-46Al-0.5W-0.5Si alloy by self-seeding technology, Materials Science and Technology, 2014, 30(2): 183~188 (SCI, IF: 1.938)
(10) Jianglei Fan^*, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, Effect of growth rate on microstructure parameters and microhardness in directionally solidified Ti-49Al alloy, Materials and Design, 2012, 34: 552-558 (SCI, IF: 4.525)
(9) Fan Jiang-Lei^*, Li Xin-Zhong, Su Yan-Qing, Chen Rui-Run, Guo Jing-Jie, Fu Heng-Zhi. Effect of thermal stabilization on microstructure and mechanical property of directionally solidified Ti–46Al–0.5W–0.5Si alloy. Transactions of Nonferrous Metals Society of China. 2012, 22(5): 1073-1080 (SCI, IF: 1.795)
(8) Li Xinzhong*, Fan Jianglei, Su Yanqing, Liu Dongmei, Guo Jingjie, Fu Hengzhi. Lamellar orientation and growth direction of α phase in directionally solidified Ti-46Al-0.5W-0.5Si alloy. Intermetallics. 2012, 27: 38-45 (SCI, IF: 3.353)
(7) Jianglei Fan^*, Xinzhong Li, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu. Directional solidification of Ti–49at.%Al alloy, Applied Physics A, 2011, 105(1): 239-248 (SCI, IF: 1.455)
(6)Jianglei Fan^*, Xinzhong Li*, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Materials Chemistry and Physics, 2011, 130(3): 1232-1238 (SCI, IF: 2.781)
(5) Jianglei Fan, Xinzhong Li^*, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Journal of Crystal Growth, 2011, 337(1): 52-59 (SCI, IF: 1.751)
(4) Jianglei Fan^*, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, Dependency of microhardness on solidification processing parameters and microstructure characteristics in the directionally solidified Ti–46Al–0.5W–0.5Si alloy, Journal of Alloys and Compounds, 2010, 504(1): 60-64 (SCI, IF:4.175)
(3) Fan Jianglei^*, Li Xinzhong, Su Yanqing, Guo Jingjie, Fu Hengzhi. The microstructure parameters and microhardness of directionally solidified Ti–43Al–3Si alloy. Journal of Alloys and Compounds. 2010, 506(2): 593-599 (SCI, IF: 4.175)
(2)李新中*，樊江磊，郭景杰，苏彦庆，傅恒志.定向凝固Ti—43Al—3Si合金的组织演化规律Ⅱ.稳态生长区组织演化规律.金属学报. 2009, 45(03): 308-313 (SCI, IF: 0.584)
(1) 樊江磊^*，李新中，郭景杰，苏彦庆，傅恒志. 定向凝固Ti—43Al—3Si合金的组织演化规律Ⅰ.初始过渡区组织演化规律. 金属学报. 2009, 45(03): 302-307 (SCI, IF: 0.584)