白成英部门：材料科学与化学工程学院

学科：材料科学与工程

职务：

职称：讲师

指导
资格：
电话：**

传真：**

邮箱：chengyingbai@163.com

邮编：150001

地址：哈尔滨工程大学基础楼（材化楼）122室


个人简介
白成英，男，1986年生，汉族，河北邢台人，工学博士。硕士毕业于海南大学材料物理与化学专业，师从李建保教授（国家杰出青年基金获得者）和邓湘云教授（“新世纪百千万人才工程”国家级人选）。硕士期间获海南省优秀硕士毕业论文，作为学生参与863子课题一项，国家自然科学基金两项。硕士毕业后，以优异成绩获得国家公派留学奖学金到意大利帕多瓦大学攻读博士学位，导师Paolo.Colombo 教授（世界陶瓷学会院士、欧洲科学院院士）。
研究方向为多孔陶瓷及多孔新型建筑材料，发表SCI论文近20篇，1篇入选基本科学指标数据库ESI,1%高被引论文。受邀为《Journal of Materials Science》，《Journal of hazardous materials》，《Materials & design》,《Journal of the European Ceramic Society》,《Construction & Building Materials》, 《Journal of Cleaner Production》，《Journal of Alloys and Compounds》等陶瓷材料、资源与环境、土木工程材料等领域SCI期刊审稿人。
Dr. Chengying Bai is currently lecturer of Institute of Composite Materials at College of Materials science and chemical engineering, Harbin Engineering University, China. He got his Master’s degree in 2014 from Hainan University with Prof. Jianbo Li and Prof. Xiangyun Deng as supervisor. He received his Ph. D degree from University of Padova (Italy) in 2018 with Prof. Paolo Colombo as supervisor. He is currently a reviewer for over 10 journals, including J Eur Ceram Soc., J Hazard Mater., J Clean Prod., Materials & Design, etc. He has published more than 20 papers in the international journals with 307 citations and H-index of 11 (google scholar), and He has been serving as an editorial board member of Journal of Building Material Science since 2018. His current research interests focus on porous ceramics, porous geopolymer, 3D printing, and solid waste management etc.



教育经历
11/2014-09/2018
PhD of Industrial Engineering in University of Padova (CSC,Italy)
博士 材料工程 工业工程系 帕多瓦大学(国家基金委公派留学)
09/2011-07/2014
Master of Materials and Chemical Engineering Institute in Hainan University (211)
硕士 材料物理与化学 材料与化工学院 海南大学（211）
09/2006-06/2010
Bachelor of Environmental and Chemical Engineering in Tangshan College
学士 无机非金属材料工程 环境与化学工程系 唐山学院


工作经历
11/2018-
哈尔滨工程大学 材料科学与化学工程学院 复合材料研究所 讲师(高聘副教授)
Lecturer of Institute of Composite Materials at College of Materials science and chemical engineering, Harbin Engineering University, China.
研究方向
1. 多孔陶瓷及其复合材料（碳化硅陶瓷、莫来石陶瓷等）；
Porous ceramcis and porous ceramics-based composites(SiC, Mullite etc.)
2. 多孔地质聚合物及其复合材料（树脂-地聚合物，木材-地聚合物，沸石-地聚合物等）；
Porous geopolymer and porous geopolymer-based composites(resin-geopolymer, wood-geopolymer, zeolite-geopolymer)
3. 3D打印成型技术；
3D printing technique
4. 污水处理，及固体废弃物利用；
Waste water treatment, and solid waste management.
5. 新型建筑材料
New type of building materials


承担项目
国家十二五863计划，2012AA03A610，复合碳化硅精细过滤膜材料规模化制备技术研究（高温气体净化膜材料及其规模化制备技术子课题），649万元，已结题，2012/1-2015/1 参加国家自然科学基金地区科学基金项目，**，透明石墨烯量子点/石英玻璃块体复合材料的制备和性能，50万元，2013/01-2016/12,已结题，参加国家自然科学基金地区科学基金项目，**，利用海南石英砂资源制备氮化硅陶瓷及氮化硼纳米管增韧，已结题，51万元，2014/01-2017/12，参加

学术交流
1. 15th Conference & Exhibition of the European Ceramic Society 2017 Hungary (EcerS 2017,Oral presentation 2017**; High-porosity foamed geopolymers by the frothing/peroxide route for water purification and thermal insulation)口头报告
2. Geopolymer camp 2016 France (Oral presentation 2016**; High strength open cell geopolymer foams with variable macro-porous structure) 口头报告
3. 6th International Congress on Ceramics 2016 Germany (ICC6, Oral presentation 2 016**; High strength metakaolin-based geopolymer foams with well controlled hierarchically macroporous structure) 口头报告
4. Geopolimeri: applicabilità ed applicazioni.Dai cantieri all'industria Italy (Geopolymer day, Poster, **; Foaming of geopolymers) 海报
5. 14th International Conference of the European Ceramic Society 2015 Spain (EcerS 2015,Poster, 2016**; Open cell geopolymer foams) 海报

招生信息
研究生2-3名/年

本科生授课课程
研究生授课课程
实践性教学
教学研究课题
社会兼职
2018年7月-至今，《Journal of Building Material Science》编委
201807- Editorial board member of 《Journal of Building Material Science》


专利成果
邓湘云, 白成英,李建保,等 一种复合碳化硅陶瓷纤维过渡层的涂覆方法.（已授权，专利号 ZL 2012 1 **.1 证书号 第 **号）邓湘云, 白成英,李建保,等 高温过滤用碳化硅陶瓷膜的涂覆方法（已授权,专利号 ZL 2013 1 **.0 证书号 第 **号）

出版著作


发表论文
入职后发表论文

1.Chengying Bai? Hongqiang Li, Enrico Bernardo, Paolo Colombo. Waste-to-resource preparation of glass-containing foams from geopolymers[J]. Ceramics International, 2019.6(45) 7196-7202.
2.Zheng, T., Wang, X., Lu, C., Zhang, X., Ji, Y., Bai, C,.Chen Y, Qiao Y.2019. Studies on Curing Kinetics and Tensile Properties of Silica-Filled Phenolic Amine / Epoxy Resin Nanocomposite[J]. Polymers, 2019.11.680.1-13.


硕博期间发表论文

1 Chengying Bai*, and Paolo Colombo. Processing, properties and applications of highly porous geopolymers: A review. Ceramics International，2018，44（10）16103-16118.(SCI)
（最高下载量论文 top5）
2 Chengying Bai*, Tao Ni, Qiaoling Wang, Hongqiang Li, Paolo Colombo. Porosity, mechanical and insulating properties of geopolymer foams using vegetable oil as the stabilizing agent[J]. Journal of the European Ceramic Society, 2018, 38(2): 799-805.
(SCI)
3 Chengying Bai*, Jian Zheng, Gian Andrea Rizzi, Paolo Colombo. Low-temperature fabrication of SiC/geopolymer cellular composites[J]. Composites Part B: Engineering, 2018, 137: 23-30.
(SCI)
4 Chengying Bai?, Giorgia Franchin, Hamada Elsayed, Alberto Conte, Paolo Colombo. High strength metakaolin-based geopolymer foams with variable macroporous structure[J]. Journal of the European Ceramic Society, 2016, 36(16): 4243-4249.(SCI)
5 Chengying Bai*, and Paolo Colombo. High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant[J]. Ceramics International, 2017, 43(2): 2267-2273.(SCI)
6 .Chengying Bai?, Alberto Conte, and Paolo Colombo. Open-cell phosphate-based geopolymer foams by frothing. Materials Letters 2017，188: 379-382. (SCI)
7 Chengying Bai?, Giorgia Franchin, Hamada Elsayed, Alessandro Zaggia, Lino Conte, Hongqiang Li, Paolo Colombo. High-porosity geopolymer foams with tailored porosity for thermal insulation and wastewater treatment[J]. Journal of Materials Research, 2017, 32(17): 3251-3259. (SCI)
8 Bai, C. Y., Li, Y., Liu, Z. M., Liu, P. W., Deng, X. Y., Li, J. B., & Yang, J. (2015). Fabrication and properties of mullite-bonded porous SiC membrane supports using bauxite as aluminum source. Ceramics International, 41(3), 4391-4400. (SCI)
9 BAI Cheng-ying, DENG Xiang-yun, LI Jian-bao, JING Ya-ni, JIANG Wen-kai, LIU Zhang-min, LI Yu. Fabricationand properties of cordierite-mullite bonded porous SiC ceramics. Ceramics International.2014,4(40) 6225-6231(SCI)
10 BAI CHENG-ying, LI Jian-bao, JING Ya-ni, JIANG Wen-kai. Preparation and properties of mullite-bonded porous SiC ceramics using porous alumina as oxide. Materials Characterization. 2014, 90: 81-87 (SCI).

11 Li, Y., Bai, C. Y., Deng, X. Y., Li, J. B., Jing, Y. N., & Liu, Z. M. (2014). Effect of V 2 O 5 addition on the properties of reaction-bonded porous SiC ceramics. Ceramics International, 40(10), 16581-16587. (SCI)
12 Yani Jing, Xiangyun Deng, Jianbao Li, Chengying Bai, Wenkai Jiang, Fabrication and properties of SiC/mullite composite porous ceramics, Ceramics International. 2014,40(1) 1329-1334(SCI)
13 Jiang, W., Luo, S., Liu, P., Deng, X., Jing, Y., Bai, C., & Li, J. (2014). Purification of biosilica from living diatoms by a two-step acid cleaning and baking method. Journal of Applied Phycology, 26(3), 1511-1518. (SCI)
14 Zhang X, Li H, Liu L, Bai C,et al. Thermodynamic and economic analysis of biomass partial gasification process[J]. Applied Thermal Engineering,129, 2018,410-420.(SCI)
(ESI 高被引论文)
15 Zhang X, Li H, Liu L, Bai C,et al. Exergetic and exergoeconomic assessment of a novel CHP system integrating biomass partial gasification with ground source heat pump[J]. Energy Conversion and Management,156, 2018,666-679.(SCI)
16 Zhang, X., Li, H., Liu, L., Bai, C., Wang, S., Song, Q.,. & Zhang, G. (2018). Optimization analysis of a novel combined heating and power system based on biomass partial gasification and ground source heat pump. Energy Conversion and Management, 163, 355-370.(SCI)

17 Chengying Bai, Zhangmin Liu, Yani Jing, Xiangyun Deng, Jianbao Li, Yu Li, Wenkai Jiang, Xinxing Liao. Effect of Al(OH)3 Addition on the Properties of SiC/Al2O3 Composite Porous Ceramics. Advanced Materials Research, 821(2013), 1208-1212. (EI)
18 Yani Jing, Chengying Bai, Wenkai Jiang, Xinxing Liao, Xiangyun Deng, Jianbao Li, Fabrication and properties of porous SiC-cordierite ceramics, Advanced Materials Research, 803 (2013): 230-234 (EI)
19 Kuifan Su, Liming Wang ,Xiangyun Deng, Jianbao Li, Chunpeng Wang,.Guoqing Zhang, Yani Jing and Chengying Bai. Preparation SiC Ceramic composite Filtration Membrane materials by Dry Pressing and Synchronous sintering method. Advanced Materials Research, 2013,690-693:409-414 (EI)

20 白成英, 苏魁范, 邓湘云, 等. 氧化结合法制备多孔碳化硅陶瓷及其特性[J]. 硅酸盐通报, 2013, 32(9): 1699-1703.
苏魁范, 邓湘云, 李建保, 王春鹏, 张国庆, 景亚妮, & 白成英. (2013). 复合碳化硅陶瓷过滤膜材料的制备及表征. 膜科学与技术, (2), 18-23.
21 景亚妮, 邓湘云, 李建保, 白成英, 蒋文凯, 李誉, & 刘张敏. (2013). SiC/莫来石复相多孔陶瓷气孔率和强度的影响因素. 硅酸盐通报, 32(10), 1979-1983.
22 刘鹏玮, 蔡强, 白成英, 邓湘云, 李建保, 刘张敏, ... & 朱飘. (2015). 不同铝源制备莫来石结合碳化硅多孔陶瓷及性能研究. 材料导报, (2015 年 20), 60-63.
23 刘张敏, 邓湘云, 白成英, 李誉, 刘鹏玮, & 王丰喜. (2015). 多孔碳化硅复合陶瓷的制备与性能研究. 中国陶瓷, 51(10), 11-17.
景亚妮, 邓湘云, 李建保, 白成英, 蒋文凯, 李誉, & 刘张敏. (2013). 多孔碳化硅/莫来石复合陶瓷的制备及性能研究. 中国陶瓷, 49(12), 14-18.
24 王春鹏, 苏魁范, 邓湘云, 李建保, 王黎明, 张国庆, ... & 白成英. (2013). 碳化硅多孔陶瓷支撑体的制备及性能研究. 中国陶瓷, (5), 13-16.
荣誉
白成英（1/1）,卓越审稿人, Materials letters， 2016（白成英）；
白成英（1/1）,卓越审稿人, Journal of cleaner production， 2018（白成英）；
白成英（1/1）,卓越审稿人, Journal of alloys and compounds， 2018（白成英）。

奖励
白成英（1/2）,高温除尘用复合碳化硅多孔陶瓷制备及性能研究,海南省教育厅/海南省学位委员会，海南省优秀硕士论文, 省厅级,2015（白成英，李建保）




个人学术信息链接

ResearcherID: W-3933-2018
http://www.researcherid.com/rid/W-3933-2018

ORCiD: 0000-0003-2555-2330
https://orcid.org/0000-0003-2555-2330

Publons
https://publons.com/researcher/**/chengying-bai/

https://publons.com/a/**

Scopus Author ID: **
https://www.scopus.com/authid/detail.uri?authorId=**

Researchgate
https://www.researchgate.net/profile/Chengying_Bai?ev=hdr_xprf&_sg=XAU5Lis6u7sp4igQ-er6_FeKrZgr7nLTcyxy-Dd0Y2QQ1te3_rxoU3WQyBiPhfWC2CCAYCJkZs-d9DbCsCRnsWeb

中国知网学者圈
http://xuezhe.cnki.net/bcybcb

谷歌学术
https://citations1.glgoo.top/extdomains/scholar.google.com.hk/citations?user=LlBdEyMAAAAJ&hl=zh-CN&oi=ao

百度百科
https://baike.baidu.com/item/%E7%99%BD%E6%88%90%E8%8B%B1/**?fr=aladdin

百度学术
http://xueshu.baidu.com/scholarID/CN-BG8UI5YJ


自定义模块2



自定义模块3