删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Working Principle and Error Analysis for Hemispherical Resonator Gyro under Force-rebalance Mode

本站小编 哈尔滨工业大学/2019-10-24

Working Principle and Error Analysis for Hemispherical Resonator Gyro under Force-rebalance Mode

Hong-Bo Zhao, Shun-Qing Ren

Space Control and Inertial Technology Research Center, Harbin Institute of Technology, Harbin 150001,China



Abstract:

The two control methods, namely the general-control and the quadrature-control modes for HRG under force-rebalance mode were introduced firstly. Then the azimuth of antinode on the hemispherical resonator was deduced. The dynamics equations of resonator under the nonuniformity of density distribution were established by way of Bubonov-Galerkin method which is commonly used for solution of differential equations, and the state equation was established through the dynamics equations. The analytic solutions of the vibration displacement and the velocity were achieved by solving the state equation, and then the ratio of rebalance excitation to primary excitation was derived under the two working modes, thus the estimation of input angular rate of HRG were obtained. By comparing and calculating these two modes, the error caused by resonator’s machining defects can be greatly inhibited under quadrature-control, and the fourth harmonic density error’s tolerance were calculated to ensure the accuracy of HRG under these two modes.

Key words:  hemispherical resonator gyro  force-rebalance mode  quadrature-control  density distribution nonuniformity

DOI:10.11916/j.issn.1005-9113.2013.01.014

Clc Number:U666.1

Fund:


相关话题/Working Principle and Error Analysis