删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Numerical simulation of thermodynamics coupling in hot forming process of elliptical head used in po

本站小编 哈尔滨工业大学/2019-10-24

Numerical simulation of thermodynamics coupling in hot forming process of elliptical head used in power station

HOU Zhen-xiu, XI Ning-ning, DONG Kai-chen, ZHOU Zhi-wei, HU Xing-hong

Dept. of Electrical Engineering,Harbin Institute of Technology,Harbin 150001,China



Abstract:

To reduce the time of getting an ideal elliptical heat used in power station through repairing and testing a die repeatedly according to experience,finite element software Deform-3D was used to research the simulation of deformation-heat transfer coupling in hot forming process of elliptical head with the size of Φ1200 mm ×100 mm. The variations of stress,stain,temperature,thickness and strain rate in forming process were gotten,and the forming quality was evaluated from roundness,thinning rate and thermal contraction. The results show that the maximum thinning rate of the elliptical head is 7. 31% ,it is close to the orthographic place; and the inner diam- eter obtained from simulation is 1200. 6 - 1202. 977 mm,it is in the range of inner diameter tolerance required; all the data fit well with the practical dimension data of processing head.

Key words:  elliptical head  deformation-heat transfer coupling  numerical simulation  strain rate  thinning rate

DOI:10.11916/j.issn.1005-9113.2012.01.005

Clc Number:TH49

Fund:


相关话题/Numerical simulation thermodynamics coupling in