删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Seismic Behaviour of Beam-Column Joints of Precast and Partial Steel Reinforced Concrete

本站小编 哈尔滨工业大学/2019-10-23

Seismic Behaviour of Beam-Column Joints of Precast and Partial Steel Reinforced Concrete

Wanpeng Cheng, Licheng Wang, Yupu Song,Jun Wang

(State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China)



Abstract:

A beam-column joint of precast and partial steel reinforced concrete (PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading. Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete (RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition, the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens, followed by column failure and connections failure. The failure of the core joint region occurs finally. Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.

Key words:  precast and partial steel reinforced concrete (PPSRC)  beam-column joints  low cyclic test  hysteretic curve  degradations of strength and stiffness  ductility

DOI:10.11916/j.issn.1005-9113.2015.02.016

Clc Number:TU375.4

Fund:


相关话题/Seismic Behaviour Beam-Column Joints Precast and Partial