删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Stress and Deformation Analysis of Cylinder-Crown IntegratedHydraulic Press with Large Capacity

本站小编 哈尔滨工业大学/2019-10-23

Stress and Deformation Analysis of Cylinder-Crown IntegratedHydraulic Press with Large Capacity

Weiwei Zhang1,2, Xiaosong Wang1,2,Zhongren Wang1,2

(1.School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150090,China;2.National Key Laboratory of Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China)



Abstract:

Cylinder-crown integrated hydraulic press (CCIHP) is a new press structure. The hemispherical hydraulic cylinder also functions as a main portion of crown, which has lower weight and higher section modulus compared with the conventional hydraulic cylinder and press crown. In order to design cylinder-crown integrated hydraulic press with large capacity, the theoretical design of hemispherical hydraulic cylinder was first proposed, and the structural parameters of 150 MN CCIHP were listed. Then the simulation was carried out to analyze the stress and deformation of CCIHP, and weight comparison was conducted between CCIHP and conventional press. It is shown that the weight reduction for hydraulic cylinder and press crown is about 20% compared with that for conventional press, and the stress and deformation are both within the range of constraints including strength and stiffness conditions. It is possible to manufacture cylinder-crown integrated hydraulic press with large capacity.

Key words:  cylinder-crown integrated hydraulic press  strength theorem  thick-walled sphere

DOI:10.11916/j.issn.1005-9113.2015.06.007

Clc Number:TG394

Fund:


相关话题/Stress and Deformation Analysis Cylinder