删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Establishment and Application of UFC-ACC Heat Transfer Coefficient Model

本站小编 哈尔滨工业大学/2019-10-23

Establishment and Application of UFC-ACC Heat Transfer Coefficient Model

Tian-Liang Fu, Zhao-Dong Wang, Yong Li, Jia-Dong Li, Guo-Dong Wang

(The State Key Lab of Rolling and Automation, Northeastern University, Shenyang 110819, China)



Abstract:

Based on medium plate runout table ultra-fast cooling (UFC)-accelerated cooling equipment (ACC) system, a heat transfer coefficient model was constructed. Firstly, according to the measured data, heat transfer coefficients under different roll speed and water volume were calculated by using an inverse heat conduction method. Secondly, a monofactorial heat transfer coefficient calculation formula was obtained. Finally, the heat transfer coefficient model based on medium plate runout table UFC-ACC system was constructed by intercept function, slope function, interaction influence function and linear or nonlinear influencing factors. The precision of these models was validated by comparing model prediction value with measured data, and the results were in good agreement with practical needs, and the average deviation was less than 5%.

Key words:  medium plate  ultra-fast cooling  heat transfer coefficient  mathematical model

DOI:10.11916/j.issn.1005-9113.2014.02.009

Clc Number:TG156.3

Fund:


相关话题/Establishment and Application UFC-ACC Heat Transfer Coefficient Model