删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Design of acquisition algorithm based on delay-finding detector for indoor GNSS signals

本站小编 哈尔滨工业大学/2019-10-23

Design of acquisition algorithm based on delay-finding detector for indoor GNSS signals

ZHONG Jie, SHEN Ying-jie, ZHAO Min-jian, LI Li-yan

Dept. of Information Science and Electronic Engineering, Zhejiang University, Hangzhou 310058,China



Abstract:

A delay-finding detector is proposed to enhance acquisition sensitivity for indoor GNSS signals. Traditionally, the over-threshold detector on amplitude or peak-to-mean ratio is employed for signal acquisition. Instead, the proposed detector exploits peak positions of successive multiple detections covering a full range of code phase offset to refine the detection performance. Due to each peak position corresponding to an optimal estimate of current code delay, the new detector is named delay-finding detector. On the other hand, a pre-detection processing involved in delay-finding detector aims at confronting the indoor multipath effects. A time domain filter is applied to combine the power of inner-chip multipath components. In addition, a self-adaptive method for dynamically adjusting integration time is designed to further enhance acquisition efficiency in the whole algorithm. The simulation results demonstrate that the proposed algorithm is capable of acquiring the signal when the Carrier-to-Noise Ratio is as low as 22 dB-Hz, fixing the residual Doppler offset at the worst situation. It is capable of increasing detection probability significantly for two-path channel.

Key words:  Indoor  sensitiviy  multipath  acquistion  delay-finding detector

DOI:10.11916/j.issn.1005-9113.2012.05.002

Clc Number:TN961

Fund:


相关话题/Design acquisition algorithm based delay