姓 名：
王进

职称职务：
讲师


联系方式：
邮箱：Jin.wang@hebut.edu.cn
电话：**


研究方向：
1、燃气轮机传热与冷却技术
2、换热器强化传热和凝结换热研究
3、钢铁冶金技术
4、新能源利用与开发（太阳能、风能）
5、工业燃烧技术（热水器、炉膛、气缸）
6、堤坝水利计算


个人简介：
东北大学，动力工程及工程热物理专业，硕士；
西安交通大学，动力工程及工程热物理专业，博士；
清华大学，动力工程及工程热物理博士后流动站，助理研究员；
瑞典隆德大学 （Lund University） 访问学者。
美国机械工程师协会会员（ASME member）；
Applied Thermal Engineering（SCI）、Heat Transfer Research（SCI）和International Journal of Thermal Sciences（SCI）的特邀审稿人。


获奖成果及专利：
发明专利：一种提高开槽气膜孔下游壁面气膜冷却效率的结构(申请号**84)


承担的科研项目：
[1]中国博士后基金面上项目“基于无网格法的燃气透平叶片流固热耦合问题的研究” （批准号：2014M560966）--负责人
[2]天津市博士后创新项目择优资助项目（天津市人社局，2013年度）--负责人
[3]国家自然科学基金“高精度间断Galerkin方法及其在叶轮机械内部流动与传热模拟中的应用研究”（批准号：**）--主要参与者
[4]国家自然科学基金国际（地区）合作与交流项目“高温换热单元能质传递强化及可靠性机理研究”（批准号：**）--主要参与者
[5]国家“973计划”：“燃气轮机热端部件冷却机理研究”（课题号：2007CB210107）--主要参与者
[6]河北省自然科学基金青年基金项目“高温熔融盐自然对流换热机理及特性研究”（批准号：E**） --主要参与者


论文及著作：
软件著作权：带纠错功能的两种换热器耦合设计计算软件--第一发明人
[1] Jin Wang, Bengt Sundén, Han Wu, Jian Yang, Chunwei Gu, Qiuwang Wang. Conjugated heat transfer analysis of a film cooling passage with turbulator ribs, Heat Transfer Research, 2014, HTR-10665 (SCI)
[2] Jin Wang, Chunwei Gu, Bengt Sundén. Conjugated heat transfer analysis of a film cooling passage with different rib configurations, International Journal of Numerical Methods for Heat & Fluid Flow, 2014, HFF-0110 (SCI)
[3] Jin Wang, Chunwei Gu, Bengt Sundén. Investigations of film cooling and its non-uniform distribution for the conjugate heat transfer passage with a compound inclined angle jet, Numerical Heat Transfer, Part A: Applications, 2014, NHT14/6397 (SCI)
[4] Jin Wang, Bengt Sundén, Min Zeng, Qiuwang Wang. Film Cooling Effects on the Tip Flow Characteristics of a Gas Turbine Blade, Propulsion and Power Research, 2014, PPR-2014-0034
[5] Jin Wang, Bengt Sundén, Min Zeng, Qiuwang Wang. Investigation on tip leakage flow with and without film cooling for a turbine blade, 22nd National and 11th ISHMT-ASME, December 28-31, 2013, IIT Kharagpur, India (Keynote Lecture)
[6] Jin Wang, Bengt Sundén, Han Wu, Jian Yang, Chunwei Gu, Qiuwang Wang. Conjugated heat transfer analysis of a film cooling passage with and without turbulator ribs, 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control, pp90-97, October 18-21, 2013, Xi’an, China
[7] Jin Wang, Bengt Sundén, Min Zeng, Qiuwang Wang. Influence of different rim widths and blowing ratios on film cooling characteristics for a blade tip. ASME Journal of Heat Transfer, 134(6) , 2012, 061701 (SCI)
[8] Jin Wang, Sundén B, Min Zeng, Qiuwang Wang. Effect of upstream wake on passage flow and tip film cooling characteristics, Proceedings of the ASME Turbo Expo 2012, June 11-15, 2012, Copenhagen, Denmark (EI)
[9] Jin Wang, Yong Yu, Min Zeng, Qiuwang Wang. Influence of passage flow on tip film cooling effectiveness characteristics, Proceedings of the ASME Turbo Expo 2012, June 11-15, 2012, Copenhagen, Denmark (EI)
[10] Jin Wang, Yong Yu, Min Zeng, Qiuwang Wang. Numerical research on film cooling characteristics of a single hole site at trailing edge, Journal of Engineering Thermophysics, 33(11), pp1954-1957, 2012 (EI)
[11] Jin Wang, Bengt Sundén, Han Wu, Min Zeng, Qiuwang Wang. Experimental investigation on the upstream wake flow characteristics near the blade leading edge, 5th International Symposium on Fluid Machinery and Fluids Engineering, October 24-27, 2012, Jeju, Korea
[12] Jin Wang, Min Zeng, Qiuwang Wang. Influence of different rim widths on leakage flow, Proceedings of the ASME Turbo Expo 2011, June 6-10, 2011, Vancouver, Canada (EI)
[13] Jin Wang, Min Zeng, Qiuwang Wang. Numerical research on heat transfer characteristics of a single film cooling hole site, Journal of Engineering Thermophysics, 32(10), pp1761-1764, 2011 (EI)
[14] Jin Wang, Dahai Zhang, Min Zeng, Qiuwang Wang. Influence of different shoulder widths on film cooling characteristics on ge-e3 blade tip, Proceedings of the ASME Turbo Expo 2010, June 14-18, 2010, Glasgow, Scotland, UK (EI)
[15] Han Wu, Jin Wang, Yining Wu, Min Zeng, and Qiuwang Wang. Numerical study of discharge coefficient in a passage with bleeding holes & internal crossflow, 4th Asian Symposium on Computational Heat Transfer and Fluid Flow, pp212-220, Hong Kong, China, 2013
[16] Jin Wang, Milan Vujanovi?, Jakov Baleta, Neven Dui?, Zvonimir Guzovi?. Effects of surface deposition and droplet injection on film cooling, The 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, September 27 - October 3, 2015, Dubrovnik, Croatia
[17] 王进，崔沛，田丽亭，顾春伟，王秋旺，开槽冷却孔结构的耦合传热特性的研究，工程热物理学报，西安，2014.10（143193）(EI)
[18] 王进，於永，曾敏，王秋旺，不同肩壁宽度对叶顶气膜冷却特性影响的数值研究，中国工程热物理年会传热传质学术会议，西安，2011.10.14-17，大会报告
[19] 王进，吴晗，喻澎清，曾敏，王秋旺，带供气腔的叶片气膜冷却特性数值研究，中国工程热物理年会传热传质学术会议，东莞，2012.11.23-26，大会报告
[20] 於永，王进，曾敏，王秋旺，不同吹风比对平顶叶片气膜冷却特性影响的数值研究，中国工程热物理年会传热传质学术会议，西安，2011.10.14-17，大会报告






【页面顶部】