姓 名
兰箭
性 别
男
民 族
汉
出生
年月
1972年9月

职 称
教授
职 务

联系
电话
**

单位
名称
材料学院材料成型与控制工程系
Email
jlan@whut.edu.cn

实验室网址


研究方向
1、运载装备核心构件近净成形加工新方法
2、轻量化及特种材料形性调控机理与应用
3、材料成形加工全过程多场多尺度数值仿真
4、基于成形工艺需求的专用设备开发

教育背景
1989/9-1993/6：华中理工大学，机械工程二系，学士。
1993/9-1996/6：华中科技大学，模具技术国家重点实验室，硕士。
1996/9-2001/4：华中科技大学，模具技术国家重点实验室，博士。

工作经历
2001/06-2001/10：华中科技大学，机械工程学院，博士后。
2001/12-2003/11：Queen’s University of Belfast，博士后。
2003/12-2004/12：大连理工大学，机械工程学院。
2005/03-2010/09：武汉理工大学材料学院，副教授。
2010/10-2017/01：武汉理工大学汽车学院，教授。
2017/02-至今：武汉理工大学材料学院，教授。

项目情况
[1] “外岛屿凸台薄壁环类件轧制聚集成形技术基础研究”，国家自然科学基金（批准号：**），项目经费60.0万元,项目起讫时间2020年1月－2023年12月。主持。
[2] “XXXXXX”,国防JPPT项目，75万元，2016年1月-2018年12月。主持。
[3] “复杂金属箔板件精密成形机理与技术基础研究”，国家自然科学基金（批准号：**），项目经费60.0万元,项目起讫时间2012年1月－2015年12月。主持。
[4] “燃料电池电堆及关键材料的研制开发”，国家863计划，项目起讫时间2008年7月－2010年12月。主持。
[5] “大型环件径轴向联合轧制成形机理研究”，模具技术国家重点实验室开放基金，项目经费1.5万元，项目起讫时间2007年5月－2009年4月。主持。
[6] “大型复杂环件径轴向联合轧制成形机理与成形性能评定”，湖北省自然科学基金，项目经费3.0万元,项目起讫时间2008年1月－2009年12月。主持。
[7] “大型环件径-轴向联合轧制成形机理研究”,国家自然科学基金（批准号：**），项目经费20.0万元,项目起讫时间2008年1月－2010年12月。主持。

代表性学术
成果
[1] LanJian, ShenXuejun, HuaLin, Strengthening mechanisms of 2A14 aluminum alloy with cold deformation prior to artificial aging, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019,745: 517-535
[2] Xie C.Y, Hua Lin, Lan Jian, Han X.H, Wan X.J, Xiong X.S, Improved analytical models for mesh stiffness and load sharing ratio of spur gears considering structure coupling effect, Mechanical Systems and Signal Processing, 2018,111: 331-347
[3] Xie C.Y, Hua Lin, Lan Jian, Han X.H, Wan X.J, Xiong X.S, Analytical formulas for gear body-induced tooth deflections of spur gears considering structure coupling effect, International Journal of Mechanical Science, 2018, 148: 174-190
[4] Hua, Lin, Deng, Jiadong, Qian, Dongsheng,Lan, Jian, Long, Hui, Modeling and application of ring stiffness condition for radial-axial ring rolling, International Journal of Machine Tools and Manufacture, November 1, 2016, 110:66-79, ISSN: **
[5] DONG Li-ying, LAN Jian, ZHUANG Wu-hao, Homogeneity of microstructure and Vickers hardness in cold closed-die forged spur-bevel gear of 20CrMnTi alloy, J. Cent. South Univ., 2015, 22: 1595?1605
[6] LAN Jian, YOU Wei, HUALin, The research on the micro damage and fracture of SUS304 stainless steel under uniaxial tension, Materials Research Innovations, 2015, 19(s8): 895-901
[7] Lan Jian, Zhang Yong, Song Changpeng and Hua Lin, Research on the Shrinkage Cavity Defect of the Extruded Boss in FineBlanking Process, Advanced Materials Research, 2011, 314-316: 695-702
[8] Lan Jian, Zhang Mianli, Mao Huajie, Shu Maosheng and Hua Lin. OPTIMUM BLANK DESIGN OF THICK-PLATE METAL FORMING WITHOUT BLANK HOLDER, NUMIFORM 2010, June 13-17, 2010：1134-1141
[9] Lan J. Dong X., Li Z., Inverse finite element approach and its application in sheet metal forming, Journal of Materials Processing Technology, 2005, 170(3): 624-631
[10] 专利13项。

Prof. LAN Jian
Address: Room 406, School of Materials Sci. & Eng.
Email：jlan@whut.edu.cn Tel: **






EDUCATION
1989/9-1993/6
Huazhong University of Science and Technology
Bachelor

1993/9-1996/6
Huazhong University of Science and Technology
Master

1996/9-2001/4
Huazhong University of Science and Technology
Doctor

WORK EXPERIENCE
2001/06-2001/10
Huazhong University of Science and Technology
Post doctor

2001/12-2003/11
Queen’s University of Belfast
Post doctor

2003/12-2004/12
Dalian University of Technology, Mechanical
Lecturer

2005/03-2010/09
Wuhan University of Technology, Materials
Associate Professor

2010/10-2017/01
Wuhan University of Technology, Automobiles
Professor

2017/02-
Wuhan University of Technology, Materials
Professor

RESEARCH PROJECT
Funds more than 4m RMB as PI





SELECTED PUBLICATION
[1] Lan Jian, Shen Xuejun, Hua Lin, Strengthening mechanisms of 2A14 aluminum alloy with cold deformation prior to artificial aging, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019,745: 517-535
[2] Xie C.Y, Hua Lin, Lan Jian, Han X.H, Wan X.J, Xiong X.S, Improved analytical models for mesh stiffness and load sharing ratio of spur gears considering structure coupling effect, Mechanical Systems and Signal Processing, 2018,111: 331-347
[3] Xie C.Y, Hua Lin, Lan Jian, Han X.H, Wan X.J, Xiong X.S, Analytical formulas for gear body-induced tooth deflections of spur gears considering structure coupling effect, International Journal of Mechanical Science, 2018, 148: 174-190
[4] Hua, Lin, Deng, Jiadong, Qian, Dongsheng,Lan, Jian, Long, Hui, Modeling and application of ring stiffness condition for radial-axial ring rolling, International Journal of Machine Tools and Manufacture, November 1, 2016, 110:66-79, ISSN: **
[5] DONG Li-ying, LAN Jian, ZHUANG Wu-hao, Homogeneity of microstructure and Vickers hardness in cold closed-die forged spur-bevel gear of 20CrMnTi alloy, J. Cent. South Univ., 2015, 22: 1595?1605
[6] LAN Jian, YOU Wei, HUA Lin, The research on the micro damage and fracture of SUS304 stainless steel under uniaxial tension, Materials Research Innovations, 2015, 19(s8): 895-901
[7] Lan Jian, Zhang Yong, Song Changpeng and Hua Lin, Research on the Shrinkage Cavity Defect of the Extruded Boss in FineBlanking Process, Advanced Materials Research, 2011, 314-316: 695-702
[8] Lan Jian, Zhang Mianli, Mao Huajie, Shu Maosheng and Hua Lin. OPTIMUM BLANK DESIGN OF THICK-PLATE METAL FORMING WITHOUT BLANK HOLDER, NUMIFORM 2010, June 13-17, 2010：1134-1141
[9] Lan J. Dong X., Li Z., Inverse finite element approach and its application in sheet metal forming, Journal of Materials Processing Technology, 2005, 170(3): 624-631
PATENT
About 13 Chinese and US patents.
INTERNATIONAL CONFERENCE
[1] Jian Lan, Mianli Zhang, Huajie Mao, Maosheng Shu and Lin Hua. OPTIMUM BLANK DESIGN OF THICK-PLATE METAL FORMING WITHOUT BLANK HOLDER, NUMIFORM 2010, June 13-17, 2010：1134-1141，Pohang University of Science and Technology, Korea，Korean Society for Technology of Plasticity
[2] Lan J., Hua L., Zuo Z., Han X., A new method of section contour filling estimatefor ring rolling, The 7^th International Conference on Frontiers of Design and Manufacutring (7^th ICFDM), 19-22 June 2006, Guangzhou, China. 中国国家自然科学基金委
[3] Lan Jian, ZuoZhijiang, Hua Lin, Han Xinghui, Quantitative evaluation of material filling behaviors for ring rolling, International Conference on Manufacturing and Material Processing (ICMM2006), 14-16 March 2006, Kuala Lumpur, Malaysia.
[4] Jian Lan, Yong Zhang, Wei Dai,Yumin Zhao, Lin Hua, The Optimization for Backward Extrusion Process of 304 Stainless Steel Cup-shape Part with Inner Boss Having Square Blind Hole, The 10^th International Conference on Technology of Plasticity,25-30 Sept., 2011, German Metal Forming Association, Aachen Germany.
[5] J. Lan, Y.L. Qiu, L. Hua, Influence of Radial & Axial Feeding on Rolling Process of Large Ring with SquareCross Section, The 10^th International Conference on Technology of Plasticity,25-30 Sept., 2011, German Metal Forming Association, Aachen Germany.
[6] Chen Ni, *Jian Lan, Zhenjun Yang and Lin Hua, STRUCTURE AND TOLERANCE DESIGN OF PEMFC METALLIC BIPOLAR PLATE BASED ON FEM AND MONTE CARLO METHODS, The 20th UK Annual Conference on Computational Mechanics, 26-28th March 2012, Association of Computational Mechanics in Engineering – UK, Manchester, UK
[7] Jian Lan, Wei Zhang, Lin Hua, Huajie Mao, The combined ring rolling process and the stiffness condition, The 4^th International Conference on New Forming Technology, 6-9 August, 2015, The Institute of Mechanical Engineers, UK, Glasgow, UK.



附件下载: