姓名
丁安心
性别
男
民族
汉
出生年月
1987.03

职称
教授
职务
复合材料系副主任
联系电话
**

单位名称
1 材料科学与工程学院复合材料系
2 材料复合新技术国家重点实验室
Email
axding@whut.edu.cn

实验室网址
http://smse.whut.edu.cn/http://sklwut.whut.edu.cn/

研究方向
复合材料技术与工程:
? 热固性树脂基复合材料固化残余应力和变形预测
? 复合材料损伤、疲劳和失效分析
? 基于FBG技术的复合材料结构健康监测
? 热塑性复合材料的制备与应用
聚合物工程
? 基于热-力耦合的聚合物行为预测
? 聚合物的松弛和蠕变研究
? 热固性树脂的固化动力学
? 聚合物老化机理

教育背景
复合材料与工程，工学博士 2013.09~2016.12
武汉理工大学材料复合新技术国家重点实验室
专业领域：复合材料结构与设计
复合材料与工程，工学硕士 2010.09~2013.06
武汉理工大学材料科学与工程学院
专业领域：复合材料结构与设计
理论与应用力学，理学学士 2006.09~2010.06
武汉工程大学机械工程学院
专业领域：理论与应用力学

工作经历
2020~至今，教授，武汉理工大学材料科学与工程学院
2019~2020，助理研究员，武汉理工大学材料科学与工程学院
2017~2019 博士后：慕尼黑工业大学（TUM）碳纤维复合材料中心 (LCC)

项目情况
[1] 国家自然科学基金青年基金，**，基于流动-应力数值模块同步耦合的大厚度复合材料结构固化行为研究，2020-01至2022-12，主持
[2] 武汉理工大学自主创新基金， ，碳纤维复合材料湿热老化的多尺度力-扩散-反应耦合数值模拟和实验研究，2020-03至2022-03，主持
[3] 武汉理工大自主创新基金， ，快速固化树脂基复合材料的固化行为研究，2020-03至2022-03，主持
[4] 中国工程物理研究院电子工程研究所，高压电子灌封结构应力原位分析及测试系统构建项目，2020-02至2021-06，主持

代表性学术
成果
发表论文（第一作者/通讯作者）

[1] Li X, Wang J, Li S, Ding A*. Cure-induced temperature gradient in laminated composite plate: Numerical simulation and experimental measurement. Composite Structures. 253(2020) 112822（汤森路透JCR 1区, 中科院JCR 1区）
[2] Ding A, Wang J*, Li X*. Understanding process-induced spring-in of L-shaped composite parts using analytical solution. Composite Structures. 250 (2020) 112629（汤森路透JCR 1区, 中科院JCR 1区）
[3] Chen J, Wang J, Li X, Sun L, Li S, Ding A*. Monitoring of temperature and cure-induced strain gradient in laminated composite plate with FBG sensors. Composite Structures. 2020;242:112168 （汤森路透JCR 1区, 中科院JCR 1区）
[4] Chen J, Wang J, Ding A*, Ni A*. Chen H. Flame retardancy and mechanical properties of glass fibre reinforced polyethylene composites filled with novel intumescent flame retardant. Composites Part B: Engineering. 2019;179:107555（汤森路透JCR 1区, 中科院JCR 1区）
[5] Ding A, Wang J, Ni A*, Li S*. Assessment on the ageing of sandwich composites with vinylester-based composite faces and PVC foam core in various harsh environments. Composite Structures. 2019;213:71-81 （汤森路透JCR 1区, 中科院JCR 1区）
[6] Ding A, Wang J, Ni A*, Li S*. A new analytical solution for cure-induced spring-in of L-shaped composite parts. Composites Science and Technology. 2019;171:1-12（汤森路透JCR 1区, 中科院JCR 1区）
[7] Ding A, Wang J*, Ni A, Li S*. Hygroscopic ageing of nonstandard size sandwich composites with vinylester-based composite faces and PVC foam core. Composite Structures. 2018;206:194-201（汤森路透JCR 1区, 中科院JCR 1区）
[8] Ding A, Wang J*, Ni A, Li S*. Ageing of sandwich composites with E-glass fibre/vinylester skins and PVC foam core in synergistic environmental agents. Composite Structures. 2018;202:253-60（汤森路透JCR 1区, 中科院JCR 1区）
[9] Ding A, Li S*, Wang J, Ni A*. A new analytical solution for spring-in of curved composite parts. Composites Science and Technology. 2017;142:30-40 （汤森路透JCR 1区, 中科院JCR 1区）
[10] Ding A, Li S*, Wang J, Ni A*, Zu L. A new path-dependent constitutive model predicting cure-induced distortions in composite structures. Composites Part A: Applied Science and Manufacturing. 2017;95:183-86 （汤森路透JCR 1区, 中科院JCR 1区）
[11] Sun L, Wang J, Ni A*, Li S, Ding A*, Modelling and experiment of process-induced distortions in unsymmetrical laminate plates, Composite Structures. 2017;182:524-32 （汤森路透JCR 1区, 中科院JCR 1区）
[12] Ding A, Li S*, Sun J, Wang J*, Lei Z. A comparison of process-induced residual stresses and distortions in composite structures with different constitutive laws. Journal of Reinforced Plastics and Composites. 2016;35:807-23 （汤森路透JCR 3区, 中科院JCR 4区）
[13] Ding A, Li S*, Sun J, Wang J*, Lei Z. A thermo-viscoelastic model of process-induced residual stresses in composite structures with considering thermal dependence. Composite Structures. 2016;136:34-43（汤森路透JCR 1区, 中科院JCR 1区）
[14] Ding A, Li S*, Wang J, Ni A*, Sun J, Chang L. Prediction of process-induced distortions in L-shaped composite profiles using path-dependent constitutive law. Applied Composite Materials. 2016,23(5):1027-45 （汤森路透JCR 3区, 中科院JCR 4区）
[15] Ding A, Li S*, Wang J, Zu L*. A three-dimensional thermo-viscoelastic analysis of process-induced residual stress in composite laminates. Composite Structures. 2015;129:60-9. （汤森路透JCR 1区, 中科院JCR 1区）
[16] Ding A, Li S, Zu L, Wang J*. High temperature behaviour of glass-vinyl ester stack liner. Plastics, Rubber and Composites. 2015;44:423-34 （汤森路透JCR 3区, 中科院JCR 4区）
[17] 丁安心, 王继辉*, 倪爱清, 孙亮亮, 李书欣*. 热固性树脂基复合材料固化变形解析预测研究进展. 复合材料学报. 2018(6):1361-76. （综述）
[18] 丁安心, 李书欣*, 倪爱清, 王继辉*. 热固性树脂基复合材料固化变形和残余应力数值模拟研究综述. 复合材料学报. 2017(3):471-85. （综述）
[19] 丁安心, 王继辉, 倪爱清*. 燃煤电厂用FRP烟囱安全系数的选择. 复合材料学报. 2013(s1):236-9.

专著

[1] 丁安心，热固性树脂基复合材料固化变形和应力（撰写中）

专利

[1] 王继辉，丁安心，倪爱清. 一种采用玻璃钢烟囱内筒排放低温、高湿烟气的烟囱，发明专利，专利号:X
[2] 王继辉，丁安心，冀运东，倪爱清，一种排放低温、高湿烟气的矩形玻璃钢烟道,发明专利，（审查中）.

国家标准

[1] 王继辉, 丁安心, 倪爱清, 冀运东, 刘志刚. 燃煤电厂用玻璃纤维增强塑料烟道. GB/T 30812-2015
[2] 王继辉, 丁安心, 倪爱清, 冀运东, 张凌伟, 张大厚. 燃煤电厂用玻璃纤维增强塑料烟囱内筒 GB/T 30811-2015


Prof. Anxin Ding
Address:School of Materials Science and Engineering and State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, 122 Luoshi Road,Wuhan University of Technology, Wuhan, China
Email：axding@whut.edu.cnTel: +86 **






EDUCATION
2013~2017
Ph.D. in Materials Science and Engineering
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,
Wuhan University of Technology, CHINA

2010~2013
M.Sc. in Material Processing Engineering
School of Materials Science and Engineering, Wuhan University of Technology, CHINA

2006~2010
B.S. in Theoretical and Applied Mechanics
School of Mechanical and Electrical Engineering, Wuhan institute of Technology, CHINA

WORK EXPERIENCE
2017~2019
Post doctor
Chair of Carbon composites, Technical University of Munich, Germany

SELECTED PUBLICATION
[1] Ding A, Wang J, Ni A*,Li S*. Assessment on the ageing of sandwich composites with vinylester-based composite faces and PVC foam core in various harsh environments. Composite Structures. 2019;213:71-81
[2] Ding A, Wang J, Ni A*,Li S*. A new analytical solution for cure-induced spring-in of L-shaped composite parts. Composites Science and Technology. 2019;171:1-12
[3] Ding A, Wang J*, Ni A,Li S*. Hygroscopic ageing of nonstandard size sandwich composites with vinylester-based composite faces and PVC foam core. Composite Structures. 2018;206:194-201
[4] Ding A, Wang J*, Ni A,Li S*. Ageing of sandwich composites with E-glass fibre/vinylester skins and PVC foam core in synergistic environmental agents. Composite Structures. 2018;202:253-60
[5] Ding A, Li S*, Wang J, Ni A*. A new analytical solution for spring-in of curved composite parts.Composites Science and Technology. 2017;142:30-40.
PATENT
[1] Wang J,Ding A，Ni A. Chimney adopting glass fiber reinforced plastic chimney inner barrel to discharge low-temperate high-humidity smoke, Chinese Invention Patent, Granted, CNB.
[2] Wang J,Ding A，Yun D, Ni A，Rectangular smoke duct for discharging low-temperature high-humidity smoke, Chinese Invention Patent, Under Review,CN A.
INTERNATIONAL CONFERENCE
[1] “Research on the structural analysis of wet FRP chimney” 19th annual academic conference on FRP/CM, Qingdao, Shandong, Nov. 14-16, 2012
[2] “Analysis of FRP chimney under wind and seismic load”The 1st China International Congress on Composite Materials (CCCM-1), Beijing, Sep. 10-12, 2013

附件下载: