罗国强
更新日期：2014-04-11

罗国强：副研究员，男，1980年10月出生，中共党员，研究方向为先进复合材料以及功能梯度复合材料的设计、制备技术、结构控制、性能及应用研究。参与了“十五”和“十五”军品配套重点项目和年度项目和国家自然基金项目，以及湖北省创新群体项目、湖北省科技攻关项目、湖北省自然科学基金等科研项目的立项、研究与结题验收等工作。发表论文60余篇，申请发明专利15余项。取得的研究成果和贡献得到了国家省部级的认可，获2009年度湖北省科技进步奖二等奖1项（排名第四），2011年度中国航空学会科学技术奖三等奖（排名第四），2011年度国家技术发明二等奖（排名第六）,2013年湖北省技术发明奖一等奖1项(排名第三)。

【大学开始受教育经历】

1997年9月-2001年7月，武汉理工大学（原武汉工业大学），材料科学与工程专业，本科/大学徐庆教授/周静教授；

2001年9月-2004年7月，武汉理工大学，材料学，研究生/硕士指导导师为张联盟教授/沈强教授；

2004年9月-2007年6月武汉理工大学，材料加工工程，研究生/博士，指导导师为张联盟教授/张东明教授；

【研究工作经历】

2007年9月-2010年3月中国工程物理研究院流体物理研究所，冲击波物理与爆轰物理国防科技重点实验室，凝聚态物理博士后，导师为吴强研究员和谭华研究员。

2010年9月至今，武汉理工大学，材料复合新技术国家重点实验室，讲师、副研究员。

【学术奖励】

l张联盟，沈强，杨中民，叶菁，王传彬，罗国强：连续梯度材料的共沉降可控制备新技术及其在动高压领域的应用（2011-F-214-2-01-R06），国家技术发明奖二等奖，2011年

l张联盟，沈强，张东明，罗国强，姜从盛，王传彬，李明忠，李凌，秦麟卿，陈洪波，雷蕾，李俊国：高性能二氧化锡陶瓷电极材料的研制及其应用(2009J-208-2-072-015-R04)，湖北省科技进步奖二等奖，2009年

l熊华平，沈强，王传彬，罗国强，陈波，毛唯，李俊国，程耀永：梯度材料的复合物系设计、粉末冶金与焊接制备及其结构控制，中国航空学会科学技术奖三等奖，2011年

l张联盟、沈强、罗国强、王传彬、黄志雄、张清杰宽组分、多物系梯度材料的薄带流延集成制备技术与典型工程应用, 湖北省技术发明奖一等奖，2013年
联系方式:

传真: +86-**

电话: **013

Email: luogq@whut.edu.cn; luoguoqiang1980@sina.com

Research Interests:

Novel composite materials including functionally graded materials(FGMs),Metal matrix composites(MMCs) and Ceramic reinforced composites(CRC)

Advanced processing technologies for novel composite, such as diffusion bonding (DB), tape-casting, spark plasma sintering (SPS), plasma activated sintering (PAS) and MA-HP
Research Projects:

The National Natural Science Foundation of China (NSFC): Theoretical and experimental research on complex-loading property of density gradient flyer-plate materials, No. **, 2011.01-2013.12, Person in Charge

The National Natural Science Foundation of China (NSFC): Research on design and preparation of functionally gradient flyer-plate materials using complex-loading technology, No. **, 2013.01-2015.12, Person in Charge

The Fundamental Research Funds for the Central Universities: Design and control of microstructure and performance enhancement of advanced thermal management composite materials, No.WUT:2013-II-024, 2013.01-2015.12, Person in Charge

The Fundamental Research Funds for the Central Universities: Enhanced properties of advanced thermal management composites with designable and controllable microstructure, No. WUT: 2013-II-024, 2013.06-2015.05, Person in Charge

The Hubei Province Natural Science Foundation of China: Low temperature sintering and Structure adjustment of high performance W-Cu electronic packaging materials, No. 2011CDB245, 2011.1-2012.12, Person in Charge

The Fundamental Research Funds for the Central Universities: Design, Fabrication and Performance of W-Cu functionally graded impactor, No. 2011-IV-038, 2011.1-2012.12, Person in Charge

The Hubei Province Natural Science Foundation of China: Research on technology and preparation of high-performance green tin oxide ceramic electrode materials, No. 2008CDA001, 2008.01-2010.12, Participation

The National Natural Science Foundation of China (NSFC): Research on equation of state generating quasi-isentropic compression via typical metallic materials, No. **, 2006.01-2008.12, Participation
Awards and Honors(One National Award, Three Provincial Awards):

2013, Hubei Provincial Award for Technological Invention 1st Prize, granted by the People’s Government of Hubei Province

2011, National Award for Technological Invention 2nd Prize, granted by the State Council of the People's Republic of China

2011, China Aviation Institute Award for Science and Technology 3rd Prize，granted by the China Aviation Institute

2009, Hubei Provincial Award for Science and Technology Progress 2nd Prize, granted by the People’s Government of Hubei Province
Publications (In recent 5 years, published academic papers: 62, including SCI : 26, Chinese Patent: 16)

[1] S.L.Liu, K.Yu, Q.Shen, M.J.Li, W.S.Chen, G.Q.Luo, L.M.Zhang: Fabrication of W@Cu composite powders by direct electroless plating using a dripping method. Journal of Wuhan University of Technology-Materials Science Edition, 2013, 28(4): 829-833

[2] P.A.Chen, G.Q.Luo*, Q.Shen, M.J.Li, L.M.Zhang: Thermal and electrical properties of W-Cu composite produced by activated sintering. Materials & Design, 2013, 46: 101-105(Corresponding author)

[3] G.Q.Luo, X.J.Jiang, M.J.Li, Q.Shen, L.M.Zhang, H.G.Yu: Facile Fabrication and Enhanced Photocatalytic Performance of Ag/AgCl/rGO Heterostructure Photocatalyst. Acs Applied Materials & Interfacse, 2013, 5(6): 2161-2168

[4] G.Q.Luo, J.Zhang, M.J.Li, Q.Q.Wei, Q.Shen, L.M.Zhang: Interfacial Microstructure and Mechanical Strength of 93W/Ta Diffusion-Bonded Joints with Ni Interlayer. Metallurgical and materials transactions A-Physical Metallurgy and Materials Science, 2013, 44A(2): 602-605

[5] Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 559: 868-874

[6] P.A.Chen, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: The mechanical properties of W-Cu composite by activated sintering. International Journal of Refractory Metals & Hard Materials, 2013, 36: 220-224

[7] Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg-Al joints. Journal of Alloys and Compounds, 2012,541: 458-461

[8] C.Chen, J.G.Li, G.Q.Luo*, Y.L.Xiong, Q.Shen, L.M.Zhang: Size-controlled in situ synthesis and photo-responsive properties of silver/poly(methyl methacrylate) nanocomposite films with high silver content. Applied Surface Science, 2012, 258(24): 10180-10184

[9] J.Zhang, G.Q.Luo, Y.Y.Wang, Q.Shen, L.M.Zhang: An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer. Materials Letters, 2012, 83: 189-191

[10] J.Zhang, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer. Materials & Design, 2012, 39: 81-86

[11] Y.L.Xiong, Q.Shen, F.Chen, G.Q.Luo, K.Yu, L.M.Zhang: High strength retention and dimensional stability of silicone/alumina composite panel under fire. Fire and Materials, 2012, 36(4): 254-263

[12] Y.L.Xiong, G.Q.Luo, C.Chen, H.Yuan, Q.Shen, M.J.Li: In situ synthesis of zero-valent silver nanoparticles in polymethylmethacrylate under high temperature. Applied Surface Science, 2012, 258(15): 5822-5826

[13] P.A.Chen, G.Q.Luo*, M.J.Li, Q.Shen, L.M.Zhang: Effects of Zn additions on the solid-state sintering of W-Cu composites. Materials & Design, 2012, 36: 108-112

[14] J.Zhang, Y.Xiao, G.Q.Luo, Q.Shen, L.M.Zhang: Effect of Ni interlayer on strength and microstructure of diffusion-bonded Mo/Cu joints. Materials Letters, 2012, 66(1): 113-116

[15] J.Zhang, G.Q.Luo*, M.J.Li, Y.Y.Wang, Q.Shen, L.M.Zhang: Structure and Diffusion Mechanism of MB2/LY12 Joint by Welding. Chinese Journal ofMaterials Research, 2012, (02): 138-142 (in china)

[16] J.Li, G.Q.Luo, Q.Shen, L.M.Zhang, H.X.Zhu, C.J.Deng: Preparation of Mg-Cu density graded materials by tape casting. Acta Materiae Compositae Sinica, 2012, (02): 93-97 (in china)

[17] G.Q.Luo, K.Yu, Y.Y.Wang: Diffusion bonding of magnesium alloy and aluminum alloy using copper film as interlayer. Journal of Wuhan Institute of Technology, 2012, (08): 62-66 (in china)

[18] J.Li, G.Q.Luo, Q.Shen, L.M.Zhang, H.X.Zhu, C.J.Deng: Preparation of Non-Aqueous Mg Green Tapes by Tape Casting. Synthesis and Reactivity In Inorganic. Metal-organic and Nano-metal Chemistry, 2012, 42(5): 758-763

[19] J.Zhang, G.Q.Luo, M.J.Li, Y.Y.Wang, Q.Shen, L.M.Zhang: Microstructure in interface zone of diffusion welded joint of Mo and Cu. MaterialsScienceandTechnology, 2012, (04): 61-64 (in china)

[20] Y.L.Xiong, Q.Shen, H.Yuan, F.Chen, G.Q.Luo: Foaming of CNTs/PMMA Nanocomposite with Supercritical Carbon Dioxide. 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011)/8th Materials Science School for Young Scientists (KINKEN-WAKATE2011), 2012, 2011/12/1-2011/12/2: 61-64

[21] S.L.Liu, Q.Shen, G.Q.Luo, M.J.Li, L.M.Zhang: Calculation of Tape Thickness for Ceramic Tape Casting. 7th China International Conference on High-Performance Ceramics (CICC 7), 2012, 2011/11/4-2011/11/7: 328-333

[22] J.Zhang, G.Q.Luo, M.J.Li, Q.Shen, L.M.Zhang: Study on microstructure and property of diffusion-bonded Mo-Cu joints. 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011)/8th Materials Science School for Young Scientists (KINKEN-WAKATE2011), 2012, 2011/12/1-2011/12/2: 178-182

[23] J.S.Bai, M.Tang, G.Q.Luo, J.D.Yu, S.Yuan, C.D.Dai, Q.Wu, H.Tan: Computational design and simulation of the Mg-Cu system graded density impactors for complex loading experiments. Science China: Physics, Mechanics and Astronomy, 2011, 54(9): 1710-1716

[24] M.J.Li, Q.Shen, G.Q.Luo, L.M.Zhang: Effects of Li(2)O on Densification Microstructure and Thermal Property of Spark Plasma Sintered AlN Ceramics. Wuji Cailiao Xuebao/journal of Inorganic Materials, 2011, 26(6): 659-663

[25] Z.Q.Li, D.M.Zhang, G.Q.Luo, C.Z.Li, Q.Shen, L.M.Zhang: Spark Plasma Sintering of Undoped SnO2 Ceramics. Journal Wuhan University of Technology Materials Science Edition, 2011, 26(2): 315-318

[26] G.Q.Luo, Q.Shen, Q.Z.Li, D.M.Zhang, C.B.Wang, L.M.Zhang: Corrosion Behavior of SnO(2)-based Electrode Ceramics in Soda-lime Glass Liquid. 3rd International Congress on Ceramics (ICC3), 2011, 2010/11/14-2010/11/18

[27] Q.Z.Li, D.M.Zhang, G.Q.Luo, C.Z.Li, Q.Shen, L.M.Zhang: The Effect of Sb Content on Spark Plasma Sintered High-Density Antimony-Doped Tin Oxide Ceramics. 11th International Conference in Asia of the International-Union-of-Materials-Research- Societies, 2011, 2010/9/25-2010/9/28: 204-20

[28] X.G.Zhang, G.Q.Luo, Y.L.Xiong, M.J.Li, Q.Shen, L.M.Zhang: In situ preparation and property of nano-Ag/PMMA composite film. JournalofFunctionalMaterials, 2011, (05): 799-802 (in china)

[29] J.S.Bo, G.Q.Luo, J.F.Huang, P.Li: Numerical Simulation of the Gas Gun Experiment with Pillow Impactor Loading. ChineseJournalofHighPressurePhysics, 2011, (05): 390-394 (in china)

[30] J.T.Xin, F.Tan, G.Q.Luo, X.J.Ma, Z.Q.Zhao, D.Han: Ablation morphology of germanium with multi-pulse femtosecond laser. High Power Laser and Particle Beams, 2011, (07): 1753-1757 (in china)

[31] J.S.Bo, G.Q.Luo, X.Wang, M.Tang, C.D.Dai, H.Tan: Calculation and Analyais of The Mg-W Gdi Complex loading Experiment. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(06): 1068-1073 (in china)

[32] J.S.Bo, Q.Shen, M.Tang, G.Q.Luo: Numerical analysis on complex loadings and shockless compressions of the W-Mo-Ti-Mg graded impedance impactor. Journal of Vibration and Shock, 2010, (06): 72-75 (in china)

[33] J.Li, G.Q.Luo, Q.Shen, L.M.Zhang: Preparation and Characterization of Different Composition Mg-Cu Tapes. 6th China International Conference on High-Performance Ceramics (CICC-6), 2010, 2009/8/16-2009/8/19: 518-521

[34] L.M.Zhang, M.Gao, G.Q.Luo, Z.Chen, Q.Shen: Preparation of Tungsten-epoxy Composites and FGMs with Density Gradient. 10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, 2010, 2008/9/22-2008/9/25: 461-464

[35] G.Q.Luo, Q.Shen, Q.Z.Li, J.Li, D.M.Zhang, L.M.Zhang: Preparation and Electrical-Conductive Property of SnO(2)-Based Ceramics. 6th China International Conference on High-Performance Ceramics (CICC-6), 2010, 2009/8/16-2009/8/19: 367-370

[36] X.P.Su, G.Q.Luo, Q.Shen, H.Zeng, C.B.Wang, L.M.Zhang: Study on Diffusion Welding of TC4/OFC in Vacuum, Rare Metal Materials and Engineering, 2010, 39(11): 2044-2047(in China)

[37] G.Q.Luo, J.S.Bai, H.Tan, Q.Shen, J.B.Hu, Q.S.Wang, C.D.Dai, Q.Wu, L.M.Zhang: Characterizations of Mg-W System Graded-Density Impactors for Complex Loading Experiments. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2010, 41A(9): 2389-2395

[38] J.S.Bo, G.Q.Luo, M.Tang, J.B.Hu, C.D.Dai, Y.Ma, H.Tan, Q.Wu: Computational Design of Graded Density Impactors for Shock Loading and Quasi-Isentropic Compression. Chinese Journal of High Pressure Physics, 2009, (03): 173-180 (in china)

[39] H.Zeng, G.Q.Luo, Q.Shen, C.B.Wang, L.M.Zhang: Preparation of TC4-LY12 Joint by Vacuum Diffusion Welding. 1st International Conference on Sustainable Construction and Risk Management, 2009, 2010/6/12-2010/6/14: 242-245

[40] J.Li, G.Q.Luo, Q.Shen, L.M.Zhang: Preparation of Mg-Cu Composite by Tape Casting and Hot-pressing. 1st International Conference on Sustainable Construction and Risk Management, 2009, 2010/6/12-2010/6/14: 262-265

[41] Q.Q.Wei, G.Q.Luo, Q.Shen, L.M.Zhang: Fabrication of Mg-W System FGM with Density Gradient by Hot-press Sintering, 1st International Conference on Sustainable Construction and Risk Management, 2009, 2010/6/12-2010/6/14: 246-249

[42] J.Zhou, Q.Shen, G.Q.Luo, L.M.Zhang: Fabrication and Mechanical Property of Mg-W Composites by Spark Plasma Sintering. Journal of Wuhan University of Technology, 2008, (04): 05-08 (in china)

[43] G.Q.Luo, J.Li, Q.Shen, D.M.Zhang, L.M.Zhang: Corrosion behaviour of tin dioxide based electrode material at high temperature in molten soda-lime-silicate glass. Corrosion Science, 2008, 50(2): 591-595

[44] L.Lei, J.Li, G.Q.Luo, D.M.Zhang, Q.Shen, L.M.Zhang: Preparation and Electrical Properties of Tin Dioxide Ceramics Oped With Zinc Oxide and Diantimony Trioxide. JournalofTheChineseCeramicSociety, 2008, (S1): 43-48 (in china)

[45] J.S.Bo, Q.Shen, M.Tang, J.B.Hu, G.Q.Luo, H.Tan, L.M.Zhang: A Numerical Analysis of the Influence of Buffer Material on Tantalum Flier Plate Velocity in the Hypervelocity Launcher. Chinese Journal of High Pressure Physics, 2008, (01): 19-24 (in china)

[46] Q.Shen, Y.H.Liu, J.Zhou, G.Q.Luo, L.M.Zhang: 2Preparation of Mg-W graded materials by spark plasma sintering. 5th China International Conference on High-Performance Ceramics (CICC-5), 2008, 2007/5/10-2007/5/13: 1869-1871

[47]张联盟；王仪宇；罗国强；沈强；李美娟；王传彬, 2012, 镁合金与铝合金表面改性处理及高强连接的方法, CN**6.5

[48] 张联盟；王仪宇；罗国强；沈强；李美娟；王传彬, 2011, 镁合金与铝合金夹层扩散焊接的方法, CN**5.9

[49] 沈强；熊远禄；罗国强；袁欢；李美娟；张联盟, 2011, 聚甲基丙烯酸甲酯泡孔梯度材料的制备方法, CN**2.3

[50] 沈强；张建；罗国强；李美娟；张联盟, 2011, 钼合金与铜合金的低温扩散焊接方法, CN**4.

[51] 沈强；熊远禄；罗国强；张晓光；陈程；李美娟；张联盟, 2011, Ag/PMMA纳米复合材料的制备方法, CN**5.3

[52] 沈强；罗国强；张联盟；王传彬；李美娟；魏琴琴；张建, 2010, 钨合金与钽合金的低温扩散焊接方法, CN**7.9

[53] 沈强；陈平安；罗国强；张联盟；王传彬；李美娟；刘书萍, 2010, 致密W-Cu复合材料的低温制备方法, CN**1.8, 2010

[54] 张联盟；池晨；罗国强；沈强；李美娟；刘树龙；王传彬, 2010, 一种稳定的高固相含量W-Cu金属流延料浆的制备方法, CN**9.7

[55] 沈强；张建；罗国强；李美娟；张联盟, 2010, 镁合金与铝合金的低温扩散焊接方法, CN**6.3

[56] 罗国强；李君；张联盟；沈强；李美娟；王传彬, 2010, 一种流延法制备Mg-Cu体系密度梯度材料的方法, CN**9.1

[ 57] 张联盟；李君；张建；罗国强；沈强；王传彬, 2009, 金属粉非水基流延料浆及其制备方法, CN**7.4

[58] 张联盟；高明；陈卓；罗国强；沈强；王传彬；黄志雄, 2009, 一种微球复合泡沫材料的制备方法, CN**3.4

[59] 张联盟；罗国强；张东明；沈强；王传彬；李俊国, 2008, 二氧化锡电极陶瓷材料的制备方法, CN**8.9

[60] 张联盟；罗国强；沈强；张东明；李俊国；王传彬, 2008, 一种高致密二氧化锡陶瓷的制备方法, CN**9.3

[61] 张联盟；陈刚；章嵩；王传彬；沈强；罗国强, 2008, 一种制备碳化硼陶瓷的方法, CN**7.2

[62] 张联盟；王传彬；沈强；罗国强；曾浩, 2008, 一种利用铌中间层扩散焊接钛合金与铜合金的方法, CN**2.1