一、姓名：冯玮

　　二、基本情况：

　　1、出生年月：1973.02

　　2、学位：博士

　　3、职称：副教授

　　4、工作院系：材料学院材料成型与加工系

　　三、教育经历（从大学开始）：

　　1992年－1996年，原武汉汽车工业大学材料科学与工程学院塑性成型工艺与装备专业，获工学学士学位

　　1999年－2003年，武汉理工大学，材料科学与工程学院材料加工工程专业，获工学硕士学位

　　2006年－2011年，武汉理工大学材料科学与工程学院材料加工工程专业，获博士学位

　　四、工作经历：

　　1996年－2002年， 武汉理工大学，材料科学与工程学院，助教

　　2002年－2012年， 武汉理工大学，材料科学与工程学院，讲师

　　2012年—至今， 武汉理工大学，材料科学与工程学院，副教授

　　五、研究领域（不多于3个）：

　　1.精密成形工艺与数值模拟技术

　　2.模具CAD/CAE/CAM与优化设计

　　3.高分子材料成型工艺与模具设计

　　六、科研项目（不多于5项）：

　　1. 螺旋圆柱齿轮温精密成形机理与技术基础研究 国家自然科学基金面上项目

　　2. 斜齿圆柱齿轮旋转精冲成形机理及工艺方法研 国家自然科学基金面上项目

　　3.精密锻轧成套新技术国家重大科技专项

　　七、代表性论文及著作（不多于10项）：

　　1. FENG Wei, Fu Youheng. High temperature deformation behavior and constitutive modeling for 20CrMnTiH steel.Materials and Design 2014, 57: 465-471

　　2. FENG Wei (冯玮)，HUA Lin(华林), HAN Xing-hui(韩星会). Finite element analysis and simulation for cold precision forging of a helical gear，Journal of Central South University of Technology，19(12)，3369-3377，2012

　　3. Wei Feng , Lin Hua. Multi-objective optimisation of process parameters for the helical gear precision forging by using Taguchi method, Journal of Mechanical science and Technology, 2011, 25(6): 1519-1527

　　4. Wei Feng, Yunfeng Mei, Kang Yan, Tian Zou, Xinlei Zhang.Billet design optimization of helical gears precision forging based on response surface method and FEM simulation.Advanced Materials Research, 2011, 189-193: 4168-4172

　　5. Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Prediction of forming load for the helical gear precision forging by BP neural network，Advanced Materials Research, 2013, 823:170-174

　　6.冯玮，徐富家. 20CrMnTiH钢热压缩微观组织演变及动态再结晶模型.塑性工程学报，2014, 21(3):78-84

　　7 冯 玮，曹继昌，吴舒婷，李扬帆.应用 BP 神经网络预测精锻斜齿轮损伤因子. 武汉理工大学学报，2014, 36(3):328-331

　　8. 冯玮.圆柱螺旋齿轮温精密成形的三维热力耦合温度场有限元分析. 热加工工艺，2012, 41(15):93-95, 98.

　　9. 冯玮.圆柱螺旋齿轮冷精锻成形的三维刚塑性有限元模拟. 热加工工艺, 2010, 39(11):91-93, 96.

　　10. 模具CAD/CAM基础(国家十一五规划教材)．武汉：武汉理工大学出版社，2009

　　八、联系方式：

　　1、Tel：**

　　2、E-mail：fengwei@whut.edu.cn

　　3、工作地址（实验室）：材料学院大楼408室

　　

　　1.Name: Feng Wei

　　2.Brief introduction:

　　1)Date of birth: 02/1973

　　2)Degree: Ph.D

　　3)Title: Associate Professor

　　4)Working department: Manufacturing and Processing of Material，School of Material science and Engineering,

　　3.Education experience(after entering university):

　　2008.3- 2011.6 Doctor of Material Processing Engineering,

　　School of Material Science and Engineering,

　　Wuhan University of Technology

　　1999.9- 2003.6 Master of Material Processing Engineering,

　　School of Material science and Engineering,

　　Wuhan University of Technology

　　1992.9-1996.7 Bachelor of Material Processing and Control Engineering, School of Materials Science and Engineering, Wuhan University of Technology

　　4.Working experience:

　　2012.9- present Associate Professor of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology

　　2012.8- 2002.9 Lecturer of Material Processing Engineering,

　　School of Material Science and Engineering,

　　Wuhan University of Technology

　　1996.7-2002.8 Assistant of Material Processing Engineering,

　　School of Material Science and Engineering,

　　Wuhan University of Technology

　　5.Research field(no more than 3):

　　1) Precision forming technology and numerical simulation

　　2) Mold&Die CAD&CAM&CAE Technology

　　3) Plastic Injection Molding

　　6.Research project(no more than 5):

　　1) State science and technology support program: Research on Deformation Mechanism and Technology in Warm Precision Forging Helical Gear

　　2) State science and technology support program： Research on forming mechanism and process design method of rotating fine-blanking technology for helical gear

　　3) The Major State science and technology support program：The Whole New Technology of Precision Forging

　　7.Representative papers and works(no more than 10):

　　[1] Feng Wei, Fu Youheng. High temperature deformation behavior and constitutive modeling for 20CrMnTiH steel.Materials and Design 2014, 57: 465-471

　　[2] Feng Wei，HUA Lin, HAN Xing-hui. Finite element analysis and simulation for cold precision forging of a helical gear，Journal of Central South University of Technology，19(12)，3369-3377，2012

　　[3] Feng Wei , Lin Hua. Multi-objective optimisation of process parameters for the helical gear precision forging by using Taguchi method, Journal of Mechanical science and Technology, 2011, 25(6): 1519-1527

　　[4] Feng Wei, Yunfeng Mei, Kang Yan, Tian Zou, Xinlei Zhang.Billet design optimization of helical gears precision forging based on response surface method and FEM simulation.Advanced Materials Research, 2011, 189-193: 4168-4172

　　[5] Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Prediction of forming load for the helical gear precision forging by BP neural network，Advanced Materials Research, 2013, 823:170-174

　　[6] Feng Wei, Xu fujia. Microstructure evolution and dynamic recrystallization model of 20CrMnTiH steel during hot compression. Journal of Plastic Engineering，2014, 21(3):78-84

　　[7] Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Application of BP Neural Network in Damage Factor Prediction for Precision Forging Helical Gears. Journal of WUT( Information & Management Engineering),2014, 36(3):328-331

　　[8] Feng Wei.Three Dimensional Coupled Thermo-Mechanical Finite Element Analysis on Temperature Field for Warm Precision Forming of Helical Gear. Hot Working Technology，2012, 41(15):93-95, 98.

　　[9] Feng Wei.3D Rigid Plastic Finite Element Simulation of Precision Cold Forging of Helical Gear. Hot Working Technology2010, 39(11):91-93, 96.

　　[10] Mold CAD/CAM Foundation (the 11th Five-Year Programmed Textbooks)．

　　Wuhan：Wuhan University of Technology Press，2009

　　8.Contact information:

　　1) Tel: **

　　2) E-mail: fengwei@whut.edu.cn

　　3) Location of lab: Room 408 in School of Material Science and Engineering office building
附件下载: