一、姓名：倪爱清
二、基本情况：

1、出生年月： 1975.11

2、学位：博士

3、职称：副研究员

4、工作院系：新材所

三、教育经历（从大学开始）：

1993.9~1997.6，武汉理工大学结构工程与力学系，学士

1997.9~2000.6，武汉理工大学结构工程与力学系，硕士

2000.8-2002.5，美国西凯斯大学，固体力学，硕士

2004.9-2007.6，武汉大学，固体力学，博士

四、工作经历：

2004.1~2004.9 中南建筑设计院一所，结构设计工程师，

2007.6~2008.4 华中农业大学工程技术学院，讲师

2008.4~至今 武汉理工大学新材所，副研究员

五、研究领域（不多于3个）：

复合材料设计及优化，复合材料的老化性能，可降解天然纤维复合材料

六、科研项目（不多于5项）：

可降解天然纤维复合材料试验研究

集水装置材料及结构性能试验研究

湿法脱硫用乙烯基树脂力学性能研究

排烟冷却塔玻璃钢烟道技术研究

巴斯夫造纸化学品公司结构计算校核、试验与检测

七、代表性论文及著作（不多于10项）：

[1]溶胶-凝胶法制备新型紫外光固化聚氨酯丙烯酸酯/环氧丙烯酸酯/纳米二氧化硅杂化材料的合成与表征（英文），J. Appl. Polym. Sci., 2012, Vol.127 (4): 2905-2909, SCI, EI

[2]环氧丙烯酸酯/介孔氧化硅复合材料的制备与表征（英文），Asian Journal of Chemistry, 2012, Vol.24(6), pp.2744-2746, SCI, EI

[3]基于 FBG 传感器的 CFRP 冲击损伤监测研究, 第17届全国复合材料学术会议论文, 819-823

[4]基于光纤 Bragg 光栅对复合材料冲击累计损伤的检测, 第17届全国复合材料学术会议论文, 811-814

[5]纳米SiO2/PUA-EA布拉格光栅传感器涂层耐热性能评估, 复合材料学报, 2013,Vol.30, Issue(6):135-138, EI

[6]溶胶-凝胶法制备紫外光固化聚氨酯丙烯酸酯/环氧丙烯酸酯/纳米二氧化硅杂化材料, 高分子材料科学与工程, 2013，Vol.4, EI

[7]E玻璃纤维/乙烯基酯复合材料的氙灯老化性能研究, 复合材料学报, 2013, S1:, EI

[8]风载与地震载荷下FRP烟囱内衬的分析（英文），Advanced Materials Research, 790: 193-197, EI

[9]燃煤电厂用烟囱安全系数的选择, 复合材料学报, 2013, vol.30, S1, EI

八、联系方式：

1、Tel：**

2、E-mail：aqni21stcn@163.com

3、工作地址（实验室）：武汉理工大学新材所402


1.Name: Ni Aiqing

2.Brief introduction:

1)Date of birth: Nov. 1975

2)Degree: Ph. D

3)Title: Associate Professor

4)Working department: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing

3.Education experience(after entering university):

(1)1993.9~1997.6，Department of Structural Engineering and Mechanics, Wuhan University of Technology(WHUT), Bachelor

(2)1997.9~2000.6，Department of Structural Engineering and Mechanics, WHUT, M.Sc.

(3)2000.8-2002.5，Case Western Reserve University，Solid Mechanics, M. E.

(4)2004.9-2007.6，Wuhan University，Solid Mechanics, Ph. D.

4.Working experience:

(1)2004.1~2004.9，China Central South ArchitectureDesignInstitute，structural design engineer

(2)2007.6~2008.4 Huazhong Agricultural University, School of Engineering Technology, Lecturer

(3)2008.4~nowWuhan University of Technology, Associate Professor

5.Research field(no more than 3):

(1)Composite design and optimization

(2)Research on composite ageing

(3)Biodegradable natural fiber reinforced composite

(4)Research project(no more than 5):

(1)Experimental research on biodegradable natural fiber composite materials;

(2)Experimental study on material and structural properties for water collector application;

(3)Study on the mechanical properties of vinyl ester resin for wet FGD;

(4)Research on exhaust cooling tower FRP flue duct

(5)Structural design, experiment and tests for BASF China

(5)Representative papers and works(no more than 10):

(1)Synthesis and characterization of novel ultraviolet‐curing polyurethane acrylate/epoxy acrylate/SiO2 hybrid materials via sol–gel reaction, J. Appl. Polym. Sci., 2012, Vol.127 (4)：2905-2909, SCI, EI

(2)Preparation and Characterization of Epoxy Acrylate/Mesoporous Silica Composite Materials, Asian Journal of Chemistry, 2012,Vol.24(6) pp.2744-2746, SCI, EI

(3)Research on the impact damage of CFRP based on FBG sensors, the 17th National conference on composite materials (Chinese), pp. 819-823

(4)Inspection of accumulated damages of composite under impact based on FBG, the 17th National conference on composite materials (Chinese), pp. 811-814

(5)The thermal properties of Nano SiO2/PUA-EA FBG sensor coating (Chinese), Journal of Composite Materials, 2013,Vol.30, Issue(6):135-138, EI

(6)The preparation of ultraviolet‐curing polyurethane acrylate/epoxy acrylate/SiO2 hybrid materials via sol–gel reaction(Chinese), Polymer Material Science and Engineering, 2013，Vol.4, EI

(7)The xenon ageing of E-glass fiber/vinyl ester composite (Chinese), Journal of Composite Materials, 2013, S1:, EI

(8)Analysis of FRP Chimneys Liners under Wind and Seismic Load, Advanced Materials Research, 790: 193-197, EI

(9)The study on the safety factor of chimney for thermal power plant application, (Chinese), Journal of Composite Materials, 2013, vol.30, S1, EI

8.Contact information:

1)Tel: (0086)**

2)E-mail: ani@whut.edu.cn; aqni21stcn@163.com

3)Location of lab: Room #402, State key laboratory of advanced technology for materials synthesis and processing, Wuhan University of Technology

附件下载: