一、姓名：张联盟
二、基本情况：
1、出生年月：1955年1月
2、学位：博士
3、职称：教授
4、工作院系：武汉理工大学材料学院
三、教育经历（从大学开始）：
1975.09-1978.07 武汉工业大学复合材料学士学位
1983.09-1986.06 武汉工业大学材料学硕士学位
1993.02-1996.12 日本东北大学材料学博士学位
四、工作经历：
1978.07-1983.06 武汉建筑材料工业学院新材料系助教
1986.07-1988.04 武汉工业大学硅酸盐工程系粉体实验室主任/讲师
1985.05-1995.09 武汉工业大学材料复合新技术国家重点实验室第一研究室主任/副教授
1995.09-1996.12 日本东北大学金属材料研究所平井敏雄研究室助手
1997.01-1997.03 武汉工业大学材料复合新技术国家重点实验室第二研究室主任/教授
1997.04-1998.02武汉工业大学材料科学与工程学院院长/教授
1998.03-2000.05 武汉工业大学校办，材料科学与工程学院校长助理兼院长/教授
1999.05-2000.01日本东北大学金属材料研究所文部省A类客座教授
2000.05-至今武汉理工大学副校长/教授
2010.02-至今特种功能材料技术教育部重点实验室兼任实验室主任/教授
五、研究领域（不多于3个）：
1、先进复合材料（复相陶瓷、功能梯度材料）
2、聚合物基复合材料
3、功能薄膜材料
六、科研项目（不多于5项）：
[1]高等学校学科创新引智计划，功能薄膜新材料的先进制备技术及工程应用学科创新引智基地、2013/01-2017/12、9000万元
[2]国家自然科学基金面上项目，**、用于惯性约束聚变靶丸材料的B-C-N薄膜的ECR-PLD制备及其结构控制、2013/01-2016/12、80万元
[3]国家国际科技合作项目，2009DFB50470、新型无铅二钛酸钡薄膜的结构控制与铁电性能、2009.01-2011.12、242万元
[4]国家军品配套研制项目，JPPT-115-4-1703、2009/06-2011/12、300万元
[5]国家自然科学基金面上项目，**、不同化学计量比B-C系列薄膜的脉冲激光沉积与成分控制、2008/01-2010/12、32万元
七、代表性论文及著作（不多于10项）：
[1]张联盟, 黄学辉, 宋晓岚: 《材料科学基础》, 2008, 武汉理工大学出版社
[2]张联盟, 程晓敏, 陈文:《材料学》, 2005, 高等教育出版社
[3]L.M.Zhang, W.S.Chen, G.Q.Luo, P.A.Chen, Q.Shen, C.B.Wang: Low-Temperature Densification and Excellent Thermal Properties of W-Cu Thermal-Management Composites Prepared from Copper-Coated Tungsten Powders. Journal of Alloys and Compounds, 2014, 588: 49-52
[4]J.Zhang, G.Q.Luo, Y.Y.Wang, Y.Xiao, Q.Shen, L.M.Zhang: Effect of Al thin film and Ni foil interlayer on diffusion bonded Mg-Al dissimilar joints. Journal of Alloys and Compounds, 2013, 556: 139-142
[5]Y.X.Zhao, F.Chen, Q.Shen, L.M.Zhang: Optimal design of light trapping in thin-film solar cells enhanced with graded SiNx and SiOxNy structure. Optics express, 2012, 20(10), 11121-11136
[6]Z.M.Yang, L.M.Zhang, Q.Shen, D.R.Gong: Theoretical design of sedimentation applied to the fabrication of functionally graded materials. Metallurgical and Materials Transactions B, 2003, 34: 605-609
[7]LM.Zhang, H.P.Xiong, L.D.Chen, T.Hirai: Microstructures of W-Mo functionally graded material. Journal of Materials Science Letters, 2000, 19: 955-958
[8]Q.Shen, L.M.Zhang, H.P.Xiong, J.S.Hua, H.Tan: Fabrication of W-Mo-Ti system flier-plate with graded impedance for generating quasi-isentropic compression. Chinese Science Bulletin, 2000, 45(15): 1421-1424
[9]L.M.Zhang, T.Hirai, A.Kumakawa, R.Z.Yuan: Cyclic thermal shock resistance of Ni3Al-TiC FGMs. Composites Part B: Engineering, 1997, 28(1), 21-27
[10]L.M.Zhang, R.Z.Yuan, M.Oomori, T.Hirai. Residual and working stresses of a TiC/Ni3Al FGM and its structure optimization. Journal of materials science letters, 1995, 14(22): 1620-1623
八、联系方式：
1、Tel：**
2、E-mail：lmzhang@whut.edu.cn
3、工作地址（实验室）：武汉理工大学逸夫楼4楼
1.Name: Lianmeng Zhang
2.Brief introduction:
1)Date of birth: 1955-01
2)Degree: Ph.D
3)Title: Professor
4)Working department: Materials Science and Engineering, Wuhna University of Technology
3.Education experience(after entering university):
Doctor of Engineering (Materials Science)
Tohoku University, Japan (December, 1995)
Master of Engineering (Materials Science and Engineering)
Wuhan University of Technology (July, 1986)
Bachelor of Engineering (Composites Materials Science and Engineering)
Wuhan University of Technology (July, 1978)
4.Working experience:
05/2000~presentVice President in Wuhan University of Technology
04/1997~04/2000 Dean of College of Materials Science and Engineering, Wuhan University of Technology
05/1999~01/2000 Guest professor in Tohoku University, Japan
09/1995~presentProfessor in Wuhan University of Technology
04/1987~04/1988 Guest researcher, Kanagawa University and Tokyo University
09/1978~08/1995 Assistant, lecture, associate professor in Wuhan University of Technology
5.Research field(no more than 3):
1. Advanced Composite Materials (Composite Ceramics, Functionally Graded Materails)
2. Polymer Based Composite Materials
3. Functional Thin Films
6.Research project(no more than 5):
[1]Disipline Innovation and Introducing Talents Project for Universities, Introducing Talents Base of Advanced Processing Technology and Engineering Application of Funtional Thin Films, 2013/01-2017/12.
[2]National Natural Science Foundation, **, Preparation and Structural Control of B-C-N Thin Films for Inertial Confinement Fusion Targets by ECR-PLD, 2013/01-2016/12.
[3]International Technology Collaboration Project, 2009DFB50470, Structual Control and Ferroelectric Properties of Novel Lead-Free BaTi2O5 Thin Films, 2009.01-2011.12.
[4]JPPT Project, JPPT-115-4-1703, 2009/06-2011/12.
[5]National Natural Science Foundation, **, Pulsed Laser Deposition and Compostion Control of B-C Thin Films with Different Chemical Compositions, 2008/01-2010/12.
7.Representative papers and works(no more than 10):
[1]L. M. Zhang, X. H. Huang, X. L. Song.
[2]L. M. Zhang, X. M. Cheng, W. Chen,
[3]L.M.Zhang, W.S.Chen, G.Q.Luo, P.A.Chen, Q.Shen, C.B.Wang: Low-Temperature Densification and Excellent Thermal Properties of W-Cu Thermal-Management Composites Prepared from Copper-Coated Tungsten Powders. Journal of Alloys and Compounds, 2014, 588: 49-52
[4]J.Zhang, G.Q.Luo, Y.Y.Wang, Y.Xiao, Q.Shen, L.M.Zhang: Effect of Al thin film and Ni foil interlayer on diffusion bonded Mg-Al dissimilar joints. Journal of Alloys and Compounds, 2013, 556: 139-142
[5]Y.X.Zhao, F.Chen, Q.Shen, L.M.Zhang: Optimal design of light trapping in thin-film solar cells enhanced with graded SiNx and SiOxNy structure. Optics express, 2012, 20(10), 11121-11136
[6]Z.M.Yang, L.M.Zhang, Q.Shen, D.R.Gong: Theoretical design of sedimentation applied to the fabrication of functionally graded materials. Metallurgical and Materials Transactions B, 2003, 34: 605-609
[7]LM.Zhang, H.P.Xiong, L.D.Chen, T.Hirai: Microstructures of W-Mo functionally graded material. Journal of Materials Science Letters, 2000, 19: 955-958
[8]Q.Shen, L.M.Zhang, H.P.Xiong, J.S.Hua, H.Tan: Fabrication of W-Mo-Ti system flier-plate with graded impedance for generating quasi-isentropic compression. Chinese Science Bulletin, 2000, 45(15): 1421-1424
[9]L.M.Zhang, T.Hirai, A.Kumakawa, R.Z.Yuan: Cyclic thermal shock resistance of Ni3Al-TiC FGMs. Composites Part B: Engineering, 1997, 28(1), 21-27
[10]L.M.Zhang, R.Z.Yuan, M.Oomori, T.Hirai. Residual and working stresses of a TiC/Ni3Al FGM and its structure optimization. Journal of materials science letters, 1995, 14(22): 1620-1623
8.Contact information:
1) Tel: **
2) E-mail: lmzhang@whut.edu.cn
3) Location of lab: 4th Floor, Yifu Buiding, Wuhan University of Technology
附件下载:
