姓名：苏钊性别： 男 出生年月： 职称: 高级研究员 学科专业： 水泥和混凝土
工作单位：ESHA集团公司
办公电话： 0031-(0)** 联系电话： 0031-(0)** (h)
毕业院校: (Materials

研究方向： * Excellent knowledge in cement chmistry and mineralogy, cement hydration and morphology, polymers and bitumen emulsions as modifiers for cement and concrete; * Solid background in bitumen, polymer modified bitumen (PMB) and bitumen ecmulsions; * Many years experiences in road consturction and maintenance, as well related materials; * Strong ability to design, supervise and manage technical research programs; * Very disciplined with excellent working ethics as a tema leader.
科研项目： * Excellent knowledge in cement chmistry and mineralogy, cement hydration and morphology, polymers and bitumen emulsions as modifiers for cement and concrete; * Solid background in bitumen, polymer modified bitumen (PMB) and bitumen ecmulsions; * Many years experiences in road consturction and maintenance, as well related materials; * Strong ability to design, supervise and manage technical research programs; * Very disciplined with excellent working ethics as a tema leader.
获奖成果： M AIN PUBLICATIONS: 1 Papers in Journals (with peer review) 1.1 Sealing laat ZOAB langer leven Land+Water – Vakblad voor Civel – en Milieutechnici (in Dutch), No. 5, p. 22-24 (2000) 1.2 The Evolution of the Microstructure in Styrene Acrylate Polymer Modified-Cement Pastes at the Early State of Cement Hydration, The Journal of Advanced Cement Based Materials, vol.3, No.2/4, pp. 87-93, (1996) 1.3 Microstructure and Properties of (Styrene Acrylate) Polymer Cement Concrete, Journal of Heron, vol.40, No.4, pp.263-284, (1195) 1.4 The Influence of Polymer Modification on the Hydration of Cement Joumal of Cement and Concrete Research, vol.21. pp.535-544,(1991) 1.5 The Microstructrue of Polymer Modified Galss Fiber Reinforced Gypsum, Journal of Wuhan University of Technoloy. No.1, pp.1-7, (1991) 1.6 The Influence of Polymer Modification on the Adhesion of Cement Paste to Aggregates, Journal of Cement and Concrete Research vol.21, pp.726-736, (1191) 1.7 The Interface between Polymer Modified Cement Paste and Aggregates, Journal of Cement and Concrete Research vol.21.pp.983-990,(1191) 1.8 Effect of the Clay Containing Organic Compounds on the Mechanical Properties of Lime-Sand Silicate Concrete Products, Journal of Silicate Concrete Products, No:6,pp.6-9,(1190) 1.9 The lmpermeability of Cement Mortar by Dry-thermal Curing, Journal of Wuhan University of Technology (English version) No:2,pp.1-13,(1989);(Chinese version)No:1,pp.1-7,(1989) 1.10 Effect of Addition of Clay on the Mechanical Properties of Lime-Sand Brick, Journal of Silicate Concrete Products, No:5,pp.7-10,(1988) 1.11 Reaction of Cement with Water and Strength of Concrete Cured under Dry-hot Air” Journal of Concretes and Reinforced Concretes, No: 4,pp.37-48,(1983). 2 Papers in the Proceedings of Conferences (with peer review) 2.1 Elastomer Modified Bitumen and its Versatile pplications, The proceedings of 3rd International Conference Bituminous Mixture and Pavements, Thess aloniki, Greece, 21-22 November, Volume I, pp.35-43 , (2002) 2.2 Strategic Maintenance of pavements by sealing with A pecial mixture of bituminous emulsions, The proceedings of 3rd internaional Conference Bituminous Mixture and Pavements, Thessaloniki, Greece, 21 –22 November, Volume I, pp.91-100, (2002) 2.3 Strategic Maintenance by Sealing: Application of PenTack and its Effect on Asphalt Properties, Proceeedings of 2e Eurasphalt & Eurobitume Congress, September 20-22, 2000, Book2, pp.568-575(2000) 2.4 Lenvensduurverlenging van ZOAB M. B. V. Sealing-Techniek (in Dutch), Proceedings of Wegbouwkundige, Deel 1, pp.359-369(2000) 2.5 PenTack – An ldeal Product for Asphalt Road Maintenance, Proceedings of intemational Symposium on asphalt Emulsion Technology, pp.195-208, ISEAT99, Washington DC, USA, November11-14(1999) 2.6 A Practical Approacth to Optimising the Gradation of Aggregates in Cold Mix Design, Proceedings of international Symposium on asphalt Emulsion Technology, pp.289-302, ISEAT 99, Washington DC, USA, Noember 11-14 (1999) 2.7 A Practical Approach of the Mix Design for Cold Asphalt, The Proceedings of 2e World Congress on Emulsion, Bordeaux, France, pp.4-1a-351(1997) 2.8 Polymer Cement Concrete: A Contribbution to Modeling of the Microstructure, The Proceedings of RILEM Symposium, Oostende (Belgium), pp.19-27,(1995) 2.9 The Microstructure and Properties of Polymer Modified Cement Concrete (in German), Deutscher Ausschuss fur Stahlbeton – 29 . Forschungskolloquium Proceedings, pp.195-202,(1994) 2.10 The interaction of Polymer Dipersions with Portland Cement Paste, American MRS 1992 Symposium. Vol. 289,pp.199-204,(1993) 2.11 The Effect of Polymer Dispersions Modification on the interface between Cement Paste and Aggregates, 6th international Conference on Polymer in Concrete, pp.471-481, Shanghai, P.R.China, (1990) Book: Microstucture of Polymer Cement Concrete, published by Delft University Press (1995), ISBN:90-407-1083-X
其他信息： ESHA Group / Groningen / the Netherlands (1995-Present) Funciton – Chief Senior Researcher / Research Manager – ESHA Research Centre: Manage several parallel projects; make research programs, set objectives and activities, monitor progress and evaluate results of the projects. Provide technical service and advice to various business units inside ESHA Group. Completed several key projects: 1. PenTack – A special mixture of bitumen emulsions for asphalt highway and airfield maintenance. A theoretical model has been developed to predict the composition and dosage of PenTack system based on the factors of the existing road. The Dutch authority has prescribed this system as a standard method for highway maintenance. 2. Polymer modified bitumen (PMB) – an elastomer (SBS)was used to modify bitumen to produce super-high quality asphalt for expressway and runway in airfield. This technology has not only been used in Europe, but also transferred to China. 3. Polyurethane Bitumen – a very flexible and durable mateial for the bridge expansion and shrinkage joint. This material has already been put into use on the Dutch market. 4. Cold Recycling Asphalt – waste asphalt can be completely recycled by applying a few percent of bitumen emulsion in combination with cement. This is of significant impact on our environment and energy conservation. ? Practical engineering experience: Provide technical service and advice to several key projects, such as the construction of New Athens International Airport (bridge deck isolation for water proofing) and the maintenance of Copenhagen International Airport, also consultancy to the maintenance of Dutch highway system. ? Highly devloped research skill and methodology: Expertise a the organic materials, such as bitmen and polymer, as well as inorganic materials like cement. Using these skills and methods to solve lots of practical problems. Delft University of Technology / the NETHERLANDS (1991-1995) Function – Research Fellow: ?Conducted the investigation into effects of polymers on the hydration of cement, the evolution of the microstructure of cement paste and the interface between cement paste and aggregates. The attempt was made to relate these parameters to the properties of cement concrete. This is a continuation of the research program at TUD from 1988 to 1990. The various techniques were employed, such as SEM/EDAX, ESEM, leaser particle size distribution analyser, optical (fluorescent) microscopy, x-ray diffraction, thermo-gravimetry, mercury porosimetry, etc. ?Develped a polymer modified cement concrete system, which can be used in a ery severe environment, such as in critical climate conditions. ?Developed cement – bitumen emulsion system, which has been used for floors, for example, for sport halls, industrial workshops and parking areas. Wuhan University of Technology (WUT) / Wuhan / CHINA (1990-1991) Functin – Lecturer & Vice Director of Materials Science Section: ?Managed the daily research and teaching activities in the Section. Awarded for the most outstanding staff at WUT in 1991 (the highest honour in the University). ?Investigated polymer glass fibre – reinforced gypsum. ?Conducted an investigation into effect of polymer modification on the hydration of cement and the interface between cement paste and aggregates. ?Lectured on “Cement Chemistry” and “Concrete Properties and Technology”. The research achievements were published in the jounal of WTU and other magazines. Delft Uniersity of Technology / the Netherlands (1988-1990) Functin – Visiting Scholar: ?Conducted the first phase investigation into effects of polymer on the hydration of cement, the evolution of the microstructure of cement paster and th e interface between cement paste and aggregates. ?Carried out an ivestigation into effects of polmer modification on the adhesion between cement paste and aggregates. ?Investigatd polymer glass fibre-reinforced gypsum. Wuhan University of Technology / Wuhan / CHINA (1982-1988) Funcition – Lecturer of Materials Science Department of WUT: ?Conducted an investigation into the hydration of cement and concrete technology. Awarded for a substantial contribution to cement chemistry and concrete technology issued by “China Silicate Materials association” and “China Architecture Assocation” in 1989. ?Conducted research on the influence of curing condition on the hydration of cement and strength development of the concrete. ?Investigated the effect of curing condition on the permeability of the concrete. ?Lectured on “Building Ma terials” and “Concrete Technology”. EDUCATION: Dec. 1991-Jan. 1995 Ph. D. (Materials Science, Civil Engineering). Delft University of Technology, Delft, The Netherlands. Thesis entitled “Microstructure of Polymer Cement Concrete”, published by Delft University Press (1995), ISBN: 90-407-1083-X Sept. 1979-July 1982 M. Sc. (Cement and Concrete Materials Science). Hubei institute of Building Materials, China. Thesis entitled “Properties of Aerated Concrete”
备注： Zhao Su Marnelaan 45 9727 DS Grongingen The Nethrlands Emil: zhao.su@home.nl

附件下载: