一、姓名：黄尚宇

二、基本情况：

1、出生年月：1963年10月

2、学位：硕士

3、职称：教授

4、工作院系：材料成型加工系

三、教育经历（从大学开始）：

2005/08-2006/09，俄亥俄州立大学，材料加工工程，访问教授

1996/02-1996/07，哈尔滨工业大学，塑性加工，在职进修

1984/09-1987/03，南京航空学院，宇航制造工程，硕士

1980/09-1984/07，南京航空学院，宇航制造工程，学士

四、工作经历：

2010/03-至今， 武汉理工大学，材料成型加工系，教授/博导/系主任

2002/06-2010/03，武汉理工大学，材料成型及控制工程系，教授/博导/系主任

2001/03-2002/06，武汉理工大学，塑性成形与计算机应用研究所，教授/所长

2000/11-2001/03，武汉理工大学，车身设计与制造教研室，教授

2000/05-2000/11，武汉理工大学，车身设计与制造教研室，副教授

1996/10-2000/05，武汉汽车工业大学，车身设计与制造教研室，副教授

1995/05-1996/10，武汉汽车工业大学，车身设计与制造教研室，教师

1988/04-1995/05，武汉工学院，模具教研室，教师

1987/03-1988/04，武汉工学院，锻压教研室，教师

五、研究领域（不多于3个）：

1、轻量化、难成形材料成形加工新技术

2、材料成形过程模拟、优化及精确控制

3、微电子封装材料制备加工新技术

六、科研项目（不多于5项）：

1、微电子封装环保钎焊材料电磁压制制备技术的基础研究（国家自然科学基金：**）

2、高应变率复杂应变路径下车身高强钢的塑性变形行为研究（国家自然科学基金：**）

3、镁合金板材均匀压力线圈电磁温热复合成形基础研究（国家自然科学基金：**）

七、代表性论文及著作（不多于10项）：

[1]Fei Feng, Shangyu Huang*, Zhenghua Meng, Jianhua Hu. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Materials and Design, 57:10-20, 2014

[2]Fei Feng, Shangyu Huang*, Zhenghua Meng, JianhuaHu. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state. Materials Science & Engineering A, 594: 334-343, 2014

[3]Fei Feng, Shangyu Huang*, Jianhua Hu, Zhenghua Meng, Yu Lei. Analysis of the bulging process of AZ31B magnesium alloy sheet with a uniform pressure coil. The International Journal of Advanced Manufacturing Technology, 69: 1537-1545, 2013.

[4]冯飞,黄尚宇*,胡建华,雷雨,孟正华. 温度对AZ31B镁合金板材电磁成形的影响. 塑性工程学报 ,20(6):56-61, 2013

[5]雷雨,孟正华,胡建华,冯飞,黄尚宇.两种典型车用高强钢板高速率成形试验研究. 中国机械工程, 24(18):2529-2532, 2013.

[6]Zhenghua Meng, Shangyu Huang*, Jianhua Hu. Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets. Journal of Materials Processing Technology, 211(5): 863-867, 2011.

[7]孟正华,黄尚宇*,胡建华. 镁合金板材温热电磁复合成形试验研究. 机械工程学报, 47(10):38-42, 2011.

[8]余世浩、黄尚宇主编，模具CAD基础（国家“十一五”规划教材），武汉：武汉理工大学出版社，2009

[9]余世浩、华林、黄尚宇主编，CAD/CAM基础，北京：国防工业出版社，2007

[10]中国模具工程大典（主编第4卷第3篇冲模结构设计），北京：电子工业出版社，2007

八、联系方式：

1、Tel：**

2、E-mail：huangshy@whut.edu.cn

3、工作地址（实验室）：材料大楼402室



1.Name: Shangyu Huang

2.Brief introduction:

1)Date of birth: 11/10/1963

2)Degree: Master

3)Title: Professor

4)Working department: Department of Materials Processing

3.Education experience(after entering university):

2005/08-2006/09, The Ohio State University, Material Processing Engineering, Visiting Professor

1996/02-1996/07, Harbin Institute of Technology, Plastic Working, In-service Education

1984/09-1987/03, Nanjing Aeronautical Institute, Aeronautics and Astronautics Manufacture Engineering, Master

1980/09-1984/07, Nanjing Aeronautical Institute, Aeronautics and Astronautics Manufacture Engineering，Bachelor

4.Working experience:

2010/03-Present, Wuhan University of Technology, Department of Material Processing, Professor/Director

2002/06-2010/03, Wuhan University of Technology, Department of Material Molding and Control Engineering，Professor/Director

2001/03-2002/06, Wuhan University of Technology, Institute of Plastic Forming and Computer Application，Professor /Director

2000/11-2001/03, Wuhan University of Technology, Division of Auto-body Design and Manufacture，Professor

5.Research field(no more than 3):

1)New processing technology for difficult-to-form or lightweight material

2)Simulation, optimization and precise control of material forming process

3)New fabrication and processing technology for microelectronic packaging materials

6.Research project(no more than 5):

1）The basic study on fabrication of environment friendly adhesion material in microelectronic packaging by electromagnetic compaction (Project of NSFC：**)

2）Research on the plastic deformation behaviors of high strength steel for auto-body in high strain rate and complex strain paths (Project of NSFC：**)

3）Basic research on eletromagnetic and warming hybrid forming of magnesium alloy sheet using uniform pressure coil (Project of NSFC：**)

7.Representative papers and works(no more than 10):

（1）Fei Feng, Shangyu Huang*, Zhenghua Meng, Jianhua Hu. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Materials and Design, 57:10-20, 2014

（2）Fei Feng, Shangyu Huang*, Zhenghua Meng, JianhuaHu. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state. Materials Science & Engineering A, 594: 334-343, 2014

（3）Fei Feng, Shangyu Huang*, Jianhua Hu, Zhenghua Meng, Yu Lei. Analysis of the bulging process of AZ31B magnesium alloy sheet with a uniform pressure coil. The International Journal of Advanced Manufacturing Technology, 69: 1537-1545, 2013.

（4）Feng Fei, Huang Shangyu*, Hu Jianhua, Lei Yu, Meng Zhenghua. Effects of temperature on electromagnetic forming of AZ31B magnesium alloy sheet. Journal of Plasticity Engineering,20(6):56-61, 2013.

（5）Lei Yu, Meng Zhenghua, Hu Jianhua, Feng Fei, Huang Shangyu. Experimental investigation on high rate forming of two kinds of typical High-strength steel in car manufacture. China Mechanical Engineering, 24(18):2529-2532, 2013.

（6）Zhenghua Meng, Shangyu Huang*, Jianhua Hu. Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets. Journal of Materials Processing Technology, 211(5): 863-867, 2011.

（7）Meng Zhenghua, Huang Shangyu*, Hu Jianhua. Experimental Research on Warm and Electromagnetic Hybrid Forming of Magnesium Alloy Sheet, Chinese Journal of Mechanical Engineering, 47(10):38-42, 2011.

（8）Yu Shihao, Huang Shangyu. Basic of Die＆Mould CAD (“Eleventh Five-Year Plan” National Level Official Textbook), Wuhan: Wuhan University of Technology Press, 2009.

（9）Yu Shihao, Hua Lin, Huang Shangyu. Basic of CAD/CAM, Beijing:National Defence Industry Press, 2007.

（10）China Die＆Mould Engineering Canon (Editor Article 3 in Volume 4 : Structure Design of Stamping Die & Mould), Beijing: Publishing House of Electronics Industry, 2007.

8.Contact information:

1) Tel: **

2) E-mail: huangshy@whut.edu.cn

3) Location of lab: Room 402 in The Material Building
附件下载: