一、姓名:罗国强
二、基本情况:
1、出生年月:1980-10
2、学位:博士
3、职称:副研究员
4、工作院系:材料复合新技术国家重点实验室
三、教育经历(从大学开始):
1997年9月-2001年7月,武汉理工大学(原武汉工业大学),材料科学与工程专业,本科/大学
2001年9月-2004年7月,武汉理工大学,材料学,研究生/硕士
2004年9月-2007年6月,武汉理工大学,材料加工工程,研究生/博士
四、工作经历:
2007年9月-2010年3月中国工程物理研究院流体物理研究所,冲击波物理与爆轰物理国防科技重点实验室,凝聚态物理博士后
2010年9月至今,武汉理工大学,材料复合新技术国家重点实验室,讲师、副研究员。
五、研究领域(不多于3个):
先进复合材料以及功能梯度复合材料的设计、制备技术、结构控制、性能及应用研究
六、科研项目(不多于5项):
国家自然科学基金(项目编号:**)密度梯度飞片复杂加载理论与实验研究,2011.01-2013.12, 项目负责人
国家自然科学基金(项目编号:** ):用于复杂加载技术的功能梯度飞片材料的设计、薄带铸造法制备及其性能,2013.01-2015.12, 项目负责人
武汉理工大学自主创新基金:先进热管理复合材料的微结构设计、调控与性能增强,(项目批准号:2013-II-024)”,2013.06-2015.05, 项目负责人
七、代表性论文及著作(不多于10项):
[1]S.L.Liu, K.Yu, Q.Shen, M.J.Li, W.S.Chen, G.Q.Luo, L.M.Zhang: Fabrication of W@Cu composite powders by direct electroless plating using a dripping method. Journal of Wuhan University of Technology-Materials Science Edition, 2013, 28(4): 829-833
[2] P.A.Chen, G.Q.Luo*, Q.Shen, M.J.Li, L.M.Zhang: Thermal and electrical properties of W-Cu composite produced by activated sintering. Materials & Design, 2013, 46: 101-105(Corresponding author)
[3] G.Q.Luo, X.J.Jiang, M.J.Li, Q.Shen, L.M.Zhang, H.G.Yu: Facile Fabrication and Enhanced Photocatalytic Performance of Ag/AgCl/rGO Heterostructure Photocatalyst. Acs Applied Materials & Interfacse, 2013, 5(6): 2161-2168
[4] G.Q.Luo, J.Zhang, M.J.Li, Q.Q.Wei, Q.Shen, L.M.Zhang: Interfacial Microstructure and Mechanical Strength of 93W/Ta Diffusion-Bonded Joints with Ni Interlayer. Metallurgical and materials transactions A-Physical Metallurgy and Materials Science, 2013, 44A(2): 602-605
[5] Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 559: 868-874
[6] P.A.Chen, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: The mechanical properties of W-Cu composite by activated sintering. International Journal of Refractory Metals & Hard Materials, 2013, 36: 220-224
[7] Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg-Al joints. Journal of Alloys and Compounds, 2012,541: 458-461
[8] C.Chen, J.G.Li, G.Q.Luo*, Y.L.Xiong, Q.Shen, L.M.Zhang: Size-controlled in situ synthesis and photo-responsive properties of silver/poly(methyl methacrylate) nanocomposite films with high silver content. Applied Surface Science, 2012, 258(24): 10180-10184
[9] J.Zhang, G.Q.Luo, Y.Y.Wang, Q.Shen, L.M.Zhang: An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer. Materials Letters, 2012, 83: 189-191
[10] J.Zhang, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer. Materials & Design, 2012, 39: 81-86
八、联系方式:
1、Tel:**,**013
2、E-mail:luoguoqiang1980@sina.com
3、工作地址(实验室):武汉理工大学西院逸夫楼五楼,430070
1.Name:LUO Guoqiang
2.Brief introduction:
1)Date of birth:Oct.,1980
2)Degree:Doctor
3)Title:Associate Professor
4)Working department:State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology
3.Education experience(after entering university):
Sept. 2004 - June 2007Ph.D. degree in Materials Processing Engineering
Wuhan University of Technology, Wuhan, P.R. China
Sept. 2001 - June 2004M.S. degree in Materials Science
Wuhan University of Technology, Wuhan, P.R. China
Sept. 1997 - June 2001B.S. degree in Materials Science and Engineering
Wuhan University of Technology, Wuhan, P.R. China
4.Working experience:
Oct. 2010 - present Associate Professor
Wuhan University of Technology, Wuhan, P.R. China
July 2007 - Sept. 2010 Postdoctor
Institute of fluid physics, China Academy of Engineering Physics, Sichuan, P.R. China
5.Research field(no more than 3):
Novel composite materials including functionally graded materials(FGMs),Metal matrix composites(MMCs) and Ceramic reinforced composites(CRC)
Advanced processing technologies for novel composite, such as diffusion bonding (DB), tape-casting, spark plasma sintering (SPS), plasma activated sintering (PAS) and MA-HP
6.Research project(no more than 5):
The National Natural Science Foundation of China (NSFC): Theoretical and experimental research on complex-loading property of density gradient flyer-plate materials, No. **, 2011.01-2013.12, Person in Charge
The National Natural Science Foundation of China (NSFC): Research on design and preparation of functionally gradient flyer-plate materials using complex-loading technology, No. **, 2013.01-2015.12, Person in Charge
The Fundamental Research Funds for the Central Universities: Enhanced properties of advanced thermal management composites with designable and controllable microstructure, No. WUT: 2013-II-024, 2013.06-2015.05, Person in Charge
7.Representative papers and works(no more than 10):
[1] S.L.Liu, K.Yu, Q.Shen, M.J.Li, W.S.Chen, G.Q.Luo, L.M.Zhang: Fabrication of W@Cu composite powders by direct electroless plating using a dripping method. Journal of Wuhan University of Technology-Materials Science Edition, 2013, 28(4): 829-833
[2] P.A.Chen, G.Q.Luo*, Q.Shen, M.J.Li, L.M.Zhang: Thermal and electrical properties of W-Cu composite produced by activated sintering. Materials & Design, 2013, 46: 101-105(Corresponding author)
[3] G.Q.Luo, X.J.Jiang, M.J.Li, Q.Shen, L.M.Zhang, H.G.Yu: Facile Fabrication and Enhanced Photocatalytic Performance of Ag/AgCl/rGO Heterostructure Photocatalyst. Acs Applied Materials & Interfacse, 2013, 5(6): 2161-2168
[4] G.Q.Luo, J.Zhang, M.J.Li, Q.Q.Wei, Q.Shen, L.M.Zhang: Interfacial Microstructure and Mechanical Strength of 93W/Ta Diffusion-Bonded Joints with Ni Interlayer. Metallurgical and materials transactions A-Physical Metallurgy and Materials Science, 2013, 44A(2): 602-605
[5] Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 559: 868-874
[6] P.A.Chen, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: The mechanical properties of W-Cu composite by activated sintering. International Journal of Refractory Metals & Hard Materials, 2013, 36: 220-224
[7] Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg-Al joints. Journal of Alloys and Compounds, 2012,541: 458-461
[8] C.Chen, J.G.Li, G.Q.Luo*, Y.L.Xiong, Q.Shen, L.M.Zhang: Size-controlled in situ synthesis and photo-responsive properties of silver/poly(methyl methacrylate) nanocomposite films with high silver content. Applied Surface Science, 2012, 258(24): 10180-10184
[9] J.Zhang, G.Q.Luo, Y.Y.Wang, Q.Shen, L.M.Zhang: An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer. Materials Letters, 2012, 83: 189-191
[10] J.Zhang, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer. Materials & Design, 2012, 39: 81-86
8.Contact information:
1) Tel:**,**013
2) E-mail:luoguoqiang1980@sina.com
3) Location of lab:State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, P.R. China
附件下载:
删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
武汉理工大学材料科学与工程学院导师简介-罗国强
武汉理工大学 免费考研网/2015-08-21
相关话题/材料
武汉理工大学材料科学与工程学院导师简介-朱兴元
朱兴元1964年12月出生,2000年获工学博士学位,副教授。现就职于材料科学与工程学院材料成型与控制工程系。教育经历2008年4月~2009年3月:加拿大多伦多大学 材料科学与工程系 博士后研究1995年9月~2000年6月:北京科技大学 冶金物化专业 获工学博士学位1989年9月~1992年3月 ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-朱泉峣
一、姓名: 朱泉峣二、基本情况:1、出生年月:1968.102、学位: 博士3、职称: 副教授4、工作院系: 材料学院材科系三、教育经历(从大学开始):1986.9-1990.6:武汉化工学院精细化工专业,本科1996.9-1999.6:武汉工业大学复合材料专业,硕士研究生1999.9-2002.3 ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-朱明
一、姓名: 朱明二、基本情况:1、出生年月 1960-11 2、学位: 博士3、职称: 副教授4、工作院系: 材料学院三、教育经历(从大学开始): 1979.9~83.6 武汉建材学院 学士1992.9~95.6 武汉工业大学 硕士1998.9~2005.12 武汉理工大学 博士四、工作经历:198 ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-朱春东
一、姓名:朱春东二、基本情况:1、出生年月:1963年2月2、学位:硕士3、职称:副教授4、工作院系:材料学院、材料成型与控制工程系三、教育经历1980年9月~1984年7月,武汉工学院锻压专业,学士学位1990年9月~1993年6月,武汉汽车工业大学压力加工专业,硕士学位四、工作经历1984年8月 ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-周立秋
周立秋 男 1953 副教授 硕导研究方向气、固、液态燃料混合燃烧技术研究;燃烧器流场数值模拟研究水泥工业窑炉燃烧研究开发 附件下载: ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-赵玉民
赵玉民 男 1951 副教授 硕导 材料成型系党支部书记研究方向材料精密成型与模具设计;材料成型与计算机模拟金属环件冷辗扩成型机理及工艺设备研究;精密挤轧空心花键轴工艺及装置;汽车电机爪极成型工艺及模具 附件下载: ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-赵青林
姓名:赵青林汉语拼音:Zhao Qinglin 性别:女出生年月:1972.12出生地:中国 湖北 当阳婚姻状况:已婚健康状况:优秀国籍:中国最后学位:博士技术职称:副研究员专业:材料学地址:武汉理工大学材料科学与工程学院; 硅酸盐材料工程中心教育部重点实验室,430070电话:**,**E-Mai ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-赵前
一、姓名: 赵前二、基本情况:1、出生年月 :1961年7月 2、学位: 硕士3、职称: 副研究员4、工作院系: 材料科学与工程系三、教育经历(从大学开始): 1980年9月-2004年7月 武汉理工大学 水泥专业1987年7月-1990年5月 武汉理工大学 在职硕士 无机非金属材料专业2004年9 ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-赵春霞
一、姓名:赵春霞二、基本情况:1、出生年月 1977.32、学位 博士研究生3、职称 副教授4、工作院系 材料科学与工程学院三、教育经历(从大学开始)1996.09~2000.07郑州大学环境工程专业学习,获工学学士学位2000.09~2003.06武汉理工大学环境工程专业学习,获工学硕士学位200 ...研究生导师 武汉理工大学 免费考研网 2015-08-21武汉理工大学材料科学与工程学院导师简介-张强
, 附件下载: ...研究生导师 武汉理工大学 免费考研网 2015-08-21