一、姓名：何亮
二、基本情况：

1、出生年月：1982年7月

2、学 位：博士（工学）

3、职 称：助理研究员

4、工作院系：武汉理工大学材料复合新技术国家重点实验室

武汉理工大学-哈佛大学纳米联合重点实验室

三、教育经历（从大学开始）：

l1999/09-2003/07，武汉理工大学，材料科学与工程学院，获得工学学士学位，导师：黄从运教授；

l2004/09-2007/07，清华大学，材料科学与工程系（现材料学院），获得工学硕士学位，导师：张政军教授；

l2007/10-2009/09，日本国东京工业大学，信息与通信技术课程，电子物理工学专攻（量子与纳电子学研究中心），获得工学硕士学位，导师：小田俊理教授；

l2009/10-2012/12，日本国东北大学，机械系统与设计专攻，江刺-小野-田中研究组（现小野-户田研究组），获得工学博士学位，导师：小野崇人教授。

四、工作经历：

l2013/01-2013/05，日本国东北大学微系统融合研究开发中心，博士研究员；

l2013/05-至今，武汉理工大学，材料复合新技术国家重点实验室，武汉理工大学-哈佛大学纳米联合重点实验室，助理研究员。

五、研究领域（不多于3个）：

硅基微纳器件与系统（微型水平仪、扭转型微镜、并行式微型电子源等）、基于C-MEMS的三维微纳结构的微加工工艺及性能、低维材料与纳米结构的器件化集成及应用

六、科研项目（不多于5项）：

1. 基于硅基微镜的镍-碳纳米管高深宽比微结构的微力学性能的原位表征，武汉理工大学自主创新研究项目，负责人。

2. 碳纳米管复合材料微结构在硅基微镜器件中的应用，武汉理工大学博士科研启动经费，负责人。

3. 梯度热解静电纺丝法制备高性能介孔纳米管电极材料，武汉理工大学自主创新研究项目（青年教师探索研究项目），负责人。

七、代表性论文及著作（不多于10项）：

1.L. Zhang, K.N. Zhao, W.W. Xu, J.S. Meng, L. He*, Q.Y. An, X. Xu, Y.Z. Luo, T.W. Zhao and L.Q. Mai, Mesoporous VO2 nanowires with excellent cycling stability and enhanced rate capability for lithium batteries, RSC Advances, 4, pp 33332-33337, 2014.

2.W.W. Xu, K.N. Zhao, C.J. Niu, L. Zhang, Z.Y. Cai, C.H. Han, L. He*, T. Shen, M.Y. Yan, L.B. Qu and L.Q. Mai*, Heterogenrous Branched Core-shell SnO2-PANI Nanorod Arrays with Mechanical Integrity and Three Dimensional Electron Transport for Lithium Batteries, Nano Energy, 8, pp 196-204, 2014.

3.S. Li, Y.F. Dong, L. Xu, X. Xu, L. He and L.Q. Mai*, Effect of Carbon Matrix Dimensions on the Electrochemical Properties of Na3V2(PO4)3 Nanograins for High-performance Symmetric Sodium-ion Batteries, Advanced Materials, DOI: 10.1002/adma.**, 2014.

4.L. He*, M. Toda, Y. Kawai, H. Miyashita, M. Omori, T. Hashida, R. Berger and T. Ono, Fabrication of CNT-Carbon Composite Microstructures Using Si Micromolding and Pyrolysis, Microsystem Technologies, 20 (2), pp 201-208, 2014.

5.X.C. Tian, X. Xu, L. He, Q.L. Wei, M.Y. Yan, L. Xu, Y.L. Zhao, C.C. Yang and L.Q. Mai*, Ultrathin Pre-Lithiated V6O13 Nanosheet Cathodes with Enhanced Electrical Transport and Cyclability, Journal of Power Sources, 255, pp 235-241, 2014.

6.Q.Y. An, P.F. Zhang, Q.L. Wei, L. He*, F.Y. Xiong, J.Z. Sheng, Q.Q. Wang and L.Q. Mai*, Top-Down Fabrication of Three-Dimensional Porous V2O5 Hierarchical Microplates with Tunable Porosity for Improved Lithium Batteries, Journal of Materials Chemistry A, 2, pp 3297-3302, 2013.

7.L. He*, M. Toda, Y. Kawai, M. F. Sarbi, M. Omori, T. Hashida and T. Ono, Fabrication of a Si-PZT Hybrid XY-microstage with CNT-Carbon Hinges, IEEJ Transactions on Sensors and Micromachines, 132 (11), pp 425-426, 2012.

8.L. He*, M. Toda, Y. Kawai, H. Miyashita, C. Y. Shao, M. Omori, T. Hashida and T. Ono, Fabrication of High Aspect Ratio Carbon Nanotube-Carbon Composite Microstructures Based on Silicon Molding Technique, Transducers, 6-9 June, 16, pp 2331-2334, Beijing, P.R. China, 2011 (固态传感器、驱动器和微电子机械系统领域国际顶级会议论文).

9.T. Ono*, H. Miyashita, M. Toda, Y. Kawai, L. He and M. Esashi, Integration of Nanomaterials into Microsystem, The 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT2010), 5-8 July, W1D, Perth, Western Australia, 2010 (邀请演讲).

10.L. He, Z.C. Li and Z.J. Zhang, Rapid, low-temperature synthesis of single-crystalline Co3O4 nanorods on silicon substrates on a large scale, Nanotechnology, 19, 155606, 2008.

八、联系方式：

1、Tel：177-7**-5983-1149

2、E-mail：hel@whut.edu.cnhe-l04@mails.tsinghua.edu.cn

3、工作地址（实验室）：

武汉理工大学-哈佛大学纳米联合重点实验室

武汉理工大学马房山校区西院33号楼



1.Name: Liang HE

2.Brief introduction:

1)Date of birth: July, 1982

2)Degree: Ph.D. (Engineering)

3)Title: Assistant Professor

4)Working department: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, WUT-Harvard Joint Nano Key Laboratory, Wuhan University of Technology

3.Education experience(after entering university):

1999/09-2003/07, Wuhan University of Technology (P.R. China), School of Materials Science and Engineering, Bachelor (Engineering), Supervisor: Prof. Congyun Huang;

2004/09-2007/07, Tsinghua University (P.R. China), Department of Materials Science and Engineering, Master (Engineering), Supervisor: Prof. Zhengjun Zhang;

2007/10-2009/09, Tokyo Institute of Technology (Japan), Information and Communication Technology Course, Department of Physical Electronics (Quantum and Nanoelectronics Research Center), Master (Engineering), Supervisor: Prof. Shunri Oda;

2009/10-2012/12, Tohoku University (Japan), Department of Mechanical Systems and Design, Esashi-Ono-Tanaka Laboratoty (Now: Ono-Toda Laboratory), Ph.D. (Engineering), Supervisor: Prof. Takahito Ono.

4.Working experience:

2013/01-2013/05, Micro System Integration Center, Tohoku University (Japan), Research Associate;

2013/05-Now, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, WUT-Harvard Joint Nano Key Laboratory, Wuhan University of Technology, Assistant Professor.

5.Research field(no more than 3):

Si-Based Micro/Nano devices and Systems (Microstage, Micromirror, Field-emitter, etc.);

3D Micro/Nano Electrodes Based on Carbon-MEMSs;

Integration of Nanomaterials into MicroSystems.

6.Research project(no more than 5):

In-situ Characterizations of Micromechanics of High Aspect Ratio Ni-CNT Composite Based on Si Micromirror, Fundamental Research Funds for the Central Universities.

7.Representative papers and works(no more than 10):

[1] L. Zhang, K.N. Zhao, W.W. Xu, J.S. Meng, L. He*, Q.Y. An, X. Xu, Y.Z. Luo, T.W. Zhao and L.Q. Mai, Mesoporous VO2 nanowires with excellent cycling stability and enhanced rate capability for lithium batteries, RSC Advances, 4, pp 33332-33337, 2014.

[2] W.W. Xu, K.N. Zhao, C.J. Niu, L. Zhang, Z.Y. Cai, C.H. Han, L. He*, T. Shen, M.Y. Yan, L.B. Qu and L.Q. Mai*, Heterogenrous Branched Core-shell SnO2-PANI Nanorod Arrays with Mechanical Integrity and Three Dimensional Electron Transport for Lithium Batteries, Nano Energy, 8, pp 196-204, 2014.

[3] S. Li, Y.F. Dong, L. Xu, X. Xu, L. He and L.Q. Mai*, Effect of Carbon Matrix Dimensions on the Electrochemical Properties of Na3V2(PO4)3 Nanograins for High-performance Symmetric Sodium-ion Batteries, Advanced Materials, DOI: 10.1002/adma.**, 2014.

[4] L. He*, M. Toda, Y. Kawai, H. Miyashita, M. Omori, T. Hashida, R. Berger and T. Ono, Fabrication of CNT-Carbon Composite Microstructures Using Si Micromolding and Pyrolysis, Microsystem Technologies, 20 (2), pp 201-208, 2014.

[5] X.C. Tian, X. Xu, L. He, Q.L. Wei, M.Y. Yan, L. Xu, Y.L. Zhao, C.C. Yang and L.Q. Mai*, Ultrathin Pre-Lithiated V6O13 Nanosheet Cathodes with Enhanced Electrical Transport and Cyclability, Journal of Power Sources, 255, pp 235-241, 2014.

[6] Q.Y. An, P.F. Zhang, Q.L. Wei, L. He*, F.Y. Xiong, J.Z. Sheng, Q.Q. Wang and L.Q. Mai*, Top-Down Fabrication of Three-Dimensional Porous V2O5 Hierarchical Microplates with Tunable Porosity for Improved Lithium Batteries, Journal of Materials Chemistry A, 2, pp 3297-3302, 2013.

[7] L. He*, M. Toda, Y. Kawai, M. F. Sarbi, M. Omori, T. Hashida and T. Ono, Fabrication of a Si-PZT Hybrid XY-microstage with CNT-Carbon Hinges, IEEJ Transactions on Sensors and Micromachines, 132 (11), pp 425-426, 2012.

[8] L. He*, M. Toda, Y. Kawai, H. Miyashita, C. Y. Shao, M. Omori, T. Hashida and T. Ono, Fabrication of High Aspect Ratio Carbon Nanotube-Carbon Composite Microstructures Based on Silicon Molding Technique, Transducers, 6-9 June, 16, pp 2331-2334, Beijing, P.R. China, 2011.

[9] T. Ono*, H. Miyashita, M. Toda, Y. Kawai, L. He and M. Esashi, Integration of Nanomaterials into Microsystem, The 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT2010), 5-8 July, W1D, Perth, Western Australia, 2010 (Invited Talk).

[10] L. He, Z.C. Li and Z.J. Zhang, Rapid, low-temperature synthesis of single-crystalline Co3O4 nanorods on silicon substrates on a large scale, Nanotechnology, 19, 155606, 2008.

8.Contact information:

1) Tel: +86-177-7181-9551+86-27-5983-1149

2) E-mail: hel@whut.edu.cnhe-l04@mails.tsinghua.edu.cn

3) Location of lab: 33 Building, West Campus, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, P.R. China

附件下载: