一、姓名： 周卫兵二、基本情况：

1、出生年月:1974.6

2、学 位:博士研究生

3、职 称:副教授

4、工作院系:材料科学与工程学院无机非金属系

三、教育经历：

1992.9-1996.6 盐城工学院大学

2000.9-2003.6 材料复合新技术国家重点实验室 硕士研究生

2003.9-2006.6 材料复合新技术国家重点实验室 博士研究生

四、工作经历

1996.12-2000.6 盐城建筑安装工程总公司 助理工程师

2006.6- 目前 武汉理工大学材料科学与工程学院 教师

五、研究领域：

1.新型储热材料2.功能建筑材料 3.功能陶瓷材料

六、科研项目：

1. 中温储热材料性能测试与评价方法研究, 项目负责人，国家支撑计划,40万

2. 新型低钙水泥及掺磷水泥熟料的生产技术开发,项目负责人，企业委托， 30万

3. 中温太阳能储热材料与装置研究,项目骨干，国家支撑计划,360万

4.太阳能热利用混凝土储热材料及系统的开发研究, 项目骨干，武汉市科技攻关,20万

5.太阳能热发电用储热混凝土材料体系与换热结构耦合设计与制备技术研究，863项目，项目骨干，70万元

七、代表性论文及著作：

1. I.M. Low, Yanchun Zhou(Editors). Book titled “MAX Phases: Microstructure, Properties and Applications”. (Chapter Ⅴ. Fabrication of Ti3SiC2 by Spark Plasma Sintering. Author: Weibing Zhou et al) Nova Science Publishers, Inc.2011

2. Rapid reactive synthesis of Ti2AlC-TiB2 composites by spark plasma sintering，Journal of Ceramic Processing Research，2009,10(1):102-104

3. Synthesis of Ti3SiC2/TiB2 Composite by In-situ Hot Pressing (HP) Method，Journal of Wuhan University of Technology-Materials Science Edition，2009,23(6):863-865

4. Effect of Tin on the Reaction Synthesis of Ternary Carbide Ti3AlC2，Journal of Wuhan University of Technology-Materials Science Edition，2009,24(2):283-286

5. Fabrication of high-purity Ti3AlC2 by spark plasma sintering technique，Ceramics International，2007，33:1399-1402

6. Rapid synthesis of Ti3AlC2/TiB2 composites by the spark plasma sintering (SPS) technique，Ceramics International，2009，35（8）3507-3510

7. Fabrication of high-purity ternary carbide Ti3SiC2 by spark plasma sintering technique，Materials letters，2005, 59 :1547-1551

8. Fabrication of high purity dense Ti2AlC/Ti3AlC2 composite by spark plasma sintering method，Journal of materials science，2005, 40 : 3559-3560

9. Rapid synthesis of Ti2AlC by spark plasma sintering technique，Materials letters，2005, 59 : 131-134

10. Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering(SPS) technique，Journal of materials science，2005, 40 : 2099-2100

八、联系方式：

1、Tel： **

2、E-mail：jsyczwb@whut.edu.cn

工作地址（实验室）：硅酸盐建筑材料国家重点实验室混凝土楼414
1.Name: Zhou Weibing

2.Brief introduction:

1)Date of birth: 06/1974

2)Degree: Ph.D

3)Title: Associate Professor

4)Working department: School of Materials Science and Engineering,

3.Education experience(after entering university):

2003/06-2006/06 Wuhan University of Technology Ph.D

2000/06-2003/06 Wuhan University of Technology M.D

1993/06-1996/06 Yancheng Institute of Technology

4.Working experience:

2006/06-presentWuhan University of Technology,Teacher

1996/12-2000/06 Yancheng construction and installation engineering company, Assistant Engineering

5.Research field(no more than 3):

[1].New type heat storage material

[2].Functional construction material

[3]. Functional ceramic material

6.Research project(no more than 5):

[1].Test and evaluation method of the heat storage material performance. Project in charge, National support plan, 400,000.

[2].Production technology development of the new type of low calcium cement and doped phosphorous cement clinker. Project in charge, Enterprise commission, 300,000.

[3].Solar thermal storage material and device research in middle temperature.Project main participate, Nationalscience foundation plan, 3,600,000.

[4].Development of heat storage material and system research of solar thermal utilization concrete.Project main participate, Wuhan science and technology research plan, 200,000.

[5].The research of storing heat concrete material system and the designing of transfer thermal couplingstructure for solar thermal utilization. 863 project, Project main participate, 700,000.

7.Representative papers and works(no more than 10):

[1].I.M. Low, Yanchun Zhou(Editors). Book titled “MAX Phases: Microstructure, Properties and Applications”. (Chapter Ⅴ. Fabrication of Ti3SiC2 by Spark Plasma Sintering. Author: Weibing Zhou et al) Nova Science Publishers, Inc.2011

[2].Rapid reactive synthesis of Ti2AlC-TiB2 composites by spark plasma sintering，Journal of Ceramic Processing Research，2009,10(1):102-104

[3].Synthesis of Ti3SiC2/TiB2 Composite by In-situ Hot Pressing (HP) Method，Journal of Wuhan University of Technology-Materials Science Edition，2009,23(6):863-865

[4].Effect of Tin on the Reaction Synthesis of Ternary Carbide Ti3AlC2，Journal of Wuhan University of Technology-Materials Science Edition，2009,24(2):283-286

[5].Fabrication of high-purity Ti3AlC2 by spark plasma sintering technique，Ceramics International，2007，33:1399-1402

[6].Rapid synthesis of Ti3AlC2/TiB2 composites by the spark plasma sintering (SPS) technique，Ceramics International，2009，35（8)3507-3510

[7].Fabrication of high-purity ternary carbide Ti3SiC2 by spark plasma sintering technique，Materials letters，2005, 59 :1547-1551

[8].Fabrication of high purity dense Ti2AlC/Ti3AlC2 composite by spark plasma sintering method，Journal of materials science，2005, 40:3559-3560

[9].Rapid synthesis of Ti2AlC by spark plasma sintering technique，Materials letters，2005, 59 : 131-134

[10]. Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique，Journal of materials science，2005, 40: 2099-2100

8.Contact information:

1) Tel: **

2) E-mail: jsyczwb@whut.edu.cn

3) Location of lab: Room 414. Concrete Building, State Key Lab of Silicate Materials for Architecture
附件下载: