更新日期：2018年8月31日
姓 名 王智 性 别 男
出生年月 1982年11月 籍贯 湖南新化县
民 族 汉族 政治面貌 党员
最后学历 博士研究生 最后学位 工学博士
技术职称 教授 导师类别 博、硕导
行政职务Email wangzhi@scut.edu.cn
工作单位 华南理工大学机械与汽车工程学院 邮政编码
通讯地址
单位电话
个人主页 https://scholar.google.com/citations?user=jRvnB24AAAAJ&hl=en


个人简介
主要研究方向为高性能铝合金、3D打印金属材料、金属基复合材料、金属玻璃。

2010-2014获德国德累斯顿工业大学材料科学博士学位，2014-2016年在日本东北大学工作，2016年11月起在华南理工大学机械与汽车工程学院工作。

在国际知名刊物NPG Asia Materials, Acta Materialia，International Journal of Plasticity 等发表论文，主持日本学术振兴会（JSPS）若手研究 (B) 、挪威国际合作项目、国家自然科学基金青年基金、广州市一般项目、华南理工大学中央高校项目等项目。

与国内外知名单位建立了广泛的合作关系，包括德国IFW, TU Dresden, TU Berlin、日本东北大学、美国威斯康辛大学麦迪逊分校、美国中佛罗里达大学、英国剑桥大学、挪威科技大学、爱沙尼亚塔林工业大学等著名研究机构和院校。
工作经历
2014.04-2014.09 日本东北大学 Researcher
2014.10-2016.10 日本东北大学 Research Associate
2016.11至今 华南理工大学 教授
教育经历
2007.06 湘潭大学 学士
2007-2010 华南理工大学 硕博
2014.07 德国德累斯顿工业大学 材料科学 博士
研究领域
高性能铝合金、3D打印金属材料、金属基复合材料、金属玻璃
科研项目
主持日本学术振兴会（JSPS）若手研究 (B) 1 项，403万日元；主持国家自然科学基金青年科学基金项目1项；主持挪威教育国际合作中心项目1项（国家合作方负责人，挪威方负责人为KG Prashanth，198.6万挪威克朗）；主持广州市科技创新发展专项一般项目1项；主持华南理工大学杰出人才与团队引进计划1项；主持中央高校基本科研业务费面上项目1项；参与国家军品配套科研项目1项，国家自然科学基金面上项目1项，日本东北大学联合项目 1项。
发表论文
1.Zhi Wang*, Ruitao Qu, Sergio Scudino, Baoan Sun, Konda G. Prashanth, Dmitri Louzguine-Luzgin, Mingwei Chen, Zhefeng Zhang, Jurgen Eckert. Hybrid Nanostructured Aluminum Alloy with Super-High Strength, NPG Asia Materials, 2015, 7 (12), e229:1-8
2.Z. Wang, S. V. Ketov, C. L. Chen, Y. Shen, Y. Ikuhara, A. A. Tsarkov, D. V. Louzguine-Luzgin, J. H. Perepezko. Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses, Acta Materialia 132(2017) 298-306.
3. Z. Wang*, K.G. Prashanth, K.B. Surreddi, C. Suryanarayana, J. Eckert. Scudino. Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders, Materialia, in press.
4.Z Wang*, K. Georgarakisa, K. Nakayama, Y. Li, G. Xie, D. Louzguine-Luzgin, A. Yavari, Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites, Scientific Reports, 6( 2016), Article number:24384.
5.Z. Wang*, S. Ketov, B. Sun, C. Chen, A. Churyumov, D. Louzguine-Luzgin. Eutectic crystallization during fracture of Zr-Cu-Co-Al metallic glass, Materials Science and Engineering: A, 657 (2016)210-214.
6.Z. Wang*, S. Scudino, M. Stoica, W.W. Zhang, J. Eckert. “Al-based matrix composites reinforced with short Fe-based metallic glassy fiber”, Journal of Alloys and Compounds, 651(2015) 170-175.
7.Z. Wang*, K. G. Prashanth, A.K. Chaubey, L. L?ber, F.P. Schimansky, F. Pyczak, W.W. Zhang, S. Scudino, J. Eckert, Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles, Journal of Alloys and Compounds, 630, (2015) 256-259.
8.Z. Wang, K. G. Prashanth, S. Scudino, J. He, W. W. Zhang, Y. Y. Li, M. Stoica, G. Vaughan, D. J. Sordelet, J. Eckert, Effect of ball-milling on microstructure and thermal stability of Al84Gd6Ni7Co3 glassy powders, Intermetallics, 46 (2014) 97–102.
9.Z. Wang*, J. Tan, B.A. Sun, S. Scudino, K.G. Prashanth, W.W. Zhang, Y.Y. Li, J. Eckert, Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles, Materials Science and Engineering: A, 600 (2014) 53-58.
10.Z. Wang*, J. Tan, S. Scudino, B. A. Sun, R. T. Qu, J. He, K. G. Prashanth, W. W. Zhang, Y. Y. Li, J. Eckert, Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glass, Advanced Powder Technology, 25 (2014) 635-639.
11.Z. Wang*, K.G. Prashanth, S. Scudino, A. K. Chaubey, D. J. Sordelet, W. W. Zhang, Y. Y. Li, J. Eckert, Tensile properties of Al matrix composites reinforced with in-situ devitrified Al84Gd6Ni7Co3 glassy particles, Journal of Alloys and Compounds, 586, (2014) S419-S422.
12.Z. Wang*, S. Scudino, K.G. Prashanth, J. Eckert, Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy, Materials Letters, 185 (2016) 25-28.
13.Z. Wang*, S. Scudino, K.G. Prashanth, J. Eckert, Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass, Journal of Alloys and Compounds, 707（2017）63-67.
14.Z. Wang*, K. Georgarakis, W.W. Zhang, K.G. Prashanth, J. Eckert, S. Scudino，Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys, Wear, 382-383 (2017) 78-84.
15.Zhi Wang, Chunlin Chen, Sergey V. Ketov, Kazuto Akagi, Andrey A. Tsarkov, Yuichi Ikuhara, Dmitri V. Louzguine-Luzgin, Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid, Materials & Design, 156 (2018) 504-513.
16.W.W. Zhang, Y. Hu, Z. Wang*, C. Yang, G.Q. Zhang, K.G. Prashanth, C. Suryanarayana, A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgy, Materials Science and Engineering: A, Volume 734, 2018, Pages 34-41.
17.Zhang, W., Hu, Y., Zhang, G. and Wang, Z.*, 2017. Formation of Nanoscale Metallic Glassy Particle Reinforced Al-Based Composite Powders by High-Energy Milling. Metals, 7(10), p.425.
18.Q. Luo, G. Garbarino, B. Sun, D. Fan, Y. Zhang, Z. Wang, et al. Hierarchical densification and negative thermal expansion under high pressure in Ce-based metallic glass, Nature Communications, 6(2015), Article number:5703.
19.Louzguine-Luzgin, D. V., Zadoroshnyy, V. Y., Ketov, S. V., Wang, Z., Tsarkov, A. A., & Greer, A. L. . On room-temperature quasi-elastic mechanical behaviour of bulk metallic glasses. Acta Materialia, 129 (2017) 343-351.
20.J. He, N. Mattern, J. Tan, J.Z. Zhao, I. Kaban, Z. Wang, L. Ratke, D.H. Kim, W.T. Kim, J. Eckert, A bridge from monotectic alloys to liquid-phase-separated bulk metallic glasses: Design, microstructure and phase evolution, Acta Materialia, 61(2013) 2102-2112
21.Wei Jiao, Pan Liu, Huaijun Lin, Wei Zhou, Zhi Wang, Takeshi Fujita, Akihiko Hirata, Hai-Wen Li, Mingwei Chen, Tunable nanoporous metallic glasses fabricated by selective phase dissolution and passivation for ultrafast hydrogen uptake, Chemistry of Materials, 29 (2017), 10, 4478-4483
22.T Maity, KG Prashanth, ? Bal?i, JT Kim, T Sch?berl, Z Wang, J Eckert, Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics, International Journal of Plasticity, 2018
23.Maity T, Prashanth K G, ?zge Balc?, Z Wang, YD Jia, J Eckert. Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume[J]. Composites Part B Engineering, 2018.
24.G Geng, Z Yan, Y Hu, Z Wang, SV Ketov, J Eckert, Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses, Journal of Materials Research, 2018
25.Y Zhao, W Zhang, C Yang, D Zhang, Z Wang, Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al–Cu–Mn–Fe alloys, Journal of Materials Research 33(2018) (8), 898-911
26.Zhao, Chao, Weiwen Zhang, Zhi Wang, Daoxi Li, Zongqiang Luo, Chao Yang, and Datong Zhang. "Improving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium." Materials 10, no. 9 (2017): 1038.
27.K. G. Prashanth, S. Scudino, H. J. Klauss, K. B. Surreddi, L. Loeber, Z. Wang, A. K. Chaubey, U. Kuehn, J. Eckert, Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment, Materials Science and Engineering A, 590 (2014) 153-160.
28.A. Inoue, Z. Wang, D.V. Louzguine-Luzgin, Y. Han, F.L. Kong, E. Shalaan, F. Al-Marzouki,Effect of high-order multicomponent on formation and properties of Zr-based bulk glassy alloys, Journal of Alloys and Compounds, 638, (2015) 197-203
29.K. Prashanth, B. Debalina, Z. Wang, P. Gostin, A. Gebert, M. Calin, U. Kühn, M. Kamaraj, S. Scudino, J. Eckert. Tribological and corrosion properties of Al–12Si produced by selective laser melting, Journal of Materials Research 29 (2014) 2044-2054.
30.D.V. Louzguine-Luzgin, S.V. Ketov, Z. Wang, M.J. Miyama, A.A. Tsarkov, A.Y. Churyumov, Plastic deformation studies of Zr-based bulk metallic glassy samples with a low aspect ratio, Materials Science and Engineering: A, 616 (2014) 288-296.
31.D. Markó, K. G. Prashanth, S. Scudino, Z. Wang, N. Ellendt, V. Uhlenwinkel, J. Eckert, Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading, Journal of Alloys and Compounds, 615, (2014) S382-S385.
32.A.K. Chaubey, P.K. Gokuldoss, Z. Wang, S. Scudino, N.K. Mukhopadhyay, J. Eckert, Effect of particle size on microstructure and mechanical properties of al-based composite reinforced with 10 vol.% mechanically alloyed mg-7.4%al particles, Technologies, 4(4), (2016) 1-8.
33.K.G. Prashanth, R. Damodaram, S. Scudino, Z. Wang, K. Prasad Rao, J. Eckert, Friction welding of Al–12Si parts produced by selective laser melting, Materials Design, 57 (2014) 632-637.
34.K.K. Song, S. Pauly, Z. Wang, U. Kuehn, J. Eckert, Effect of TaW particles on the microstructure and mechanical properties of metastable Cu47.5Zr47.5Al5 alloys, Materials Science and Engineering A, 587 (2013), 372-380
35.J. Tan, F.S. Pan, Y. Zhang, Z. Wang, M. Stoica, B.A. Sun, U. Kuehn, J. Eckert, Effect of Fe addition on glass forming ability and mechanical properties in ZrCoAl(Fe) bulk metallic glasses, Materials Science and Engineering A 539 (2012), 124-127
36.Meng, F., Wang, Z., Zhao, Y., Zhang, D., & Zhang, W. Microstructures and Properties Evolution of Al-Cu-Mn Alloy with Addition of Vanadium. Metals 7.1 (2016): 10.
37.J. Ding, A. Inoue, Y. Han, F.L. Kong, S.L. Zhu, Z. Wang, E. Shalaan, F. Al-Marzouki, High entropy effect on structure and properties of (Fe,Co,Ni,Cr)-B amorphous alloys, Journal of Alloys and Compounds, 696 (2017) 345–352.
38.张冠群，王智*，胡愿，张卫文，李元元，高能球磨Ti55.5Cu18.5Ni17.5Al8.5合金非晶化研究[J]. 稀有金属材料与工程, 2018(5).
39. 张卫文，王智，罗宗强，李元元，2024/3003铝合金的高温退火研究，金属热处理，134(2009)，921-924
40. 王智，张卫文，郑小平，王郡文，李元元，内浇包熔体温度对7075/6009复合板材组织性能的影响，锻压技术，34(2009)，75-79

学术交流：
国际会议
1.Z. Wang, International Symposium on Metastable Amorphous and Nanostructured Materials 2018 (ISMANAM – 2018) (July 1-6) Roma, Italy (邀请报告+分会主席)
2.Z. Wang, International Symposium on Metastable Amorphous and Nanostructured Materials 2016 (ISMANAM – 2016) (July 3-8) Nara, Japan (邀请报告+分会主席)
3.Z. Wang, EMN MEETING ON Metallic Glasses, Energy Materials Nanotechnology, (September 12-16, 2016), (邀请报告)
4.Z. Wang, “Super-high strength aluminum alloys from metallic glassy precursors” EMN Meeting on Metallic Glasses, Energy Materials Nanotechnology, (September 12-16, 2016) Kuala Lumpur, Malaysia, (邀请报告)
5.Z. Wang, R. T. Qu（报告人）, B. A. Sun, Louzguine Luzgin, M. W. Chen, Z. F. Zhang, J. Eckert, “Hybrid nanostructured aluminum alloy with high strength” 15th International Conference on Aluminium Alloys (ICAA15-2016) (June 12-16) Chongqing, China,(邀请报告)
6.Z. Wang, “Reaching Super-high Strength in Aluminum alloys Based on the Confinement Effect” EMN Meeting on Alloys and Compounds, Energy Materials Nanotechnology, (October 10-14, 2016) Melbourne,Australia, (邀请报告)
7.王智，2017亚稳态新材料青年科学家研讨会，2017年8月，中国，昆明, (邀请报告)
8.王智，2018中国材料研讨会，2018年7月，中国，厦门，(邀请报告+分会主席)
9.王智，2017 特种粉末冶金及复合材料制备/加工第二届学术会议,2017年，中国，长沙, (邀请报告+分会主席)
10.Z. Wang, S.V. Ketov, D.V. Louzguine-Luzgin and J.H. Perepezko, The AIMR International Symposium 2016 (February 22-24), Sendai, Japan
11.Z. Wang, S.V. Ketov and D.V. Louzguine-Luzgin, International Symposium on Metastable Amorphous and Nanostructured Materials 2015 (ISMANAM – 2015) (July 12-17) Paris, France
12.Z. Wang, S. Scudino, D.M. Louzguine and J. Eckert, The AIMR International Symposium 2015 (February 16-19), Sendai, Japan
13.Z. Wang, S. Scudino, and D.M. Louzguine, 2nd International Symposium on the Functionality of Organized Nanostructures (FON ’14) (November 26-28) Tokyo, Japan
14.Z. Wang, S. Scudino, K. G. Prashanth, K. B. Surreddi, W.W. Zhang and J. Eckert, Poster at International Symposium on Metastable Amorphous and Nanostructured Materials 2013 (ISMANAM – 2013) (July 1-5) Torino, Italy
15.Z. Wang, K. G. Prashanth, S. Scudino, J. He, W.W. Zhang, Y.Y. Li and J. Eckert, Presented at International Symposium on Metastable Amorphous and Nanostructured Materials 2012 (ISMANAM – 2012) (June 18-22) Moscow, Russia
16.D. V. Louzguine-Luzgin, S. V. Ketov, Z. Wang and M. J. Miyama, Amorphous and Nanostructured Materials (ISMANAM 2015) July 13-17, 2015, Paris, France. Keynote Lecture.
17.K. G. Prashanth, S. Scudino, L. L?ber, Z. Wang, U. Kuehn, J. Eckert, The 8th Pacific Rim International Congress on Advanced Materials and Processing, (August 4-9, 2013) Waikoloa, Hawaii
18.K.G. Prashanth, Z. Wang, S. Scudino, D. J. Soredelet and J. Eckert, International Conference on Aluminium Alloys 13 – 2012 (ICAA13 – 2012) (June 3-7) Pittsburgh, Pennsylvania, USA
19.W. Zhang, Zheng, Q. Huang, Z. Wang and Y. Li, MRS International Materials Research Conference, June, 2008, Chongqing, China
20.Z. Wang, D.V. Louzguine-Luzgin, A Breakthrough of High-strength Aluminum alloy-Confinement Effect,日本金属学会2016年春季讲演会(2016年3月)，东京，日本
21.Z. Wang, S.V. Ketov, C.L. Chen, D.V. Louzguine-Luzgin, Role of constitutional elements with positive mixing enthalpy in glass-forming ability and mechanical properties of Zr-Cu-(Co)-Al metallic glasses,日本金属学会2015年秋季讲演会，福冈，日本
22.王智,张卫文，李元元, 原位生成TiC/6063 复合材料的凝固行为及其力学性能. 2010中国材料研讨会 (2010年6月)中国，长沙
23.王智, 张卫文，郑小平，王郡文，李元元，内浇包熔体温度对7075/6009复合板材组织性能的影响，2008中国材料研讨会 (2008年6月)中国，广州
24.K. G. Prashanth, Z. Wang, K. B. Surreddi, S. Scudino, D. J. Soredelet and J. Eckert, Consolidation of high strength Al84Gd6Ni7Co3 alloy, presented at 25th National Convention of Metallurgical and Materials Engineers (IEI) and National Seminar on Design and Development of Materials for Advanced Technologies, (DMAT – 2012), Jan 23-24, 2012 Varanasi, India
25.郑小平,张卫文,王智,黄强,李元元，塑性变形温度对7075/6009合金组织和性能的影响. 第十五届全国复合材料学术会议(2008年7月)中国，哈尔滨
26.王智，2017中国材料研讨会，2017年8月，中国，银川