朱萍玉 博士、教授、硕士生导师
研究领域：先进传感技术、智能制造与智能维护
办公地点：工程实验北楼509
办公电话：
电子邮箱: pyzhu@gzhu.edu.cn

个人简介：
朱萍玉：研究方向主要包括先进传感技术、智能制造与智能维护。担任中国振动学会机械动力学学会常务理事，广州市仪器仪表学会副理事长，广东省机械工程学会设备与维修工程分会秘书长等学术兼职。先后主持和参与国家重点研发项目、国家863计划项目、国家自然科学基金项目、广东省和广州市等科研项目30余项。获中国高校自然科学奖二等奖2项，湖南省科技进步三等奖等奖项。合作出版著作1部，教材1部，发表相关学术论文100多篇，获国家发明专利10项。接受与培养硕士生近40人。

教育背景:
◆1999-2003 中南大学 机械设计及理论 博士
◆1996-1999 河南理工大学 机械制造及其自动化 硕士
◆1990-1994 湖南科技大学 机械设计及制造 学士
职业经历:
1.学术工作经历
2009/06至2011/09, 清华大学与黄河水利委员会黄河水利科学研究院联合博士后
2004/03至2006/06, 天津大学, 仪器科学与技术学科, 博士后
2.海外工作经历
2018/07-2018/09，瑞士洛桑联邦理工学院，电子系，访问研究
2015/07-2016/07，瑞士洛桑联邦理工学院，电子系，国家公派访问研究
2007/06-2008/07，加拿大渥太华大学，机械系，博士后
2006/06-2007/06，加拿大渥太华大学，电子系，国家公派访问研究

教授课程:
《测试技术》、《传感器》、《无损检测技术》、《故障诊断》
科研服务:
近年主持的研究项目
(1) 国家重点研发计划项目, 大型海上风电机组叶片测试技术研究及测试系统研制, 2018YFB**, 2019-2021,子项目负责人, 在研,
(2) 国家自然科学基金项目, 光纤传感器用于切削颤振监测的关键技术研究, **, 2012/01-2014/12, 主持, 结题
(3) 企业委托, 基于光纤传感器的风电叶片强度测试技术研究, 2019-2020, 在研, 主持
(4) 企业委托, 碳纤维风机叶片静载试验中光纤传感器与应变片的对比试验，2018,结题
(5) 广东省科技计划项目,CFRP层合板内光纤传感器自动铺设工艺及装置研究, 2016A, 2016.1-2018.12, 主持, 结题
(6) 广州市科技计划项目, FBG用于CFRP层合板加工缺陷监测关键技术研究, 2，2016.4-2019.3，主持, 结题
(7) 广东省科技计划项目, GNSS/INS高速铁路轨道几何状态精密测量系统研制及其产业化, 2015B, 2015.04-2017.4，主持, 结题
研究成果：
1.获奖及荣誉
(1)指导学生获得2018中国(国际)传感器创新创业大赛二等奖。
(2)指导学生获得2016中国(国际)传感器创新创业大赛三等奖。
2.近5年论著目录（专利）
授权发明专利
(1) 朱萍玉,孙孝鹏,王野天,李永敬,谢啸博，碳纤维预浸料封装的分布式温度-应变传感器及制作方法, 2019.12.20，中国，ZL6.1
(2) 朱萍玉,孙孝鹏,张文力,李永敬, 一种碳纤维预浸料表面自动铺贴光纤传感的装置和方法, 2018.7.31, 中国，ZL5X
(3) 朱萍玉,杨志超,申昊文,施维,张文力,李永敬，一种光纤光栅传感器贴片的粘贴装置，2017.10.10, 中国，ZL1.7
(4) 朱萍玉,申昊文,许沛胜,施维,杨志超,周超,张春良,一种王字形的光纤光栅传感器贴片, 2017.05.10, ZL8.2
(5) 朱萍玉,许沛胜,申昊文,施维, 一种检测水平轴或梁应变的光纤光栅传感器快速粘贴器, 2016.07.06, 中国, ZL0.8
3.近期发表的期刊文章
(1) Pingyu Zhu, Zheng Liu, Xuebin Feng, Jiang Wu, Hongjie Xie, Mengjiao Huang, Marcelo A. Soto. Monitoring Strain Concentration at Fixtures of Wind Turbine Blades Using Fibre Bragg Grating Sensors. Advances in Asset Management and Condition Monitoring: COMADEM 2019, September, Huddersfield, UK.
(2) Pingyu Zhu, Jiang Wu, Mengjiao Huang, Xuebin Feng, Hang Deng, Hongjie Xie, Marcelo A. Soto. Alternating strain response of fibre Bragg grating sensors embedded into carbon fibre composites for wind blade health monitoring. SPIE, EWOFS19, August 28, Cyprus. Proceedings Volume 11199, Seventh European Workshop on Optical Fibre Sensors, 2019, Limssol, Cyprus. doi.org/10.1117/12.**.
(3) Pingyu Zhu, Wang Yetian, Wang Shuaibin, Marcelo A. Soto. Measuring the Two-Dimensional Temperature Profile of Carbon Fiber Reinforced Polymers During Drilling Using Distributed Fiber Sensing. IEEE/OSAJournal of Lightwave Technology,2019,37(18):4687-4696.(SCI)
(4) Zhu Pingyu, Jiang Wu, Huang Mengjiao, Wang Yetian, Pan Liu, Soto Marcelo A. Reducing Residual Strain in Fiber Bragg Grating Temperature Sensors Embedded in Carbon Fiber Reinforced Polymers. IEEE/OSA Journal of Lightwave Technology, 2019,37(18):4650-4656.
Zhu, P., Wu, J., Huang, M., Wang, Y., Liu, P., and Soto, M.A, Reducing Residual Strain in Fiber Bragg Grating Temperature Sensors Embedded in Carbon Fiber Reinforced Polymers, in press J. Lightwave Technol. 2019, doi: 10.1109/JLT.2019.** (SCI)
(5) Pingyu Zhu, Xiaobo Xie, Xiaopeng Sun, Marcelo A. Soto. Distributed modular temperature-strain sensor based on optical ?ber embedded in laminated composites. Composites Part B 168, 267–273 (2019). (SCI)
(6) Pingyu Zhu, Yongjing Li, Yetian Wang, Shuaibin Wang, Wei Wei, Marcelo A. Soto. Monitoring of the Drilling-Induced Temperature Profile in CFRP Plates Using Distributed Optical Fiber Sensing. 26th International Conference on Optical Fiber Sensors, OSA 2018, Sep.26-30, Lausanne, Switzerland.
(7) Pingyu Zhu, Zhen Lu, Shuaibin Wang, Yongjing Li, Marcelo A.Soto. 3D Ultrasound Imaging of Drilling-Induced Delamination in Composite Laminates. 7th Asia-Pacific Workshop on Structural Health Monitoring November 12-15, 2018 Hong Kong SAR, P.R. China.
(8) Pingyu Zhu, Yetian Wang, Mengjiao Huang, Marcelo A. Soto. Investigation of Temperature Performance of Silica Gel Covered Flexible Array Optical Fiber Temperature Probe. 7th Asia-Pacific Workshop on Structural Health Monitoring November 12-15, 2018 Hong Kong SAR, P.R. China.
(9) Zhu P., Li Y., Wang Y., Soto M.A. (2019) High Resolution Drilling-Induced Temperature Mapping of CFRP Laminates Using a Fully Distributed Optical Fiber Sensor. In: Fernandez Del Rincon A., Viadero Rueda F., Chaari F., Zimroz R., Haddar M. (eds) Advances in Condition Monitoring of Machinery in Non-Stationary Operations. CMMNO 2018. Applied Condition Monitoring, vol 15. Springer, Cham DOI https://doi.org/10.1007/978-3-030-11220-2_5
(10) Pingyu Zhu, Chunliang Zhang, Xia Yue, Shifeng Yang. Study on the effect of thermal loads on ballastless track switch rail in high-speed railway using FBG. Advances in Condition Monitoring of Machinery in Non-Stationary Operations-Proceedings of the Sixth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June, 2018, Santander, Spain.
(11) 朱萍玉,李永敬,孙孝鹏,李东炜.纤维增强复合材料制孔分层缺陷检测与评价技术研究进展.中国测试,2018,44(1):1-8.
(12) 李永敬,朱萍玉,孙孝鹏,谢啸博,王野天.基于形状模板匹配的冲压件外形缺陷检测算法研究广州大学学报,2017,16(5):62-66.
(13) Pingyu Zhu, Xiaopeng Sun, Yongjing Li, Marcelo A. Soto. Smart design for temperature-strain measurement using distributed fiber-optic embedded in laminated composites. The 9^th International Syposium on NDT in Aerospace, 8-10 November, 2017, Xiamen，2017年11月
(14) Pingyu Zhu, Yongjing Li, Yetian Wang, Xiaopeng Sun, Marcelo A. Soto. Characterization of dynamic strain induced by drilling carbon fiber reinforced polymers using optical frequency-domain reflectometry. International Conference on Optical Instruments and Technology 2017: Advanced Optical Sensor and Applications, OIT2017, Beijing，2017年10月.
(15) 朱萍玉,李永敬,申昊文,朱金. 一种具有温度补偿的“王”字形FBG应变传感器的研制,仪表技术与传感器,2017(8):15-18.
(16) Pingyu Zhu, Zhichao Yang, Wei Shi, Yongjing Li. Delamination monitoring using low frequency stress wave for laminated composites. 14th IMEKO TC10 Work shop Technical Diagnostics New Perspectives in Measurements, Tools and Techniques for system’s reliability, maintainability and safety, Milan, Italy, June 27-28, 2016.
(17) P.Y. Zhu, Z.C. Yang, Y.J. Li and Wei Shi. Dynamic strain monitoring of composite laminates during drilling using fiber Bragg grating and strain gauge sensors.In: ECCM17, 17th European conference on composite materials, 27-30 June 2016, Munich, Germany.