个人简介：
程方，教授


研究领域：
精密工程，表面计量，几何量测量，机器视觉，人工智能瑕疵检测

学习工作经历：
1999年9月-2010年6月：合肥工业大学，博士毕业
2010年6月-9月：台湾大学博士后
2010年9月-2013年2月：新加坡南洋理工大学博士后
2013年3月至今：新加坡科学技术研究局，先进再制造技术中心，当前职务Group Manager
2018年3月至今：华侨大学****，“闽江****”奖励计划讲座教授


主持或参加的科研项目：
Leading Inspection projects in Smart Manufacturing Joint Lab Program, Singapore (Sep 2017 - . Funding: S$6.2 million) “智能制造合作实验室”计划 （https://www.a-star.edu.sg/News-and-Events/A-STAR-INNOVATE/Index/New-Smart-Manufacturing-Joint-Lab.aspx）
Measurement Uncertainty Analysis Expert System 测量不确定度专家系统 (Apr 2014 – May 2015. Funding: S$260,000)
Automated Surface Inspection System 自动表面检测系统 (Apr 2013 – Apr 2015. Funding: S$540,000)
Automated Surface Roughness Measurement System 自动在线表面粗糙度测量系统 (May 2013 – May 2017. Funding: S$420,000)


主要论著与学术论文：
PUBLICATIONS
Journal Papers

1. Kuang-Chao Fan, Wang Weili, and Cheng Fang (2005) “Innovative design of a new bridge,” Journal of Chinese Mechanical Engineering. (EI) (in press).
2. Wang Weili, Fan Kuang-Chao, Cheng Fang (2006), Parameter Measurement of New Type XY Coplanar Nanopositioner. Machinery, 44(2): pp. 64-67. (in Chinese) (Cited by 3)
3. K.C. Fan, Y.T. Fei, X.F. Yu, Y.J. Chen, W.L. Wang, F. Cheng and Y.S. Liu (2006) “Development of a low cost Micro-CMM for 3D Micro/nano Measurements,” Measurement Science & Technology, Vol. 17, pp. 524-532. (SCI, IF: 1.118) (Cited by 74)
4. Fan, K.C., Cheng, F., and Chen, Y.J. (2006) “Nanopositioning Control on a Commercial Linear Stage by Software Error Compensation,” Nanotechnology and Precision Engineering (China), Vol. 4, No. 1, pp. 1-9. (EI) (Cited by 24)
5. Cheng Fang (2006)，Subdivision of Grating Signal in Nanometer Measurement, Industrial Measurement, Vol.16. No.3: 15-17. (in Chinese) (Cited by 2)
6. Chen Yejin, K. C. Fan, Liu Yusheng and Cheng Fang (2007) “A high precision focus probe for the quality assessment of grating pitch,” Key Engineering Material, Vol. 339, pp. 200-205. (Cited by 1)
7. Fan Kuang-Chao, Cheng Fang, Wang Weili, et al (2010).A scanning contact probe for micro CMM. Meas. Sci. Technol. 21 (2010) 054002 (Cited by 24)
8. Cheng Fang, Fan Kuang-Chao and Fei Ye-tai (2010)，Measurement of Pretravel Distance of a Touch Probe for Nano-CMM.Nanotechnology and Precision Engineering, Vol.8, No.2：107-112. (EI) (Cited by 5)
9. Cheng Fang, Fei Ye-tai (2010)，Trigger Control of a Touch Probe for Nano-CMM, Optics and Precision Engineering, 18(12): 1095-1101. (Cited by 3)
10. Fan Kuang-Chao, Cheng Fang (2011), “The System and Mechatronics of a Pagoda Type Micro-CMM”, Special Issue on Precision Micro- and Nano-Metrology for Nanomanufacturing, International Journal of Nanomanufacturing , Int. J. Nanomanufacturing, Vol. 8, Nos. 1/2 (Cited by 14)
11. Cheng Fang, Fan Kuang-Chao (2012), “A Linear Diffraction Grating Interferometer with High Alignment Tolerance and High Accuracy”, Applied Optics. Vol. 50, Issue 22, pp. 4550-4556 (Cited by 34)
12. Fang Cheng, Kuang-Chao Fan, Jinwei Miao, Bai-Kun Li and Hung-Yu Wang, A BPNN-PID based long-stroke nanopositioning control scheme driven by ultrasonic motor”, Precision Engineering 36 (2012) 485– 493 (Cited by 14)
13. Mei Zhang, Fang Cheng, Guihua Li, “Modeling CMM Dynamic Measuring Error Based on the 3B-Spline Orthogonal Projection Partial Least Squares”, Advances in information Sciences and Service Sciences(AISS), Vol. 4 (15), 2012: 242-248 (Cited by 1)
14. Cheng Fang and David Lee Butler, An innovative method for coordinate measuring machine one-dimensional self-calibration with simplified experimental process, Review of Scientific Instruments, 84, 055103 (2013) 84(5), 2013 (Cited by 3)
15. Fu Shaowei, Cheng Fang*, Tegoeh Tjajowidodo, A Non-Contact Measuring System for In-Situ Surface Characterization Based on Laser Confocal Microscopy, Sensors 2018, 18(8),2657, 2018
16. Yu Qing, Zhang Kun, Cui Changcai, Zhou Ruiran, Cheng Fang, Method of thickness measurement for transparent specimens with chromatic confocal microscopy, Applied Optics 57(33):9722, 2018
17. Yu Qing, Zhang Kun, Cui Changcai, Zhou Ruiran, Cheng Fang, Calibration of a Chromatic Confocal Microscope for Measuring a Colored Specimen, IEEE Photonics Journal 10 (6): **, 2018
Conference Papers
1. Kuang-Chao Fan, Wang Weili, and Cheng Fang (2004.8), “Innovative design of a new CMM structure”, Proc. Of the International Symposium of Mechanical Measurement (ISPMM2004), August 24~28, Beijing, China. (Cited by 1)
2. Fan Kuang-chao, Chen Ye-jin, and Cheng Fang (2004.8), “A Study on Digital Subdivision of Linear Optical Encoder for Nanopositioning”, Proc.of the ISIST’2004, XI’AN, China. (Cited by 4)
3. Fan Kuang-chao, Chen Ye-jin, Cheng Fang, (2004), “A Study on Nano positioning and feedback control system in large-scale”, Proc. Of the International Symposium of Mechanical Measurement (ISPMM2004), August 24~28, Beijing, China. (Cited by 2)
4. Yejin Chen, K.C. Fan, Yusheng Liu, Fang Cheng (2008.8), A High precision focus probe for the quality assessment of grating pitch, Proceedings of ASPEN’2005, Shenzhen, Vol. 1, 2005, p. 374-378.
5. Cheng, F., Fan, K.C. and Fei. Y.T., “A Robust control scheme of nanopositioning drive by ultrasonic motor,” Proc. ISPMM, Paper No. D2-1, Hefei, China.（EI）(Cited by 6)
6. Cheng Fang and Fan Kuang-Chao (2009.11). An Improved Design of the Linear Diffraction Grating Interferometer, Proceedings of ASPEN2009, Kitakyushu, Japan. (Cited by 1)
7. Kuang-Chao Fan, Cheng Fang, LDGI Signal Subdivision by Soft Computing for Nanomeasurement, accepted by ISPEMI2010, Hangzhou, China, 2010 (Cited by 1)
8. Fan Kuang-Chao and Cheng Fang, “The system and mechatronics of a developed Micro-CMM,” Invited paper, IFSM 2010, Singapore, Sept. 6 to 8, 2010.
9. Cheng Fang, Fan Kuang-Chao (2011), “High-resolution Angle Measurement based on Michelson Interferometry” ,ICOPEN2011, Singapore (Cited by 4)
10. Cheng Fang, David Lee Butler, Fan Kuang-Chao (2011), “Measurement of microchannels inside transparent substrate based on confocal microscopy,” ISPEMI2011, Lijiang, China
11. Kuang-Chao Fan, Jin-Wei Miao, Wei Gong, You-Liang Zhang, Fang Cheng, “High Precision Measurement System Based on Coplanar XY-stage”, ISPEMI2011, Lijiang, China. (Cited by 1)
12. Rui-Jun Li, Kuang-Chao Fan, Sheng Tao, Jian-Zhao Qian, Qiang-Xian Huang, Fang Cheng, “Design of an Analogue Contact Probe for Nano-Coordinate Measurement Machines (CMM),” ISPEMI2011, Lijiang, China. (Cited by 6)
13. Fan Kuang-Chao, Chung Yi-Cheng, Chang Fang and Wang Tsung-Hang, A Miniature Three-angle Sensor for the Accuracy Improvement of Machine Tools, Proceedings of ICMT2011, Nov.2011, Australia
14. Fan Kuang-Chao, Zhang Youliang, Miao Jinwei and Cheng Fang, “Error Compensation of Linear Diffraction Grating Interferometers due to Angular Error of Moving Stage”, Proceedings of 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Jul.2012, Taiwan.
15. Cheng Fang, Fu Shaowei, Research on Optical Measurement for Additive Manufacturing Surfaces, Proceedings of ICOPEN 2015, Chengdu, China.
Other Publications
1. Fan Kuang-Chao, Cheng Fang. Probe Technologies for Micro/Nano Measurements, Cutting Edge Nanotechnology, IN-TECH, 2009.
2. Invited talk: Enhanced Industrial Measurement assisted by Augmented Reality”, 13th International Symposium on Measurement Technology and Intelligent Instruments (ISMPII2017), Xi’an, China, 2017

联系方式：
联系电话：+46（中国），+
电子邮箱：chf19chf19@hotmail.com