姓名：张玲
职称：教授
学习工作经历
2014.12－今，重庆大学，********
2007.07－2014.12，日本国家材料研究所（NIMS），元素战略材料中心，博士后，
2001.09－2007.04，北京科技大学，材料科学与工程学院，博士（硕博一贯制），
1997.09－2001.07，北京科技大学，材料科学与工程学院，学士
学术专长
长期以钢铁等金属材料为主，利用原位实时分析等新技术研究微纳尺度条件下变形过程中组织变化规律（如位错、晶界、固溶元素及析出相等各种晶格缺陷的演变）及其对局部机械性能的影响，力求建立宏观材料强韧性设计的指导原则。
主要研究方向
利用先进分析手段解析现有材料中微量元素及合金元素对相稳定性及力学性能的影响；基由纳米到微米级别多尺度设计和控制界面及位错等组织缺陷和合金元素的偏析等异质结构开发具有崭新力学性能的钢铁材料、钛合金和镁铝合金等构造功能材料。
科研项目
NSFC面上项目1项，主持，2017-2020
NSFC面上项目1项，参研
科技部国家重点专项，骨干
国家基金委主任基金1项，主持，已结题
论文及专著
2017年
[1] L.Zhang, Z. Chen, Y.H. Wang, G.Q. Ma, T.L. Huang, G.L. Wu, D. Juul Jensen. Fabrication interstitial-free steel with simultaneous high strength and good ductility with homogeneous layer and lamella structure. Scripta Mater., 141(2017), 111-114.
[2] L. Xie, T.L. Huang, Y.H. Wang, L. Zhang, G.L. Wu, N. Tsuji and X. Huang. Structural refinement and property optimization in an Fe-23Cr-8.5Ni duplex stainless steel. IOP Conf. Series: Materials Science and Engineering, 219 (2017) 012045.
[3] L. Zhang, X.J. Jiang, Y.H. Wang, Q. Chen, Z. Chen, Y.H. Zhang, T.L. Huang, G.L. Wu. Heterogeneous multi-layered IF steel with simultaneous high strength and good ductility. IOP Conf. Series: Materials Science and Engineering, 219 (2017) 012052
2016年
[1] D. F. Carpeno, T. Ohmura, L. Zhang, et al. Softening and compressive twinning in nanosecond ultraviolet pulsed laser-treated Ti6Al4V. Scripta Materialia. 2016; 113:139-144.
[2] Yi-Chieh Hsieh, Ling Zhang, Tsai-Fu Chung, Yu-Ting Tsai, Jer-RenYang*, Takahito Ohmura and Takuya Suzuki, In-situ transmission electron microscopy investigation of the deformation behavior of spinodal nanostructured δ-ferrite in a duplex stainless steel, Scripta Mater. 2016; 125: 44-48
[3] J. Xia, L. Yang, R.T. Wu, Y.C. Zhou, L. Zhang, B.B. Yin, Y.G. Wei，On the resistance of rare earth oxide-doped YSZ to high temperature volcanic ash attack，Surface and Coatings Technology, 2016; 307: 534-541
2015年
[1] D. F. Carpeno, T. Ohmura, L. Zhang, et al. Nanomechanical and in situ tem characterization of boron carbide thin films on helium implanted substrates: Delamination, real-time cracking and substrate buckling. Materials Science and Engineering A. 2015; 639:54-64.
[2] K.-j. Duan, L. Zhang, X.-z. Yuan, et al. Effect of an upward magnetic field on nanosized sulfide precipitation in ultra-low carbon steel. International Journal of Minerals, Metallurgy, and Materials. 2015; 22:714-720.
[3] X. Min, S. Emura, L. Zhang, et al. Improvement of strength–ductility tradeoff in β titanium alloy through pre-strain induced twins combined with brittle ω phase. Materials Science and Engineering: A. 2015; 646:279-287.
2015年以前代表作
[1] *L. Zhang, T. Ohmura，Plasticity initiation and evolution during nanoindentation of an iron–3% silicon crystal. Physical Review Letters, 2014. 112(14): p. 145504.
[2] *L. Zhang, N. Sekido, T. Ohmura, Real time correlation between flow stress and dislocation density in steel during deformation. Materials Science and Engineering: A, 2014. 611: p. 188-193.
[3] *L. Zhang, T. Ohmura, K. Tsuzaki, Application of nanoindentation technique in martensitic structures, in: J. Nemecek (Ed.) nanoindentation in materials science, Publisher: InTech, 2012. pages: 308, p. 109-130,
[4] *L. Zhang, T. Ohmura, K. Seikido, K. Nakajima, T. Hara, K. Tsuzaki, Dislocation character transition and related mechanical response in a body-entered cubic single crystal. Scripta Materialia, 2012. 67(4): p. 388-391.
[5] *T. Ohmura, L. Zhang, K. Sekido, K. Tsuzaki, Effects of lattice defects on indentation-induced plasticity initiation behavior in metals. Journal of Materials Research, 2012. 27(13): p. 1742-1749.
[6] *X. H. Min, L. Zhang, K. Sekido, T. Ohmura, S. Emura, K. Tsuchiya, K. Tsuzaki, Strength evaluation of α and β phases by nanoindentation in Ti–15Mo alloys with Fe and Al addition. Materials Science and Technology, 2012. 28(3): p. 342-347.
[7] *L. Zhang, T. Ohmura, K. Seikido, K. Nakajima, T. Hara, K. Tsuzaki, Direct observation of plastic deformation in iron3% silicon single crystal by in situ nanoindentation in transmission electron microscopy. Scripta Materialia, 2011. 64(9): p. 919-922.
[8] *K. Sekido, T. Ohmura, L. Zhang, T. Hara, K. Tsuzaki, The effect of interstitial carbon on the initiation of plastic deformation of steels. Materials Science and Engineering: A, 2011. 530: p. 396-401.
[9] *L. Zhang, T. Ohmura, A. Shibata, K. Tsuzaki, Characterization of local deformation behavior of Fe–Ni lenticular martensite by nanoindentation. Materials Science and Engineering: A, 2010. 527(7-8): p. 1869-1874.
[10] *Q. S. Mei, L. Zhang, K. Tsuchiya, H. Gao, T. Ohmura and K. Tsuzaki, Grain size dependence of the elastic modulus in nanostructured NiTi. Scripta Materialia, 2010. 63(10): p. 977-980.
科研团队
黄晓旭老师团队