u 个人简介
胡励，博士，副教授。2010年7月毕业于哈尔滨工业大学材料科学与工程学院，获材料成型及控制工程专业工学学士学位，2017年6月毕业于哈尔滨工程大学材料科学与化学工程学院（硕博连读），获材料科学与工程专业工学博士学位，2017年7月至今任重庆理工大学材料科学与工程学院教师。在国内外重要刊物如《Materials Science and Engineering：A》、《Intermetallics》、《Progress in Natural Science: Materials International》、《Metals and Materials International》、《Materials Research Bulletin》等发表SCI收录学术期刊19篇，发表论文共被他人引用200余次（截至到2018.12）。

u 研究领域
金属材料剧烈塑性变形；轻合金特种塑性加工；多尺度塑性变形数值模拟

u 承担的主要项目
[1] 双峰分离非基面织构AZ31镁合金板材的室温轧制变形机理多尺度研究，国家自然科学基金青年基金项目，2019/01-2021/12，25万元 主持
[2] 基于晶体塑性的双峰分离非基面织构AZ31镁合金板材室温变形机理及模拟研究，重庆市教委基础/应用基础研究项目，2018/10-2021/09，5万元 主持
[3] 析出相对第三代铝锂合金热机械加工组织织构演变的作用规律及影响机制研究，国家自然科学基金面上项目，2019/01-2022/12，60万元 参与
[4] 轻型直升机农林喷洒系统开发与应用示范，重庆市技术创新与应用示范专项产业类重点研发项目，2018/03-2019/10，100万元 参与
[5]基于精确塑性成形成性的异种形状记忆合金复合管微观结构演变机理及界面结合机制，国家自然科学基金面上项目，2015/01-2018/12，83万元 参与
[6]镍钛基形状记忆合金管接头等温精密塑性成形机理及相关性能研究, 国家自然科学基金青年基金项目，2014/01-2016/12，25万元 参与

u 代表性成果
(1) Li Hu^*, Shuyong Jiang, Tao Zhou, Jian Tu, Laixin Shi, Qiang Chen, Mingbo Yang, Multiscale Modeling of Polycrystalline NiTi Shape Memory Alloy under Various Plastic Deformation Conditions by Coupling Microstructure Evolution and Macroscopic Mechanical Response, Materials, 2017, 10(10): 1172.
(2) Li Hu, Shuyong Jiang^*, Siwei Liu, Yanqiu Zhang, Yanan Zhao, Chengzhi Zhao, Transformation twinning and deformation twinning of NiTi shape memory alloy, Materials Science and Engineering: A, 2016, 660: 1-10.
(3) Li Hu, Shuyong Jiang^*, Yanqiu Zhang, Yanan Zhao, Siwei Liu, Chengzhi Zhao, Multiple plastic deformation mechanisms of NiTi shape memory alloy based on local canning compression at various temperatures, Intermetallics, 2016, 70: 45-52.
(4) Li Hu, Shuyong Jiang^*, Yanqiu Zhang, Xiaoming Zhu, Yanan Zhao, Dong Sun, Influence of slip system combination models on crystal plasticity finite element simulation of NiTi shape memory alloy undergoing uniaxial compression, Progress in Natural Science: Materials International, 2017, 27(5): 598-605.
(5) Li Hu, Shuyong Jiang^*, Yanqiu Zhang, Dong Sun, Crystal plasticity finite element simulation of NiTi shape memory alloy based on representative volume element, Metals and Materials International, 2017, 23(6): 1075-1086.
(6) Li Hu, Shuyong Jiang^*, Yanqiu Zhang, A Combined Experimental-Numerical Approach for Investigating Texture Evolution of NiTi Shape Memory Alloy under Uniaxial Compression, Metals, 2017, 7(9): 356.
(7) Li Hu, Shuyong Jiang^*, Yanqiu Zhang, Role of Severe Plastic Deformation in Suppressing Formation of R Phase and Ni4Ti3 Precipitate of NiTi Shape Memory Alloy, Metals, 2017, 7(4): 145.
(8) Li Hu, Shuyong Jiang^*, Yanqiu Zhang, Xiaoming Zhu, Dong Sun, Texture evolution and inhomogeneous deformation of polycrystalline Cu based on crystal plasticity finite element method and particle swarm optimization algorithm, Journal of Central South University, 2017, 24(12): 2747-2756.
(9) Shuyong Jiang^*, Li Hu, Yanan Zhao, Yanqiu Zhang, Yulong Liang, Multiscale investigation of inhomogeneous plastic deformation of NiTi shape memory alloy based on local canning compression, Materials Science and Engineering: A, 2013, 569: 117?123.
(10) Shuyong Jiang^*, Li Hu, Yanqiu Zhang, Yulong Liang, Nanocrystallization and amorphization of NiTi shape memory alloy under severe plastic deformation based on local canning compression. Journal of Non-Crystalline Solids, 2013, 367: 23?29.
(11) Shuyong Jiang^*, Li Hu, Yanan Zhao, Yanqiu Zhang, Yulong Liang. Plastic yielding of NiTi shape memory alloy under local canning compression. Transactions of Nonferrous Metals Society of China, 2013, 23(10): 2905?2913.
(12) Yanqiu Zhang, Shuyong Jiang^*, Li Hu, Yulong Liang. Deformation mechanism of NiTi shape memory alloy subjected to severe plastic deformation at low temperature, Materials Science and Engineering: A, 2013, 559: 607-614.
(13) Shuyong Jiang^*, Junbo Yu, Li Hu, Yanqiu Zhang, Investigation on Deformation Mechanisms of NiTi Shape Memory Alloy Tube under Radial Loading, Metals, 2017, 7(7): 268.
(14) Yanqiu Zhang,Shuyong Jiang^*, Li Hu, Investigation of Dynamic Recrystallization of NiTi Shape Memory Alloy Subjected to Local Canning Compression, Metals, 2017, 7(6): 208.
(15) Yanqiu Zhang, Shuyong Jiang^*, Yulong Liang, Li Hu. Simulation of dynamic recrystallization of NiTi shape memory alloy during hot compression deformation based on cellular automaton, Computational Materials Science, 2013, 71: 124?134.
(16) Shuyong Jiang^*, Ming Tang, Yanan Zhao, Li Hu, Yanqiu Zhang, Yulong Liang, Crystallization of amorphous NiTi shape memory alloy fabricated by severe plastic deformation, Transactions of Nonferrous Metals Society of China, 2014, 24(6): 1758-1765.
(17) Shuyonn Jiang^*, Yanan Zhao, Yanqiu Zhang, Li Hu, Yulong Liang. Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy, Transactions of Nonferrous Metals Society of China, 2013, 23(12): 3658?3667.
(18) Yanqiu Zhang, Shuyong Jiang^*, Sibing Wang, Dong Sun, Li Hu, Influence of partial static recrystallization on microstructures and mechanical properties of NiTiFe shape memory alloy subjected to severe plastic deformation, Materials Research Bulletin, 2017, 88: 226–233.
(19) Shuyong Jiang^*, Yanqiu Zhang, Yanan Zhao, Siwei Liu, Li Hu, Chengzhi Zhao, Influence of Ni4Ti3 precipitates on phase transformation of NiTi shape memory alloy, Transactions of Nonferrous Metals Society of China, 2015, 25(12): 4063-4071.

u 联系方式
电话：**；E-mail：huli@cqut.edu.cn