张来启，博士，教授，博士生导师。
联系方式：；zhanglq@ustb.edu.cn
1999年7月在北京科技大学材料学院博士毕业，获材料学博士学位。2000年4月至2002年6月在中国科学院力学研究所材料工艺中心作博士后。2002年6月进入北京科技大学新金属材料材料国家重点实验室工作。作为国家公派访问于2010.11 -2011.11赴美国西弗吉尼亚大学从事研究工作。现为中国材料研究学会金属间化合物与非晶合金分会委员，中国材料研究学会金属间化合物学术委员会委员、秘书长。《新型工业化》特邀编委。
长期以来一直从事先进结构材料、传统材料的表面改性及其相关机理研究。在渗硼/渗金属、激光熔覆/合金化、热喷涂等表面改性涂层，难熔金属硅化物、高Nb-TiAl金属间化合物等高温结构材料，耐液锌腐蚀方面有系统工作。作为负责人、项目组成员和主要完成者曾先后承担和正在承担国家自然科学基金面上及重大项目、973、军工973、国防科学技术工业局军品配套、省部委、厂协横向课题等10多项科研项目。已发表学术论文100余篇，其中SCI收录65篇，EI收录87篇；做大会邀请报告8次；获中国有色金属工业科学技术奖1项；授权国家发明专利15项。
指导硕士研究生31人、博士生9人，目前已毕业27人(全部就业，大多在科研院所、高校、大型外企与国企工作)。

目前研究兴趣：
1．航空航天用新型难熔金属硅化物超高温结构材料；TiAl金属间化合物；
2．耐液态金属腐蚀材料；
3．新型耐高温、耐腐蚀多孔材料；
4．难变形材料的高温热变形行为；
5．先进可控电弧丝材熔覆、堆焊与3D打印；热喷涂；
6．材料的模拟计算。
主要论文代表作：
1Zhang Laiqi, Pan Kunming, Du Wei, Wang meng, Lin Junpin, Ni Xiaodong, Shang Haikun, Sun Jinghui. Intrinsic brittleness of Mo₅SiB₂and alloying effect on ductility studied by first-principles calculations. Intermetallics, 2014, 50: 79-85
2Zhang Lai-qi, Ma Xiang-ling, Ge Geng-wu, Hou Yong-ming, Zheng Jun-zi, Lin Jun-pin. Equal channel angular extrusion simulation of high-Nb containing beta-gamma TiAl alloys. Advances in Materials Science and Engineering,http://dx.doi.org/10.1155/2015 /285170
3Zhang Laiqi, Pan Kunming, Lin Junpin. Fracture toughness and fracture mechanisms in Mo₅SiB₂at ambient to elevated temperatures. Intermetallics, 2013, 38: 49-54
4Zhang Laiqi, Pan Kunming, Wang Jue, Lin Junpin. Spark plasma sintering synthesis of intermetallic T2 inthe Mo-Si-B system. Advanced Powder Technology, 2013, 24: 913-920
5Song L., Zhang L. Q., Xu X. J., Sun J., Lin J. P. Omega phase in as-cast high-Nb-containing TiAl alloy. Scripta Materialia, 2013, 68: 929-932
6Zeng H. J., Zhang L. Q., Lin J. P., Zhang S. J., Chen G. L. TiAlNb intermetallic compound coating prepared by high velocity oxy-fuel spraying. Surface and Coatings Technology, 2011, 206(1): 178-184
7Xin J J, Zhang L Q, Ge G W, Lin J P. Characterization of microstructure evolution in beta- gamma TiAl alloy containing high content of niobium using constitutive equation and power dissipation map. Materials & Design, 2016, 107: 406-415
8Pan K M, Zhang L Q, Wei S Z, Zhao Y. Dislocation climb in Mo₅SiB₂during high- temperature deformation. International Journal of Refractory Metals & Hard Materials, 2016, 61: 115-120
9Zeng H. J., Zhang L. Q., Lin J. P., He X. Y. Influence of Bond Coats on the Microstructure and Mechanical Behaviors of HVOF-Deposited TiAlNb Coatings. Journal of Thermal Spray Technology, 2012, 21(6): 1245-1256
10Yang Fan, Zhang Laiqi, Lin Junpin, Liang Yongfeng, He Yuehui, Shang Shunli, Liu Zi-Kui. Pore structure and gas permeability of high Nb-containing TiAl porous alloys by elemental powder metallurgy for microfiltration application. Intermetallics, 2013, 33: 2-7
11Pan Kunming, Zhang Laiqi, Wang Jue, Lin Junpin, Chen Guoliang. Oxygen removal from raw silicon powder by the HF-ethanol solution etching. Surface and Interface Analysis, 2013, 45: 955-961
12Ding Xian-Fei, Zhang Lai-Qi, Lin Jun-Pin, He Jian-Ping, Yin Jia, Chen Guo-Liang. Microstructure control and mechanical properties of directionally solidified TiAl-Nb alloys. Transactions of Nonferrous Metals Society of China (English Edition), 2012, 22(4): 747-753
13Sun Pengfei, Zhang Laiqi, Zhang Li,Lin Junpin. Improvement in the liquid zinc corrosion resistance of high Nb-TiAl alloys by pre-oxidation in a SiO₂-powder pack. Science China Technological Sciences, 2012, 55(2): 505-509
15Pan Kunming, Liu Wei, Zhang Laiqi, Wei Shizhong, You Long, Lin Junpin. Deformation behavior of Mo₅SiB₂at elevated temperatures. Materials Science & Engineering, 2015, A623: 124-132
14Ding X.F.,Lin J.P.,Zhang L.Q.,Su Y.Q., Chen G.L. Microstructural control of TiAl-Nb alloys by directional solidification. Acta Materialia, 2012, 60(2): 498-506

联系方式：；zhanglq@ustb.edu.cn.