人物简介

姓 名：杨树峰
职 务：教授/博士生导师
电子邮件： yangshufeng@ustb.edu.cn



办公电话： 传 真：
本科课程： 钢铁冶金学II
炉外精炼
特殊钢冶金
研究生课程：
科研方向： （1）钢中非夹杂物的控制；
（2）高温合金冶炼；
（3）炉外精炼。


个人简介
成就及业绩


2001.09-2005.07，西安建筑科技大学，本科
2005.09-2011.1，北京科技大学，硕博连读，博士
2011.02-2012.06，美国密苏里科技大学，博士后
2012.07-2015.07，北京科技大学副，讲师
2015.07-今， 北京科技大学，副教授
【主要学术成就】
主要从事洁净钢冶炼、钢中非金属夹杂物控制和高温合金冶炼等方面的研究。国家自然基金委优秀青年基金获得者，第一作者和通讯作者发表SCI收录论文40余篇，其中11篇发表在冶金类国际权威期刊《Metallurgical and Materials Transactions B》上，单篇文章被引最高46次。曾获教育部和天津市科技进步二等奖和第四届全国冶金高校院长奖。主持国家自然科学基金优秀青年基金项目1项、面上项目1项、青年项目1项，主持企业合作课题14项。目前兼任中国金属学会电冶金分会副秘书长。

代表性论著：
[1]Liu, Wei; Tang, Haiyan; Yang, Shufeng , et al Numerical Simulation of Slag Eye Formation and Slag Entrapment in a Bottom-Blown Argon-Stirred Ladle[J]. Metallurgical and Materials Transactions B, 2018, 49(5): 2681-2691.
[2]Zhou, Yutao; Yang, Shufeng; Li, Jingshe, Effects of Heat-Treatment Temperature on the Microstructure and Mechanical Properties of Steel by MgO Nanoparticle Additions[J]. MATERIALS, 2018, 11(9): 1707
[3]Wang L, Li J, Yang Shufeng , et al. Nucleation and Ostwald Growth of Particles in Fe-O-Al-Ca Melt[J]. Scientific reports, 2018, 8(1): 1135.
[4]Zhang X, Yang Shufeng , Liu C, et al. Effect of Heat-Treatment Temperature on the Interfacial Reaction Between Oxide Inclusions and Si-Mn Killed Steel[J]. JOM, 2018, 70(6),958-962
[5]Zhang X, Yang S , Liu C , et al. Interfacial reaction between oxide inclusion and steel matrix deoxidized by Si and Mn at 1473 K[J]. Journal of Iron and Steel Research International, 2018,25(1): 1-8 .
[6]Guo, Hao; Yang, Shufeng; Li, Jingshe, et al. Effects of Surface-Modified MgO Nanoparticles on Inclusion Characteristics and Microstructure in Carbon Structural Steel [J].JOM, 2018, 70(7),1136-1142
[7]Chen, Zhengyang; Yang, Shufeng; Li, Jingshe, Effects of Different Hot Working Techniques on Inclusions in GH4738 Superalloy Produced by VIM and VAR [J]. MATERIALS, 2018, 11(6): 1024
[8]Yang, Shufeng; Zhao, Mengjing; Feng, Jie. Induced-Pitting Behaviors of MnS Inclusions in Steel[J]. High Temperature Materials and Processes, 2018 37(9): 1007-1016.
[9]Shi, Weining; Yang, Shufeng; Li, Jingshe, et al. Correlation between evolution of inclusions and pitting corrosion in 304 stainless steel with yttrium addition[J]. Scientific reports, 2018, 8(5): 4830
[10]Wang, Yang; Yang, Shufeng; Li, Jingshe. Dephosphorization by Double-Slag Process in Converter Steelmaking[J]. High Temperature Materials and Processes, 2018 37(7): 625-633.
[11]Yang Shufeng, Zhao M, Li J, et al. Removal of Zinc and Lead from Blast Furnace Dust in a Fluidized-Bed Roaster. Journal of Sustainable Metallurgy, 2017, 3(3): 441-449.
[12]Liao H, Yang Shufeng , Li J, et al. Characteristics of Non-metallic Inclusions in Steel Obtained from Different-Sized Samplers. Metallurgical and Materials Transactions B, 2017, 48(6): 3101-3108.
[13]Liu Q, Yang Shufeng , Zhao M, et al. Pitting Corrosion of Steel Induced by Al2O3 Inclusions. Metals, 2017, 7(9): 347.
[14]Wang L, Yang Shufeng , Li J, et al. Effect of Mg Addition on the Refinement and Homogenized Distribution of Inclusions in Steel with Different Al Contents. Metallurgical and Materials Transactions B, 2017, 48(2): 805-818.
[15]Gao X, Yang Shufeng , Li J, et al. Inclusion characteristics and microstructure properties under different cooling conditions in steel with nanoparticles addition. Ironmaking & Steelmaking, 2017: 1-7.
[16]Liu C, Yang Shufeng , Li J, et al. The Influence of FeO on the Reaction between Fe–Al–Ca Alloy and Al2O3–CaO–FeO Oxide during Heat Treatment at 1473 K. Metals, 2017, 7(4): 129.
[17]Liu C, Yang Shufeng , Li J, et al. Solid-State Reaction Between Fe-Al-Ca Alloy and Al2O3-CaO-FeO Oxide During Heat Treatment at 1473 K (1200℃)[J]. Metallurgical and Materials Transactions B, 2017, 48(2): 1348-1357.
[18]Liu W, Yang S, Li J, et al. Numerical Model of Dephosphorization Reaction Kinetics in Top Blown Converter Coupled with Flow Field[J]. High Temperature Materials and Processes, 2017, 36(6): 599-605.
[19]C Chen, X Yang, J Li, X Lu, S Yang. Direct Electrolytic Reduction of Solid Ta2 O5 to Ta with SOM Process[J]. Metallurgical and Materials Transactions B, 2016, 47(3): 1727-1735.
[20]Wang Y, Yang Shufeng , Li J, et al. Cyclic Use of Ladle Furnace Refining Slag for Desulfurization[J]. Journal of Sustainable Metallurgy, 2017, 3(2): 274-279.
[21]Chen C, Zhao C, Li J, S Yang. Direct Extraction of Ti and Ti Alloy from Ti-Bearing Dust Slag in Molten CaCl2[J]. High Temperature Materials and Processes, 2016, 35(6): 591-597.
[22]Yang Shufeng, Liu Wei, Li Jingshe. Motion of SolidParticles at Molten Metal–Liquid Slag Interface, JOM, 2015, 67(12): 2993-3001.
[23]Yang Shufeng, Li Jingshe, Liu Chao. Motion Behavior of Nonmetal Inclusions at the Interface of Steel and Slag. Part II: Model Application and Discussion, Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2014, 45 (6) : 2453-2463.
[24]Yang Shufeng, Wang Qiangqiang, Zhang Lifeng, Li Jingshe, Kent Peaslee. Formation and Modification of MgO center dot Al2O3-Based Inclusions in Alloy Steels, Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2012, 43 (4) : 731-750.
[25]Yang Shufeng, Lifeng Zhang, Liyuan Sun, Li Jingshe, Peaslee, Kent D. Investigation on MgO·AI2O3-based inclusions in steels, Iron and Steel Technology, 2012, 9 (8) : 245-258.
[26]Yang Shufeng, Li Jingshe, Lifeng Zhang, Kent Peaslee. Clean Steel Technology for the Production of 316L Stainless Steel Ultra-fine Wires, Iron and Steel Technology, 2012, 9 (1) : 47-55.
[27]Yang Shufeng, Li Jingshe. Behavior of MgO?Al2O3 based inclusions in alloy steel during therefining process, Journal of Iron and Steel Research International, 2011, 18 (1) : 18-23.
[28]Yang Shufeng, Li Jingshe. Modification of MgO?Al2O3 spinel inclusions by Ca-treatment in Al-killed steel, International Journal of Minerals Metallurgy and Materials, 2011, 18 (1) : 18-23.
[29]Shufeng Y, Jingshe L, Yan-Qi S. Study on the pelletizing of sulfate residue with magnetite concentrate in grate-kiln system[J]. Journal of Mining and Metallurgy B: Metallurgy, 2010, 46(1): 59-66.
[30]Yang Shufeng , Zhang Lifeng, Li Jingshe, Kent Peaslee. Structure Optimization of Horizontal Continuous Casting Tundishes using Mathematical Modeling and Water Modeling, ISIJ International, 2009, 49 (10) : 1511-1556.




获奖：
(1) 杨树峰(7/49)，电弧炉炼钢终点控制技术及应用，教育部，高等学校科学研究优秀成果奖（科学技术），省部二等奖，2018。（朱荣（1）董凯（2）杨树峰（7）魏光升（10）刘福海（15）胡绍岩（22）赵飞（33）王云（38）王雪亮（41）吴学涛（49））
(2) 杨树峰(6/8)，电弧炉炼钢复合吹炼技术的研究及应用，天津市人民政府，科技进步，省部二等奖，2015。（朱荣（2）杨树峰（6）马国宏（8））
(3) 杨树峰，第四届全国高校冶金院长奖，第十一届全国高校冶金院长暨冶金学科高层论坛组委会，2016。
(4) 高向宙, 李京社, 杨树峰, 等. 一种使钢中外加纳米粒子均匀弥散的方法: CN2.0[P].
(5) 高向宙, 李京社, 杨树峰, 等. 一种外加纳米粒子使钢组织细化并提高其力学性能的方法: CN1.6[P].
(6) 杨树峰, 李京社, 茅晓慧, 等. 一种去除铁矿石中铅锌元素的装置及其工艺: CN9.3[P].
(7) 张立峰, 杨树蜂. 一种表面活性氧化铝泡沫陶瓷过滤器的制备及使用方法: CN5.8[P].
(8) 张立峰, 李燕龙, 杨树峰. 一种低氧低硫高氮钢用的钢包渣改质剂的制备方法: CN9.8[P].
(9) 李京社, 杨树峰, 林晓川, 等. 一种减少钢中夹杂物的水平连铸中间包内部结构: CN1.3[P].
(10) 李京社, 杨树峰, 林晓川, 等. 一种连铸用十字螺旋浸入式水口: CN8.0[P].


主要科研项目/业绩：
(1) 国家自然科学基金优秀青年科学基金，**，钢种非金属夹杂物，2019/1-2021/12, 130万元，在研，主持
(2) 国家自然科学基金面上项目，**，连铸过程中铝脱氧钢水二次氧化行为研究，2017/1-2020/12，62万元，在研，主持
(3) 国家自然科学基金青年科学基金项目， **，不同温度下夹杂物特性的关联性研究，2014/1-2016/12，25万元，已提交结题报告，主持
(4) 国家自然科学基金重点项目，**，新型全废钢电弧炉炼钢工艺基础研究，2018/1-2022/12，300万元，在研，参与（技术负责人）
(5) 国家自然科学基金面上项目，**，热处理过程夹杂物与钢基体界面固相反应机理研究，2016/1-2019/12， 79.2万元，在研，参与
(6) 国家自然科学基金面上项目，**，非金属夹杂物对油井管用钢腐蚀性能的影响，2015/1-2018/12， 79.2万元，在研，参与
(7) 国家自然科学基金面上项目，**，非金属夹杂物的钢/渣界面行为研究，2014/1-2017/12， 78万元，已提交结题报告，参与
(8) 国家自然科学基金面上项目，** ，高强度合金钢中MgO?Al2O3夹杂物塑性化研究，2011/1-2013/12， 40万元，已提交结题报告，参与