1.Multi-row film cooling characteristics on a vane endwall

Li, XY, Ren, J, Jiang, HD

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2016, Volume 92, Pages 23-33

收录情况： WOS

WOS核心合集引用:2 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

2.Assessment of six turbulence models for modeling and predicting narrow passage flows, part1: Impingement jets

Li, WH, Ren, J, Jiang, HD, Ligrani, P

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS[1040-7782], Published 2016, Volume 69, Issue 2, Pages 109-127

收录情况： WOS

WOS核心合集引用:1 影响因子: 1.937 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

3.Assessment of six turbulence models for modeling and predicting narrow passage flows, part 2: Pin fin arrays

Li, WH, Ren, J, Jiang, HD, Luan, YG, Ligrani, P

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS[1040-7782], Published 2016, Volume 69, Issue 5, Pages 445-463

收录情况： WOS

WOS核心合集引用:3 影响因子: 1.937 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

4.Effect of thermal boundary conditions and thermal conductivity on conjugate heat transfer performance in pin fin arrays

Li, WH, Yang, L, Ren, J, Jiang, HD

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2016, Volume 95, Pages 579-592

收录情况： WOS

WOS核心合集引用:2 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

5.Geometrical Optimization and Experimental Validation of a Tripod Film Cooling Hole With Asymmetric Side Holes

Chi, ZR, Ren, J, Jiang, HD, Zang, SS

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME[0022-1481], Published 2016, Volume 138, Issue 6,

收录情况： WOS

影响因子: 1.723 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

6.Conjugate Heat Transfer Characteristics of a Highly Thermal-Loaded Film Cooling System in Hot and Multicomposition Gas Condition

Li, MF, Yin, H, Ren, J, Jiang, HD

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME[0022-1481], Published 2016, Volume 138, Issue 2,

收录情况： WOS

WOS核心合集引用:1 影响因子: 1.723 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

7.Influence of different film cooling arrangements on endwall cooling

Li, XY, Ren, J, Jiang, HD

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2016, Volume 102, Pages 348-359

收录情况： WOS

影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

8.Effects of wall curvature and streamwise pressure gradient on film cooling effectiveness

Qin, YM, Chen, PT, Ren, J, Jiang, HD

APPLIED THERMAL ENGINEERING[1359-4311], Published 2016, Volume 107, Pages 776-784

收录情况： WOS

影响因子: 3.043 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

9.OVERALL COOLING EFFECTIVENESS ON A FLAT PLATE WITH BOTH FILM COOLING AND IMPINGEMENT COOLING IN HOT GAS CONDITION

Shi, B, Li, J, Li, MF, Ren, J, Jiang, HD

PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5A, Published 2016,

收录情况： WOS

找找相关文章

-----------------------------------------------------------------

10.INFLUENCE OF TOPOLOGY ON HEAT TRANSFER IN A DOUBLE WALL COOLING CHANNEL: POTENTIAL OF SERIES-LINKED JETS

Yang, L, Li, WH, Ren, J, Chyu, MK, Jiang, LD

PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5B, Published 2016,

收录情况： WOS

找找相关文章

-----------------------------------------------------------------

11.EFFECT OF REYNOLDS NUMBER, HOLE PATTERNS AND HOLE INCLINATION ON COOLING PERFORMANCE OF AN IMPINGING JET ARRAY, PART I: CONVECTIVE HEAT TRANSFER RESULTS AND OPTIMIZATION

Li, WH, Li, XY, Ren, J, Jiang, HD, Yang, L, Ligrani, P

PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5B, Published 2016,

收录情况： WOS

找找相关文章

-----------------------------------------------------------------

12.EFFECT OF REYNOLDS NUMBER, HOLE PATTERNS, TARGET PLATE THICKNESS ON COOLING PERFORMANCE OF AN IMPINGING JET ARRAY: PART II - CONJUGATE HEAT TRANSFER RESULTS AND OPTIMIZATION

Li, WH, Li, XY, Ren, J, Jiang, HD, Yang, L

PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5B, Published 2016,

收录情况： WOS

找找相关文章

-----------------------------------------------------------------

13.Use of pressure measurements to determine effectiveness of turbine rim seals.

Owen,J.Michael,Wu,Kang,Scobie,James A.,Sangan,Carl M.,Cho,Geonhwan,Lock,Gary D.

Journal of Engineering for Gas Turbines and Power[0742-4795], Published 2015, Volume 137, Issue 3,

收录情况： WOS

影响因子: 1.022 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

14.整级透平中转静轮缘封严问题研究partⅱ:不同封严结构的特性

吴康,任静,蒋洪德

工程热物理学报[0253-232X], Published 2015, Volume 36, Issue 3, Pages 496-500

找找相关文章

-----------------------------------------------------------------

15.Optimal Arrangement of Combined-Hole for Improving Film Cooling Effectiveness

Han, C, Chi, ZR, Ren, J, Jiang, HD

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS[1948-5085], Published 2015, Volume 7, Issue 1,

收录情况： WOS

WOS核心合集引用:1 影响因子: 0.809 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

16.Unsteady Structure and Development of a Row of Impingement Jets, Including Kelvin-Helmholtz Vortex Development

Yang, L, Ligrani, P, Ren, J, Jiang, HD

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2015, Volume 137, Issue 5,

收录情况： WOS

WOS核心合集引用:2 影响因子: 1.283 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

17.Effects of compound angle on film cooling effectiveness with different streamwise pressure gradient and convex curvature

Qin, YM, Li, XY, Ren, J, Jiang, HD

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2015, Volume 86, Pages 482-491

收录情况： WOS

WOS核心合集引用:1 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

18.Film cooling effectiveness distribution of cylindrical hole injections at different locations on a vane endwall

Li, XY, Ren, J, Jiang, HD

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2015, Volume 90, Pages 1-14

收录情况： WOS

WOS核心合集引用:3 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

19.Application of algebraic anisotropic turbulence models to film cooling flows

Li, XY, Ren, J, Jiang, HD

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2015, Volume 91, Pages 7-17

收录情况： WOS

WOS核心合集引用:2 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

20.Algebraic anisotropic turbulence modeling of compound angled film cooling validated by particle image velocimetry and pressure sensitive paint measurements

Li, Xueying,Qin, Yanmin,Ren, Jing,Jiang, Hongde

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME[0022-1481], Published 2014, Volume 136, Issue 3, Pages -

收录情况： WOS

WOS核心合集引用:8 影响因子: 1.723 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

21.Analysis and optimization of interaction between endwall flank flow and turbine rotor-stator rim seal

Wu, Kang,Lin, Li,Ren, Jing,Jiang, Hong-De

Tuijin Jishu/Journal of Propulsion Technology[1001-4055], Published 2014, Volume 35, Issue 6, Pages 758-765

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

22.Assesment of six turbulence models for pin fin arrays of blade trailing edge

Li,Weihong,Ren,Jing,Jiang,Hongde

Proceedings of 5th ISJPPE, Published 2014,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

23.Combined effects of perforated blockages and pin fins in a trailing edge internal cooling duct

Kan,Rui,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-84571-4], Published 2014, Volume 5A,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

24.Coupled aerothermodynamics optimization for the cooling system of a turbine vane

Chi, Zhongran,Ren, Jing,Jiang, Hongde

Journal of Turbomachinery[0889-504X], Published 2014, Volume 136, Issue 5,

收录情况： WOS

WOS核心合集引用:4 影响因子: 0.661 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

25.Effect of Corrugated Orifice and Pin-Fin on Multiple Array Impingement Cooling with Low Nozzle to Target Distance

Yang,Li,Li,Weihong,Chi,Zhongran,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-84571-4], Published 2014, Volume 5A,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

26.Effect of Radiative Heat Transfer Factors on Temperature Distribution of a First Stage Vane

Yin,H,Li,M,Chi,Z,Ren,J,Jiang,H

Proceedings of the ASME Turbo Expo[978-0-791-84572-1], Published 2014, Volume 5B,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

27.Experimental and numerical investigation of unsteady impingement cooling within a blade leading edge passage

Yang, Li,Ren, Jing,Jiang, Hongde,Ligrani, Phillip

International Journal of Heat and Mass Transfer[0017-9310], Published 2014, Volume 71, Pages 57-68

收录情况： WOS

WOS核心合集引用:13 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

28.Experimental investigations of sycee film coolng performance on a plate and a tested vane of an F-Class gas turbine

Han,Chang,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-84572-1], Published 2014, Volume 5B,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

29.Film cooling modeling of turbine blades using algebraic anisotropic turbulence models

Li,XY,Ren,J,Jiang,HD

Journal Of Turbomachinery-Transactions Of The Asme[0889-504X], Published 2014, Volume 136, Issue 11,

收录情况： WOS

WOS核心合集引用:2 影响因子: 0.661 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

30.Geometrical optimization and experimental validation of a tripod film cooling hole with asymmetric side holes

Chi,Zhongran,Han,Chang,Li,Xueying,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-84572-1], Published 2014, Volume 5B,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

31.Heat transferring of channels with repeated ribs in turbine blades Part II: Conjugate heat transfer characteristics

Chi, Zhong-Ran,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2014, Volume 35, Issue 1, Pages 42-45

找找相关文章

-----------------------------------------------------------------

32.Optimization of the hole exit shaping of film holes without and with compound angles for maximal film cooling effectiveness

Chi,Zhongran,Li,Xueying,Han,Chang,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-84572-1], Published 2014, Volume 5B,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

33.Phantom cooling of nozzle trailing edge discharge on blade surface and platform

Li,Xueying,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-84572-1], Published 2014, Volume 5B,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

34.Prediction of 3D Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model

Tan,Qinxue,Ren,Jing,Jiang,Hongde

ASME Turbo Expo 2014[978-0-791-84572-2], Published 2014,

找找相关文章

-----------------------------------------------------------------

35.Rotor-stator rim seal analysis in one stage gas turbine Part I: Ingestion and seal

Wu, Kang,Ren, Jing,Jiang, Hong-De,Michael Owen, J.

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2014, Volume 35, Issue 5, Pages 873-877

找找相关文章

-----------------------------------------------------------------

36.Status and development trend of the heavy duty gas turbine

Jiang, Hongde,Ren, Jing,Li, Xueying,Tan, Qinxue

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering[0258-8013], Published 2014, Volume 34, Issue 29, Pages 5096-5102

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

37.Total hemispherical radiation properties of oxidized nickel at high temperatures

Fu, Tai Ran,Tan, Peng,Ren, Jing,Wang, Hua Sheng

Corrosion Science[0010-938X], Published 2014,

收录情况： WOS

WOS核心合集引用:5 影响因子: 5.154 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

38.Turbulence modeling of film cooling with algebraic anisotropic turbulent scalar-flux correction

Li, Xue-Ying,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2014, Volume 35, Issue 2, Pages 247-251

找找相关文章

-----------------------------------------------------------------

39.主流流向压力梯度对气膜冷却效率的影响

秦晏旻,任静,蒋洪德

工程热物理学报[0253-233X], Published 2014, Volume 35, Issue 3, Pages 461-464

找找相关文章

-----------------------------------------------------------------

40.低ma数预处理间断有限元方法研究

谭勤学,任静,蒋洪德

清华大学学报[1000-0054], Published 2014,

找找相关文章

-----------------------------------------------------------------

41.冲击冷却对燃气轮机尾缘双流程内冷通道传热和压损的影响

阚瑞,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Volume 35, Issue 7, Pages 1295-1299

找找相关文章

-----------------------------------------------------------------

42.叶片双层冷却单元的修正一维模型

杨力,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Volume 35, Issue 10, Pages 1943-1946

找找相关文章

-----------------------------------------------------------------

43.各向异性涡黏模型在通道分离流动中的应用

李威宏,杨力,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Volume 35, Issue 9, Pages 1727-1732

找找相关文章

-----------------------------------------------------------------

44.多场耦合下透平冷却高温影响特性

李明飞,迟重然,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Volume 35, Issue 8, Pages 1513-1516

找找相关文章

-----------------------------------------------------------------

45.带标量修正的气膜冷却各向异性湍流模型

李雪英,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Issue 2,

找找相关文章

-----------------------------------------------------------------

46.气膜冷却布置对前缘流动传热的影响

李雪英,李明飞,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Volume 35, Issue 12, Pages 2372-2375

找找相关文章

-----------------------------------------------------------------

47.燃机叶片平行肋扰流内冷通道传热特性研究part2:耦合传热特性

迟重然,任静,蒋洪德

工程热物理学报[0253-231X], Published 2014, Issue 1,

找找相关文章

-----------------------------------------------------------------

48.端壁侧向出流对透平轮缘密封的影响及优化

吴康,林立,任静,蒋洪德

推进技术[1001-4055], Published 2014, Issue 6,

找找相关文章

-----------------------------------------------------------------

49.透平静叶前缘和压力面气膜冷却实验研究

韩昌,任静,蒋洪德

清华大学学报(自然科学版)[1000-0054], Published 2014, Volume 54, Issue 6, Pages 769-774

找找相关文章

-----------------------------------------------------------------

50.间断galerkin方法在气冷透平流热耦合计算中的应用

谭勤学,任静,蒋洪德

广东电力[1007-290X], Published 2014, Volume 27, Issue 11, Pages 1-5

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

51.Algebraic anisotropic turbulence modeling of compound angled film cooling validated by PIV and PSP measurements

Li, Xueying,Qin, Yanmin,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo[978-0-791-85515-7], Published 2013, Volume 3, Issue 3,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

52.Cooling structure optimization for a rib-roughed channel in a turbine rotor blade

Chi, Zhongran,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2013, Volume 3,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

53.Coupled aero-thermodynamics optimization for the cooling system of a turbine vane

Chi, Zhongran,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2013, Volume 3,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

54.Effect of film cooling arrangement on impingement heat transfer on turbine blade leading edge

Yang, Li,Kan, Rui,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2013, Volume 3,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

55.Effect of inlet swirl on the model leading edge of turbine vane

Yin,Hong,Qin,Yanmin,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-7918-5523-2], Published 2013, Volume 6,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

56.Effect of RIB configuration and lateral ejection on a high aspect ratio trailing edge channel

Kan,Rui,Yang,Li,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-85514-0], Published 2013, Volume 3,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

57.Effects of swirlers arrangement on gas turbine combustion chamber flow field

Yin, Hong,Ren, Jing,Jiang, Hongde

International Conference on Power Engineering 2013, ICOPE 2013, Published 2013,

找找相关文章

-----------------------------------------------------------------

58.Effects of swirlers arrangement on gas turbine combustion chamber flow field

Yin,Hong,Ren,Jing,iang,Hongde

International Conference on Power Engineering, Published 2013,

找找相关文章

-----------------------------------------------------------------

59.Experimental and numerical study of the anti-crossflows impingement cooling structure

Chi, Zhongran,Kan, Rui,Ren, Jing,Jiang, Hongde

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2013, Volume 64, Pages 567-580

收录情况： WOS

WOS核心合集引用:17 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

60.Heat transfer character of film cooling combined with TBCs in hot and multi-composition gas condition

Li, Ming-Fei,Yin, Hong,Sun, Peng,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2013, Volume 34, Issue 7, Pages 1251-1255

找找相关文章

-----------------------------------------------------------------

61.Heat transfer characteristics of film cooling in the non-transparent gas environment

Sun, Peng,Wang, Wen-Ping,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2013, Volume 34, Issue 2, Pages 249-252

找找相关文章

-----------------------------------------------------------------

62.Heat transferring of channels with repeated ribs in turbine blades part1: Mechanism of flow and convective heat transfer

Chi, Zhong-Ran,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2013, Volume 34, Issue 4, Pages 624-627

找找相关文章

-----------------------------------------------------------------

63.Influence of different turbulence models in predicting convective heat transfer in a cascade

Li, Xue-Ying,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2013, Volume 34, Issue 6, Pages 1042-1046

找找相关文章

-----------------------------------------------------------------

64.Optimal arrangement of combined-hole for improving film cooling effectiveness

Han, Chang,Chi, Zhongran,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2013, Volume 3,

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

65.Unsteady characteristic of film cooling and phantom cooling on the first stage of a gas turbine: Part 1 - Vane cascade

Han, Chang,Chi, Zhong-Ran,Yin, Hong,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2013, Volume 34, Issue 5, Pages 845-848

找找相关文章

-----------------------------------------------------------------

66.Unsteady characteristic of film cooling and phantom cooling on the first stage of a gas turbine: Part 2 - Blade cascade

Han, Chang,Chi, Zhong-Ran,Yin, Hong,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2013, Volume 34, Issue 12, Pages 2258-2261

找找相关文章

-----------------------------------------------------------------

67.不同湍流模型对叶栅对流传热预测的影响

李雪英,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Issue 6,

找找相关文章

-----------------------------------------------------------------

68.全矩阵无积分间断有限元实现

谭勤学,任静,蒋洪德

中国科技论文[2095-2783], Published 2013, Volume 8, Issue 8, Pages 776-779

找找相关文章

-----------------------------------------------------------------

69.扇形孔气膜冷却应用的综合特性

李雪英,韩昌,秦晏旻,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Volume 34, Issue 1, Pages 55-58

找找相关文章

-----------------------------------------------------------------

70.扇形孔气膜冷却应用的综合特性 - characteristics of fan shaped hole film cooling

李雪英,韩昌,秦晏旻,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Volume 34, Issue 1,

找找相关文章

-----------------------------------------------------------------

71.燃机叶片平行肋扰流内冷通道传热特性研究Part Ⅰ:流动传热机理

迟重然,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Issue 4,

找找相关文章

-----------------------------------------------------------------

72.燃气轮机一级透平动静叶交互作用的气膜非定常特性及泛冷却效应:Part 1-静叶栅

韩昌,迟重然,尹洪,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Issue 5,

找找相关文章

-----------------------------------------------------------------

73.燃气轮机内部冷却瞬态液晶技术的误差分析

阚瑞,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Volume 34, Issue 8, Pages 1444-1448

找找相关文章

-----------------------------------------------------------------

74.燃气轮机内部冷却瞬态液晶技术的误差分析 - uncertainties of the transient thermochromic liquid crystal method in gas turbine internal cooling measurements

阚瑞,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Volume 34, Issue 8,

找找相关文章

-----------------------------------------------------------------

75.非透明气体环境中气膜冷却的流热特性

孙鹏,王文萍,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Issue 2,

找找相关文章

-----------------------------------------------------------------

76.高温多组分工况下气膜冷却及tbcs传热特性

李明飞,尹洪,孙鹏,任静,蒋洪德

工程热物理学报[0253-231X], Published 2013, Issue 7,

找找相关文章

-----------------------------------------------------------------

77.Application of the anisotropic eddy-viscosity model to film cooling flows with different geometries

Li, Xue-Ying,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2012, Volume 33, Issue 4, Pages 578-582

找找相关文章

-----------------------------------------------------------------

78.Application of transient liquid crystal on internal cooling research of gas turbine airfoil

Chen, Wei,Yang, Li,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2012, Volume 33, Issue 4, Pages 665-669

找找相关文章

-----------------------------------------------------------------

79.Effect of the hot gas composition on a highly thermally loaded film cooling system

Sun, Peng,Wang, Wenping,Ren, Jing,Jiang, Hongde

PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 5, PTS A AND B, Published 2012, Pages 335-344

收录情况： WOS

找找相关文章

-----------------------------------------------------------------

80.Effects of inlet swirl condition on the flow and heat transfer performance of gas turbine vane

Yin, Hong,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2012, Volume 33, Issue 11, Pages 1868-1871

找找相关文章

-----------------------------------------------------------------

81.Full field algebraic anisotropic eddy viscosity model for the film cooling flows

Li, Xueying,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2012, Volume 4, Issue PARTS A AND B, Pages 1421-1430

收录情况： WOS

WOS核心合集引用:1 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

82.Heat transfer characteristic of rotor-stator system with small radial outflow

Lin, Li,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2012, Volume 33, Issue 7, Pages 1122-1126

收录情况： WOS

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

83.Multi-dimensional platform for cooling design of air-cooled turbine blades

Chi, Zhongran,Wang, Songtao,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2012, Volume 4, Issue PARTS A AND B, Pages 207-218

收录情况： WOS

WOS核心合集引用:1 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

84.Multi-parameter influence on combined-hole film cooling system

Han Chang,Ren Jing,Jiang Hong-de

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2012, Volume 55, Issue 15-16, Pages 4232-4240

收录情况： WOS

WOS核心合集引用:9 影响因子: 2.857 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

85.Multi-parameter influence on film cooling of blade tip

Han, Chang,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2012, Volume 33, Issue 9, Pages 1501-1504

找找相关文章

-----------------------------------------------------------------

86.Radiation effectiveness on the AERO- and thermodynamics in a highly thermally loaded film cooling system

Wang Wenping,Sun Peng,Ren Jing,Jiang Hongde

PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 5, PTS A AND B, Published 2012, Pages 325-334

收录情况： WOS

找找相关文章

-----------------------------------------------------------------

87.Radiative models for hot gas with various H2O-CO2 ratios

Sun, Peng,Zhou, Yuji,Ren, Jing,Jiang, Hongde

Proceedings of the ASME Turbo Expo, Published 2012, Volume 4, Issue PARTS A AND B, Pages 1041-1049

收录情况： WOS

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

88.Research on the effect of combustor outlet radiation on the film cooling heat transfer

Yin, Hong,Wang, Wen-Ping,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2012, Volume 33, Issue 2, Pages 214-217

找找相关文章

-----------------------------------------------------------------

89.多参数对叶顶气膜冷却的影响

韩昌,任静,蒋洪德

工程热物理学报[0253-231X], Published 2012, Issue 9,

找找相关文章

-----------------------------------------------------------------

90.多参数影响下的气膜冷却特性及预测方法 - prediction methods and performance of film cooling influenced by Multi-Parameters

秦晏旻,李雪英,郭安琪,任静,蒋洪德

热力透平[1672-5549], Published 2012, Volume 41, Issue 1,

找找相关文章

-----------------------------------------------------------------

91.小流量下的转静系盘腔传热特征分析 - heat transfer characteristic of Rotor-Stator system with small radial outflow

林立,任静,蒋洪德

工程热物理学报[0253-231X], Published 2012, Volume 33, Issue 7,

找找相关文章

-----------------------------------------------------------------

92.旋流条件对燃气轮机叶片流动传热特性的影响

尹洪,任静,蒋洪德

工程热物理学报[0253-231X], Published 2012, Issue 11,

找找相关文章

-----------------------------------------------------------------

93.湍流黏性修正在不同孔型气膜计算中的应用 - application of the anisotropic Eddy-Viscosity model to film cooling flows with different geometries

李雪英,任静,蒋洪德

工程热物理学报[0253-231X], Published 2012, Volume 33, Issue 4,

找找相关文章

-----------------------------------------------------------------

94.燃气轮机二次空气系统一维传热特性预测 - prediction of the secondary air system＇ s 1d heat transfer characteristics in the gas turbine

谭勤学,任静,蒋洪德

热力透平[1672-5549], Published 2012, Volume 41, Issue 2,

找找相关文章

-----------------------------------------------------------------

95.燃烧室出口辐射对气膜冷却传热影响研究 - research on the effect of combustor outlet radiation on the film cooling heat transfer

尹洪,王文萍,任静,蒋洪德

工程热物理学报[0253-231X], Published 2012, Volume 33, Issue 2,

找找相关文章

-----------------------------------------------------------------

96.瞬态液晶技术在涡轮叶片内部冷却研究中的应用 - application of transient liquid crystal on internal cooling research of gas turbine airfoil

陈伟,杨力,任静,蒋洪德

工程热物理学报[0253-231X], Published 2012, Volume 33, Issue 4,

找找相关文章

-----------------------------------------------------------------

97.Aero-and thermodaynamic features of the flow fields in the internal cooling channels with film cooling holes

Yang, Li,Kan, Rui,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2011, Volume 32, Issue 8, Pages 1385-1388

找找相关文章

-----------------------------------------------------------------

98.Algebraic anisotropic eddy-viscosity modeling for application to turbulent film cooling flows

Li,Xueying,Ren,Jing,Jiang,Hongde

Proceedings of the ASME Turbo Expo[978-0-791-85465-5], Published 2011, Volume 5, Issue PTS A AND B, Pages 379-388

收录情况： WOS

找找相关文章 PlumX Metrics

-----------------------------------------------------------------

99.Effect of Turning Vane Configurations on Heat Transfer and Pressure Drop in a Ribbed Internal Cooling System

Chen, Wei,Ren, Jing,Jiang, Hongde

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME[0889-504X], Published 2011, Volume 133, Issue 4, Pages -

收录情况： WOS

WOS核心合集引用:5 影响因子: 0.661 找找相关文章 PlumX Metrics

-----------------------------------------------------------------

100.Effects of density ratio and blowing ratio on the film cooling effectiveness on a turbine vane

Li, Jia,Ren, Jing,Jiang, Hong-De

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2011, Volume 32, Issue 8, Pages 1295-1298

找找相关文章