姓名 李水清
技术职务教授，博士生导师
办公电话
通讯地址清华大学能源与动力工程系
电子邮件lishuiqing@tsinghua.edu.cn
教育背景1993.09-1997.07 浙江大学 工程热物理 学士
1997.08-2002.06 浙江大学 工程热物理 博士
工作履历2002.07-2004.09清华大学 热能工程系 博士后
2004.10-2007.12 清华大学 热能工程系 讲 师
2004.11-2005.05 利兹大学 化学工程系 访问
2006.03-2006.09 爱荷华大学 机械与工业工程系 访问
2010.12-2011.12普林斯顿大学 机械与航天工程系 访问
2007.12-2012.12清华大学 热能工程系 副研究员，博导（09）
2012.12-至今 清华大学 热能工程系 研究员，博导
学术兼职2008年-至今 国际燃烧协会 会员、第33届会议组委会成员
2008年-至今 中国颗粒协会 青年理事
2010年-至今 美国气溶胶协会(AAAR) 会员
2011年-至今 国际颗粒介质离散元模型会议 学术委员会 理事
研究领域颗粒流和颗粒动力学、非均相燃烧机理、煤清洁燃烧基础
研究概况围绕热能学科中多相流离散颗粒介质和非均相燃烧两大科学问题开展研究，在多场耦合多相反应体系的颗粒动力学研究方面形成特色。迄今国际论文总引314次，他引263次，H-指数12。已完成或执行的主要项目如下：
1.国家自然科学基金 导流管喷动床内大颗粒运动和扩散行为实验和理论研究 (**) 负责人；
2.国家自然科学基金 火焰法合成纳米钛基颗粒过程中碰撞-聚并机制的基础研究 (**) 负责人；
3.国家自然科学基金 范德华力和静电力作用下细颗粒沉积和聚集动力学研究(**) 负责人；
4.国家自然科学基金 滞止火焰场内纳米颗粒生成和催化点燃的机理研究(**) 负责人；
5.国家自然科学基金国际合作项目 生物质和煤混烧过程有毒元素及颗粒物减排新方法和模型 负责人；
6.国际横向合作项目 工业设备中颗粒积灰和黏附危害抑制技术的研究 负责人；
7.国际横向合作项目 常规和富氧燃烧条件下煤与生物质燃烧机理研究 负责人；
8.国内企业合作项目 低阶煤及神华煤的燃烧特性研究 负责人；
学术成果 A. Reviews or Books
2. Li SQ*, Marshall JS, Liu G, Yao Q, Adhesive particulate flow: the discrete element method and its application in energy and environmental engineering. PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2011, 37, 633-668.
1. Yao Q, Li SQ*, Xu HW, Zhuo JK, Song Q, Studies on formation and control of combustion particulate matter in China: A review. ENERGY, 2009, 34(9):1296-1309.
B. Journal Articles:
28. Yang MM, Li SQ*, Yao Q. Mechanistic studies of initial deposition of fine adhesive particles on a fiber using discrete-element methods, POWDER TECHNOLOGY, 2013, In Press
27. Zhang YY, Xiong G., Li SQ, Dong ZZ, Buckley SG, Tse SD* Novel low-intensity phase-selective laser-induced breakdown spectroscopy of TiO2 nanoparticle aerosols during flame synthesis. COMBUSTION & FLAME, 2013, In Press
26. Li GD, Li SQ*, Dong M, Yao Q, Guo CY. Comparison of particulate formation and ash deposition under oxy-fuel and conventional pulverized coal combustions. FUEL, 2013, In Press.
25. Zhang YY, Li SQ*, Yan W, Tse SD*. Effect of size-dependent grain structures on the dynamics of nanoparticle coalescence. JOURNAL APPLIED PHYSICS, 2012, 111, 124321.
24. Zhang YY, Li SQ*, Yan W, Yao Q. Nanoparticle and transport and deposition in boundary layer of stagnation-point premixed flames. POWDER TECHNOLOGY, 2012, 227, 24-34.
23. Zhuo JK, Li SQ, Duan L, Yao Q. Effect of Phosphorus Transformation on the Reduction of Particulate Matter Formation during Co-combustion of Coal and Sewage Sludge, ENERGY & FUELS, 2012, 26, 3162-3166.
22. Zhang YY, Li SQ*, Yan W, Yao Q, Tse SD, Direct synthesis of nanostructured TiO2 films with controlled morphologies by stagnation swirl flames. JOURNAL OF AEROSOL SCIENCE, 2012, 44, 71-82.
21. Zhang YY, Li SQ*, Yan W, Yao Q, Tse SD, Role of dipole-dipole interaction on enhancing Brownian coagulation of charge-neutral nanoparticles in the free molecular regime. JOURNAL OF CHEMICAL PHYSICS, 2011, 134 (8):084501.
20. Wang JJ, Li SQ*, Yan W, Tse SD, Yao Q, Synthesis of TiO2 nanoparticles by premixed stagnation swirl flames. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2011, 33(2): 1925-1932.
19. Liu GQ, Li SQ*, Yao Q, A JKR-based dynamic model for the impact of micro-particle with a flat surface. POWDER TECHNOLOGY, 2011, 207(1-3): 215-223.
18. Liu G, Marshall JS*, Li SQ, Yao Q, Discrete-element method for particle capture by a body in an electrostatic field. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2010, 84(13): 1589-1612.
17. Yan W, Li SQ*, Zhang YY, Yao Q, Tse SD, Effects of Dipole Moment and Temperature on the Interaction Dynamics of Titania Nanoparticles during Agglomeration. JOURNAL OF PHYSICAL CHEMISTRY C, 2010, 114(24): 10755-10760.
16. Xu XG ,Li SQ*,Li GD,Yao Q, Effect of Co-firing Straw with Two Coals on the Ash Deposition Behavior in a Down-Fired Pulverized Coal Combustor, ENERGY & FUELS, 2010, 24(1):241-249.
15. Zhuo JK, Li SQ*, Yao Q, Song Q, The progressive formation of submicron particulate matter in a quasi one-dimensional pulverized coal combustor. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2009, 32, 2059-2066.
14. Liu GQ, Li SQ*, Zhao XL, et al., Experimental studies of particle flow dynamics in a two-dimensional spouted bed, CHEMICAL ENGINEERING SCIENCE, 2008, 63(4):1131-1141.
13. Zhao XL, Li SQ*, Liu GQ, Yao Q, DEM simulation of the particle dynamics in two-dimensional spouted beds, POWDER TECHNOLOGY, 2008, 184(2):205-213.
12. Zhao XL, Li SQ*, Liu GQ, Yao Q, Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations, POWDER TECHNOLOGY, 2008, 183(1):79-87.
11. Zhao XY , Yao Q*, Li SQ, Cai NS, Studies on the carbon reactions in the anode of deposited carbon fuel cells, JOURNAL OF POWER SOURCES,2008,185(1):104-111.
10. Li SQ*, Marshall JS, Discrete element simulation of micro-particle deposition on a cylindrical fiber in an array, JOURNAL OF AEROSOL SCIENCE, 2007, 38(10):1031-1046.
9. Li SQ*, Yao Q, Chen B, et al., Molecular dynamics simulation and continuum modelling of granular surface flow in rotating drums, CHINESE SCIENCE BULLETIN, 2007, 52(5):692-700.
8. Zhao XL, Yao Q, Li SQ*, Effects of draft tubes on particle velocity profiles in spouted beds, CHEMICAL ENGINEERING & TECHNOLOGY, 2006,29(7):875-881.
7. Huang B*, Yao Q, Li SQ, Zhao HL, et al, Experimental investigation on the particle capture by a single fiber using microscopic image technique, POWDER TECHNOLOGY, 2006,163(3):125-133.
6. Li SQ, Ding YL*, Wen DS, et al., Modelling of the behaviour of gas-solid two-phase mixtures flowing through packed beds, CHEMICAL ENGINEERING SCIENCE, 2006, 61(6):1922-1931.
5. Li SQ*, Ma LB, Wan W, et al., A mathematical model of heat transfer in a rotary kiln thermo-reactor, CHEMICAL ENGINEERING & TECHNOLOGY, 2005, 28(12):1480-1489.
4. Li SQ*, Yao Q, Wen SE, et al., Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires, JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 2005,55(9):1315-1326.
3. Li SQ*, Yao Q, Chi Y, et al., Pilot-scale pyrolysis of scrap tires in a continuous rotary kiln reactor, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2004, 43(17):5133-5145.
2. Li SQ*, Chi Y, Li RD, et al., Axial transport and residence time of MSW in rotary kilns: Part II. Theoretical and optimal analyses, POWDER TECHNOLOGY, 2002,126(3):228-240.
1. Li SQ*, Yan JH, Li RD, et al., Axial transport and residence time of MSW in rotary kilns - Part I. Experimental, POWDER TECHNOLOGY, 2002,126(3):217-227.
(* indicating correspondence of the paper)
C. Invited Seminars and Colloquiua
6. Multi-scale Views on nanoparticle transport & deposition in stagnation flames synthesis. Invited Seminar, University of Southern California, Dec. 12, 2011
5. Transport and deposition of nanoparticles in stagnation boundary layer flames: experiment and modelling. MAE Seminar Series, Princeton University, Nov. 7, 2011
4. Interaction dynamics of micro- and nano-sized particles in flow-electric coupled fields. MAE Seminar Series, Clarkson University, Oct. 14, 2011
3. Microdynamics of fine particles in presence of van der waals and electrostatic forces: discrete-element method and its application. MAE Colloquium Series, Rutgers University, April, 27, 2011
2. Modelling and experiments of wet granular flows in rotating drums. IMA Dense granular Flow Workshop, Cambridge University, Jan 6, 2009
1. Adhesive Particulate Flow: the discrete element approach and its application in engineering. Inviting Seminar, Washington University at St. Louis, Sep. 15, 2008