姓 名 祝银海
技术职务 副教授
办公电话 **
通讯地址 清华大学热能工程系
电子邮件 yinhai.zhu@mail.tsinghua.edu.cn
教育背景1999.9-2003.7 西安交通大学能源与动力工程学院 热能与动力工程专业 学士
2003.9-2006.6 西安交通大学能源与动力工程学院 制冷及低温工程专业 硕士
2006.9-2009.12 西安交通大学能源与动力工程学院 制冷及低温工程专业 博士
2007.7-2008.7新加坡南洋理工大学 国家公派联合培养博士生
工作履历2009.11-2011.10 清华大学热能工程系 博士后 助理研究员
2011.11-2013.12 清华大学热能工程系 助理研究员
2013.12-至今 清华大学热能工程系 副研究员
研究领域主要从事制冷低温与传热传质领域的研究工作，主要研究内容有：喷射制冷系统、跨临界二氧化碳空调与热泵系统、液体运载火箭热控技术、超燃冲压发动机主动冷却技术等。
研究概况负责的科研项目：
喷射器内激波调控与超音速两相流热质传递机理研究、国家自然科学基金面上项目、2016-2019、负责人
蒸汽喷射器的激波特性与引射机理研究、清华大学自主科研计划、2015-2017、负责人
喷射器内跨临界CO2的跨音速流动和雾化相变问题研究、国家自然科学青年基金、 2012-2014、负责人
非绝热裂解XXX、高超声速冲压发动机技术重点实验室、2013-2014、负责人
参与的科研项目：
超临界压力流体在多因素作用下的流动与热质传递机理研究、国家自然科学基金重点项目、2016-2020、研究骨干
高温与超音速条件下碳氢燃料发汗冷却基础问题研究、国家自然科学基金面上项目、2013-2016、研究骨干
XXX反应机理研究、国家重大专项、2011-2015、研究骨干
XXX机理及热防护研究、国防基础科研计划项目、2011-2013、研究骨干
奖励与荣誉西安交通大学年度“优秀研究生标兵”表彰奖励（2008）
中国青少年科技创新奖（2009）
西安交通大学校级优秀博士学位论文奖（2010）
学术成果 Z. Huang, Y. H. Zhu, Y. B. Xiong, and P. X. Jiang, INVESTIGATION OF SUPERSONIC TRANSPIRATION COOLING THROUGH SINTERED METAL POROUS FLAT PLATES. Journal of Porous Media, 18 (11): 1047–1057 (2015).
Bo Liu, Yinhai Zhu, Jun-Jie Yan, Yuntao Lei, Bo Zhang, Pei-Xue Jiang. Experimental investigation of convection heat transfer of n-decane at supercritical pressures in small vertical tubes. International Journal of Heat and Mass Transfer 91 (2015) 734–746.
Z. Huang, Y. H. Zhu, P. X. Jiang, and Y. B. Xiong, "Investigation of a Porous Transpiration-Cooled Strut Injector," Journal of Propulsion and Power, Vol. 31, No. 1 (2015), pp. 278-285.
Zheng Huang, Yan-Bin Xiong, Yuan-Qing Liu, Pei-Xue Jiang, Yin-Hai Zhu. Experimental investigation of full-coverage effusion cooling through perforated flat plates. Applied Thermal Engineering 76 (2015) 76-85.
Yinhai Zhu, Peixue Jiang. Experimental and analytical studies on the shock wave length in convergent and convergent–divergent nozzle ejectors. Energy Conversion and Management 88 (2014) 907–914.
Zheng Huang, Yin-hai Zhu, Yan-bin Xiong, Pei-xue Jiang. Investigation of transpiration cooling for sintered metal porous struts in supersonic flow. Applied Thermal Engineering, Volume 70, Issue 1, 5 September 2014, Pages 240-249.
Yinhai Zhu, Peixue Jiang. Bypass ejector with an annular cavity in the nozzle wall to increase the entrainment: Experimental and numerical validation. Energy, Volume 68, 15 April 2014, Pages 174-181.
Yinhai Zhu, Peixue Jiang. Experimental and numerical investigation of the effect of shock wave characteristics on the ejector performance. International Journal of Refrigeration, Volume 40, April 2014, Pages 31-42.
Zhu, Yinhai; Liu, Bo; Jiang, Peixue. Experimental and Numerical Investigations on n-Decane Thermal Cracking at Supercritical Pressures in a Vertical Tube. ENERGY & FUELS 28(1): 466-474: JAN 2014.
Xiong Yanbin &, Zhu Yinhai, Jiang Peixue. Numerical Simulation of Transpiration Cooling for Sintered Metal Porous Strut of the Scramjet Combustion Chamber. Heat Transfer Engineering, 2014, 35(6-8)：721-729.
Zhu, Yinhai; Jiang, Peixue; Sun, Jiguo; Xiong, Yanbin. Injector head transpiration cooling coupled with combustion in H2/o2 subscale thrust chamber. Journal of Thermophysics and Heat Transfer, v 27, n 1, p 42-51, January-March 2013.
Zhu Yinhai, Jiang Peixue, Hybrid vapor compression refrigeration system with an integrated ejector cooling cycle，International Journal of Refrigeration，Volume 35, Issue 1, Pages 68-78, JAN 2012.
Yinhai Zhu, Yanzhong Li, Wenjian Cai. Control oriented modeling of ejector in anode gas recirculation solid oxygen fuel cell systems. Energy Conversion and Management. Volume 52, Issue 4, 2011, Pages 1881-1889.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Shock circle model for ejector performance evaluation. Energy Conversion and Management, Volume 48, Issue 9, September 2007, Pages 2533-2541.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Simplified ejector model for control and optimization. Energy Conversion and Management, Volume 49, Issue 6, June 2008, Pages 1424-1432.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Fuel ejector design and simulation model for anodic recirculation SOFC system. Journal of Power Sources, Volume 173, Issue 1, 8 November 2007, Pages 437-449.
Yinhai Zhu, Yanzhong Li. Three-dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-fin Heat Exchangers. ASME, Journal of Heat Transfer, NOVEMBER 2008, Vol. 130, Issue 11, Pages 111801-1–111801-8.
Yinhai Zhu, Yanzhong Li. Novel Ejector Model for Performance Evaluation on Both Dry and Wet Vapors Ejectors. International Journal of Refrigeration, Volume 32, Issue 1, January 2009, Pages 21-31.
Yinhai Zhu, Wenjian Cai, Yanzhong Li, Changyun Wen. Anode gas recirculation behavior of a fuel ejector in hybrid SOFC systems: Performance evaluation in three operational modes. Journal of Power Sources, Volume 185, Issue 2, 1 December 2008, Pages 1122-1130.
Yinhai Zhu, Wenjian Cai, Changyun Wen, Yanzhong Li. Numerical investigation of geometry parameters for design of high performance ejectors. Applied Thermal Engineering, Volume 29, Issues 5-6, April 2009, Pages 898-905.
Yinhai Zhu, Yanzhong Li. New theoretical model for convergent nozzle ejector in the proton exchange membrane fuel cell system. Journal of Power Sources, Volume 191, Issue 2, 15 June 2009, Pages 510-519.（SCI: 454HM；EI: 234）
Feng Yu, Yanzhong Li, Yinhai Zhu. Numerical and experimental investigation on the thermal insulation performance of low temperature cold box[J]. International Communication in Heat and Mass Transfer， Volume 36, Issue 9, November 2009, Pages 908-911.
祝银海,姜培学. 旁通型喷嘴喷射器的环隙结构对性能的影响[J]. 工程热物理学报,2015,11:2324-2327.
芦泽龙,严俊杰,祝银海,姜培学. 碳氢燃料在旋转通道中传热的数值模拟[J]. 工程热物理学报,2015,11:2498-2501.
严俊杰,祝银海,芦泽龙,姜培学. 超临界压力碳氢燃料瞬态加热响应特性[J]. 化工学报,2015,S1:65-70.
王夕,刘波,祝银海,姜培学,严俊杰,芦泽龙. 超临界压力下RP-3在细圆管内对流换热实验研究[J]. 工程热物理学报,2015,02:360-365.
黄拯,祝银海,熊宴斌,姜培学. 激波对超音速平板发汗冷却的影响[J]. 工程热物理学报,2014,11:2288-2293.
刘波,王夕,祝银海,姜培学. 超临界压力下正癸烷在微细圆管内对流换热实验研究[J]. 工程热物理学报,2014,(1) :114-118.
熊宴斌,姜培学,祝银海,等. 冷端边界条件对发汗冷却解析解的影响[J]. 清华大学学报(自然科学版),2013,(10) :1452-1458.
熊宴斌 &, 祝银海, 姜培学, 黄拯，刘元清. 单相液体发汗冷却规律实验研究. 航空动力学报. 2013, 28(9):1956-1961.
祝银海,姜培学,杨炜平,徐珊姝. 液体火箭发动机液氧箱与预冷回路的耦合计算模型. 工程热物理学报,2012,(5).
祝银海; 姜培学. 液体火箭推力室面板发汗冷却与燃烧耦合数值模拟. 工程热物理学报. 2012,(1).
Yinhai Zhu, Peixue Jiang. Geometry Optimization Study of Ejector in Anode Recirculation Solid Oxygen Fuel Cell System. Proceedings of the 2011 6th IEEE Conference on Industrial Electronics and Applications, ICIEA 2011. June 21, 2011 - June 23, 2011. Beijing, China.
Yinhai Zhu, Yanzhong Li, Wenjian Cai. Numerical modeling and analysis of ejector in the proton exchange membrane fuel cell system[C]. ICIEA 2009, 4th IEEE Conference on Industrial Electronics and Applications. 2009: 2859-2861.
Feng Yu, Yanzhong Li, Yinhai Zhu. Numerical and experimental investigation of the coupled heat transfer in cold box[C]. ICIEA 2009, 4th IEEE Conference on Industrial Electronics and Applications. 2009: 1315-1319.
Xianghua Cheng, Yanzhong Li, Erfeng Chen, Yinhai Zhu. Study on thermal stratification in rocket liquid oxygen tank with natural circulation precooling loop[C]. ICIEA 2009, 4th IEEE Conference on Industrial Electronics and Applications. 2009: 2971-2975.
Yinhai Zhu, Wenjian Cai, Changyun Wen. Development of control model for critical operation ejector. ICIEA 2007: 2007 Second IEEE Conference on Industrial Electronics and Applications.
祝银海; 厉彦忠. 板翅式换热器翅片通道中流体流动与传热的计算流体力学模拟. 化工学报, 2006年 05期.
祝银海; 厉彦忠; 余锋. 低温冷箱中辐射与导热耦合传热的数值模拟. 西安交通大学学报, 2005年 09期.
祝银海; 厉彦忠; 鱼剑琳; 蔡文剑. 喷射器的一种新模型及其实验验证. 西安交通大学学报, 2008年 09期42卷.
祝银海; 厉彦忠; 鱼剑琳; 蔡文剑. 基于制冷剂R141B的喷射器混合模型及其实验验证. 化工学报, 2008年 09期 59卷.
米廷灿; 厉彦忠; 王江; 祝银海. 一种计算板翅式换热器二次表面换热的新模型. 西安交通大学学报, 2004年 05期.
专利：
祝银海，姜培学. 一种喷射器. 发明专利. 批准号：3.6
姜培学，祝银海. 利用发汗冷却对超燃发动机燃料喷注支板的热防护方法. 发明专利. 批准号：1.7
姜培学，祝银海. 利用发汗与冲击冷却对超燃发动机喷注支板的热防护方法. 发明专利. 批准号：3.6