基本信息 办公电话：86- 电子邮件： qbfeng@bjtu.edu.cn
通讯地址：北京市海淀区西直门外上园村3号 邮编：100044

教育背景 1979.09~1983.07,合肥工业大学精密仪器系,获得工学学士学位；
1983.07~1986.04,合肥工业大学精密仪器系,获得工学硕士学位；
1990.02~1993.03,清华大学精密仪器及机械学系,获得光学仪器工学博士学位；
1998.10~1999.10,在University ofNorth Carolina at Charlotte留学访问1年。
工作经历 教学科研：
1986.04~1990.02 合肥工业大学精密仪器系助教；
1993.03~1995.10北方交通大学讲师；
1995.10~2000.10北方交通大学副教授；
2000.10~现在 北京交通大学教授、博士生导师、3级教授、2级教授。
管理经历：
2001.06~2005.05 理学院副院长；
2005.5~2017.12 理学院院长；
2008年~现在光学工程责任教授。
研究方向 光电检测与光电传感
光学工程(专业学位)
光电检测与信息处理
招生专业 光学工程硕士
光学工程博士
物理学硕士
科研项目 主持的纵向项目（50万以上）
国家自然科学基金重点项目：高速重载极端条件下轮对状态动态监测基础问题与关键技术研究，2020.1-2024.12.300万
国家重大科研仪器研制项目:面向五轴数控机床的激光高精度多参数快速综合测量仪研制与应用,2016.1-2020.12,845万.
国家自然科学基金“面上”：轮对几何参数在线测量方法与动态误差补偿的研究,2013.1-2016.12,80万.
国家自然科学基金“重点”：激光六自由度误差同时测量仪的研制，2011.1-2013.12,180万.
863项目:重载铁路桥梁和路基检测与强化技术-重载铁路路基静动力性能检测、连续检测、实时监测与状态评估技术研究,2009-2011,100万.
863项目：客运专线路基沉降全方位实时监测技术的研究,2007.12-2009.12,100万.
主持的主要横向项目 （50万元以上）
列车轮对智能检测及全寿命周期管理系统研发与产业化获东莞市第三批创新科研团队支持，总经费4000万，其中政府支持1000万.
北京交通大学：轨道交通检测仪器与设备研制,2016-2020,180万.
北京交通大学：声屏障检测技术,2014.7-2015.12,60万.
北京交通大学：机车轮对几何参数动态在线测量系统 ,2013.10--2014.6,100万.
北京交大创新科技中心：轨检车用专用激光线光源3，2011.12--2012.3.64万.
北京交大科技发展中心：非接触式静态轨道几何状态检测小车,2005.10-2006.02,96万.

教学工作 开设《光电检测技术》等本科生主干课程和《光学测量》博士生学位课，曾被学生评为最受欢迎的教师；
《大学物理实验》国家级精品资源共享课负责人；
共招收博士研究生27名，其中17名毕业获得博士学位；共招收59名硕士研究生，其中53毕业获得硕士学位；近四年共指导优秀本科生22名，大部分学生到清华、北大等著名高校攻读博士学位；
2013年被评为北京市优秀教师。

论文/期刊 SCI检索期刊论文

Run Gao, Qixin He and Qibo Feng*. Railway Wheel Flat Detection System Based on a ParallelogramMechanism[J]. Sensors, 19(16):3614, 2019
Zheng, Fajia; Feng, Qibo*; Zhang, Bin; Li, Jiakun. A method forsimultaneously measuring 6DOF geometric motion errors of linear and rotary axesusing lasers[J]. Sensors, 19(8), 2019.
Jiakun Li, Qibo Feng*, Chuanchen Bao, Bin Zhang. Method for simultaneously anddirectly measuring all six-DOF motion errors of a rotary axis, Chinese OpticsLetters, 2019, 17(1): 011203-1~5
He, Qixin; Feng, Qibo; Li, Jiakun. Long-TermStable Online Acetylene Detection by a CEAS System with Suppression of CavityLength Drift[J]. Sensors,2019,19(3):
Bao, Chuanchen; Feng, Qibo* Li, Jiakun. SimultaneousMeasurement Method and Error Analysis of the Six Degrees-of-Freedom MotionErrors of a Rotary Axis[J], APPLIED SCIENCES-BASEL,2018,(11) 2232.
Zhihong Gao, Qibo Feng*, Wenxi Zhang, Xinxin Kong,Boxia Yan, Yan Qi, Zhou Wu, Yang Li. Single longitudinal mode operation indiode-end-pumped wedge Nd:YVO4 laser[J], Optics Communications 424 (2018)131–136.
Chuanchen Bao , JiakunLi, Qibo Feng and Bin Zhang.Error-compensation model for simultaneous measurement of fve degrees of freedommotion errors of a rotary axis [J], Measurement Science and Technology, 29(2018) 075004 (10pp).
Li, Jiakun; Feng, Qibo*; Bao, Chuanchen; Zhao,Yuqiong. Method for simultaneous measurement of five DOF motion errors of arotary axis using a single-mode fiber-coupled laser[J], Optics Express,2018,26(3): 2535-2545.
Guang Chen, Qibo Feng*, Keqin Ding, and Zhan Gao.Subpixel displacement measurement method based on the combination of particleswarm optimization and gradient algorithm. Optical Engineering, 2017, 56(10): 104101.
YuqiongZhao, Bin Zhang, and Qibo Feng. Measurementsystem and model for simultaneously measuring 6DOF geometric errors. OpticsExpress, 2017, 25(18): 20993-21007.
GuangChen, Qibo Feng, and Keqin Ding.Methods and Systems for High-temperature Strain Measurement of the Main SteamPipe of a Boiler of a Power Plant While in Service. Journal of the OpticalSociety of Korea, 2016, 20(6):770-777.
BinZhang, Qibo Feng, and Yunfeng Liang.Interferometer with bismuth silicon oxide crystal for vibration measurement.Optical Engineering, 2016, 55(9): 091406.
YuqiongZhao, Qibo Feng*, Bin Zhang, andCunxing Cui. Influence of beam radii on a common-path compensation method forlaser beam drifts in laser collimation systems. Measurement Science andTechnology, 2016, 27(8): 084013.
XiaojingGao, Bin Zhang, Qibo Feng, Xin Xie, andLianxiang Yang. Nano-vibration measurements using the photoelectromotive forceeffect in the GaAs crystal. Instruments and Experimental Techniques, 2016, 59(3): 470-475.
CunxingCui, Qibo Feng*, Bin Zhang, andYuqiong Zhao. System for simultaneously measuring 6DOF geometric motion errorsusing a polarization maintaining fiber-coupled dual-frequency laser. OpticsExpress, 2016, 24(6): 6735-6748.
JingWang, Qibo Feng*. Residual stressdetermination of rail tread using a laser ultrasonic technique. Laser Physics, 2015, 25(5): 056104.
CunxingCui, Qibo Feng*, and Bin Zhang.Compensation for straightness measurement systematic errors in sixdegree-of-freedom motion error simultaneous measurement system. Applied Optics,2015, 54(11): 3122-3131.
JingWang, Qibo Feng*. Convergingultrasonic shear-vertical waves generated by a double-line laser and itsapplication for surface defect detection. Japanese Journal of Applied Physics, 2015, 54(4): 046602.
YongLv, Qibo Feng*, Lishuang Liu,Qingrui Yi, and Yueqiang Li. Application of optical switch in precisionmeasurement system based on multi-collimated beams. Measurement, 2015, 61:216-220.
ShuaiGao, Bin Zhang, Qibo Feng, CunxingCui, Shiqian Chen, and Yuqiong Zhao. Errors crosstalkanalysis and compensation in the simultaneous measuring system forfive-degree-of-freedom geometric error. Applied Optics, 2015, 54(3): 458-466.
YushengZhai, Zhifeng Zhang, Yuling Su, Xinjie Wang, and Qibo Feng. A high-precision roll anglemeasurement method. Optik, 2015, 126(24):4837-4840.
TongZhang, Qibo Feng*,Cunxing Cui, and Bin Zhang. Research on error compensationmethod for dual-beam measurement of roll angle based on rhombic prism.Chinese Optics Letter, 2014, 12(7): 071201.
Shengjia Wang, Zhan Gao,Guangyu Li, Ziang Feng, and Qibo Feng.Continual mechanical vibration trajectory tracking based on electro-opticalheterodyne interferometry. Optics Express, 2014, 22(7): 7799-7810.
Yan Gao, Qibo Feng*, and Jianying Cui. A simplemethod for dynamically measuring the diameters of train wheels using aone-dimensional laser displacement transducer.Optics and Lasers in Engineering, 2014, 53:158-163.
Qibo Feng*,Bin Zhang, Cunxing Cui, Cuifang Kuang, Yusheng Zhai, and Fengling You.Development of a simple system for simultaneously measuring 6DOF geometricmotion errors of a linear guide. Optics Express, 2013, 21(22): 25805-25819.
JingYang, Qibo Feng*. A new method formeasuring subgrade settlement in high-speed railway by using a linear CCD. Measurement,2013, 46(5): 1751-1756.
Sijin Wu, Lianqing Zhu, Qibo Feng, and Lianxiang Yang. Digitalshearography with in situ phase shift calibration.Optics and Lasers in Engineering, 2012, 50(9):1260-1266.
YushengZhai, Qibo Feng*,and Bin Zhang. A simple roll measurement method based on arectangular-prism. Optics and Laser Technology, 2012, 44(4): 839-843.
ZhanGao, Yan Deng, Yiting Duan, Zhifeng Zhang, Cheng Wei，Shiqian Chen, JianyingCui, and Qibo Feng. Continualin-plane displacement measurement with temporal wavelet transform specklepattern interferometry. Review of Scientific Instruments, 2012, 83(1): 015107.
Shengwei Ren, Shiping Gu,Guiyang Xu, Zhan Gao, and Qibo Feng*.A new track inspection car based on a laser camera system.Chinese Optics Letters, 2011, 9(3): 031202.
FenglingYou, Bin Zhang, and QiboFeng. A novel laser straightness measurementmethod with beam bend compensation. Optik, 2011, 122(17): 1530-1534.
Meng Zheng, Qibo Feng*, Zhan Gao, Shuangyun Shao， Keqin Ding. Experiments and analyses of anew type optical system for computed radiography.Chinese Optics Letters, 2010, 8(8): 800-803.
Zhan Gao, Qibo Feng, Sijin Wu, Fei Cheng,Jianying Cui, Shiqian Chen, Shiqing Jia, and Jianjun Liu. Track irregularityinspection trolley based on fiber-optic gyro.Journal of Micro-Nanolithography Mems and Moems, 2010, 9(1): 013045.
BenyongChen, Enzheng Zhang, Liping Yan, Chaorong Li, Wuhua Tang, and Qibo Feng. Alaser interferometer for measuring straightness and its position based on heterodyneinterferometry. Review of ScientificInstruments, 2009, 80(11): 115113.
Jinyun Ding, Qibo Feng*, Lianqing Zhang, and ShulianZhang. Laser frequency splitting method for high-resolution determination ofrelative stress-optic coefficient and internal stresses in Nd:YAG crystals.Applied Optics, 2008, 47(30): 5631-5636.
Qibo Feng*, Bin Zhang, and Cuifang Kuang. Four degree-of-freedomgeometric error measurement system with common-path compensation for laser beamdrift. International Journal of Precision Engineering and Manufacturing, 2008, 9(4): 26-31.
Zhifeng Zhang, Qibo Feng*, Zhan Gao, Cuifang Kuang,Cheng Fei, Zhang Li, and Jinyun Ding. A new laser displacement sensor based ontriangulation for gauge real-time measurement.Optics and Laser Technology, 2008, 40(2):252-255.
CuifangKuang, En Hong, Qibo Feng, BinZhang, and Zhifeng Zhang. Anovel method to enhance the sensitivity for two-degrees-of-freedom straightnessmeasurement. Measurement Science and Technology, 2007, 18(12): 3795-3800.
CuifangKuang, En Hong, and Qibo Feng*. High-accuracy method for measuringtwo-dimensional angles of a linear guideway. Optical Engineering,2007, 46(5): 051016.
CuifangKuang, Qibo Feng, Bin Zhang, BinLiu, Shiqian Chen, and Zhifeng Zhang. A four-degree-of-freedomlaser measurement system (FDMS) using a single-mode fiber-coupled laser module.Sensors and Actuators A: Physical, 2005, 125(1):100-108.
Qibo Feng*,Bin Zhang, and Cuifang Kuang. A straightness measurementsystem using a single-mode fiber-coupled laser module. Optics and LaserTechnology, 2004, 36(4): 279-283.

专著/译著 1.冯其波，谢芳，张斌，高瞻，邵双运 编著《光学测量技术与应用》，清华大学出版社，2008.5，ISBN 978-7-302-17136-2.
2.焦明星，冯其波，王鸣，刘君 编著.《激光传感与测量》，科学出版社，普通高等学校“十二五"规划教材,2014.6，北京. ISBN 978-7-03-040664-4.
3.参编英文专著《Laser Scanning, Theory and Applications》：Chapter 28.P543~566，“A New Laser ScanningSystem for Computed Radiography”.ISBN:978-953-307-205-0. INTECH，2011.04
专利 1.Feng Qibo, ZhangBin,Gao Zhan, Cui Cunxing. Laser Measurement System and Method for Measuring 21GMES, United States Patent，US ** B2, May 29,2018. 2.Feng Qibo, ZhangBin,Gao Zhan, Cui Cunxing. 6DOF Error Laser Simultaneous Measurement SystemWith A Single Polarization Maintanence Fiber Coupling and Transimitting theDual-Frenquency Laser, United States Patent, US **B2, Jan 2,2018.
3.冯其波;杨婧;利用光学方法的声屏障状态测量装置、系统和方法;CN0.X;2015.03.27.
4.冯其波;高岩;邵双运;崔建英;一种非接触式车轮直径动态测量装置及其测量方法;CN7.3;2014.01.064.
5.冯其波,杨婧.一种无缝钢轨纵向、横向位移同时测量装置、系统及其方法.8.8
6.冯其波,杨婧.一种路基表面沉降远程多点监测系统与方法.5.0
7.冯其波,杨婧,张斌.一种自适应扫描路基沉降远程监测装置与方法.3.9
8.冯其波,杨婧.钢轨参数自动测量装置、系统及其方法.8.X
9.冯其波,张斌,崔建英,陈士谦,颊东耀,高瞻,邵双远.路基分层垂直沉降与横向位移自动监测装置及其监测方法.4.X
10.冯其波,杨婧.一种利用激光远程测量路基沉降的装置与方法.3.1
11.冯其波,翟玉生,张斌.一种基于光栅的滚转角测量方法与装置.3.3
12.冯其波,张志峰,陈士谦,崔建英.基于激光的车轮直径非接触式动态测量装置及其方法.9.8
13.冯其波,高瞻.利用激光自动监测钢轨参数的装置、系统及其方法.7.4
14.冯其波.一种自动测量光线漂移角的激光准直系统与准直方法.1.9
15.冯其波.一种激光多自由度测量系统与方法..X
16.冯其波.一种激光测量车辆运动姿态的方法..1

















软件著作权
获奖与荣誉 1.北京市优秀教师，2013年.
2.重载铁路桥梁和路基检测与强化技术,教育部科学技术进步一等奖【排名第2】,2012年.
3.工业射线数字成像管道缺陷检测技术研究与设备研制,国家质量监督检验检疫总局科技兴检奖二等奖【排名第3】,2010年.



社会兼职 1.第一届、第二届中国仪器仪表学会设备结构健康监测与预警分会 副理事长；
2.中国仪器仪表学会光机电技术与系统集成分会副理事长；
3.中国计量测试学会计量仪器专业委员会副主任委员；
4.第六、七届中国计量测试学会理事会 常务理事；
5.第一届光学工程学会 理事；
6.全国光电测量标准化委员会 委员。