关键词: 势流理论/
并联入水/
非对称入水空泡/
空泡演化模型
English Abstract
Dynamic characteristics of parallel water-entry cavity based on potential flow theory
Song Wu-Chao,Wei Ying-Jie,
Lu Li-Rui,
Wang Cong,
Lu Jia-Xing
1.School of Astronautics, Harbin Institute of Technology, Harbin 150001, China
Fund Project:Project supported by the National Natural Science Foundation of China (Grant No. 11672094).Received Date:17 July 2018
Accepted Date:11 September 2018
Published Online:20 November 2019
Abstract:During the water-entry of the parallel axisymmetric bodies, the water-entry cavities are asymmetrical due to the mutual interference between the cavities. In the current study of the cavity dynamic models, the relatively perfect models of axially symmetric dynamic calculation of low speed single water entry have been established. These models mainly focus on the evolution of cavitation, and thus simplifying the flow pattern. However, due to the particularity of parallel water, the fluid forms a relative flow during the evolution of the cavitation in the inner region of the axisymmetric body axis. As a result, the flow is no longer axisymmetric but develops into a complex three-dimensional flow with strong nonlinearity, making the the theoretical model more difficult to establish. In order to analyze the evolution of the parallel cavities of the parallel axisymmetric body water-entry, the flow of the water-entry cavity interference region is simplified by the existing single water-entry calculation model based on the potential flow theory. The constraint of the relative flow to the cavity is simplified into a constraint potential, and the variation of cavity shape is analyzed. Based on the nonlinear hypothesis, the influence function is introduced to establish the calculation model of three-dimensional cavity and the three-dimensional evolution characteristics of parallel cavities are analyzed. The obtained results show that the velocity potential of the axisymmetric body water-entry can be regarded as the superposition of a point source and a line source located on the axis of the cavity. The expansion of the cavity is affected mainly by the point source, while the shrinkage of the cavity is influenced mainly by the line source. During the parallel water-entry of the axisymmetric body, the evolution of the parallel cavities in space is mirror symmetric and the mutual interference between cavities can be analyzed by introducing the potential wall surface. The potential wall has an inhibitory effect on the evolution of the cavities. The variation of the parallel water-entry cavity radius with the polar angle is related to the depth of the cavity cross section. In the inhibition evolution area near the closed point, the cavity radius decreases gradually with the increase of the polar angle, and the void section radius in the inhibition evolution region far from the closed point increases with the polar angle increasing, and is opposite to the radius law. In the shallower depth of the water-entry, the excessive evolution is formed in the expansion process of the cavity, and the excessive evolution will gradually weaken and disappear in the contraction process of the cavity.
Keywords: potential flow theory/
parallel water-entry/
asymmetric water-entry cavity/
cavity evolution model
