关键词: Li修饰硅烯/
氢存储/
吸附组分/
第一性原理
English Abstract
First-principles study of hydrogen storage properties of silicene under different Li adsorption components
Sheng Zhe,Dai Xian-Ying,
Miao Dong-Ming,
Wu Shu-Jing,
Zhao Tian-Long,
Hao Yue
1.State Key Discipline Laboratory of Wide Bandgap Semiconductor Technologies, School of Microelectronics, Xidian University, Xi'an 710071, China
Fund Project:Project supported by the Advance Research Foundation of China (Grant No. 9140A08020115DZ01024), the Fundamental Research Funds for the Central Universities of China (Grant Nos. XJS17061, JBX171102), the China Postdoctoral Science Foundation (Grant No. 2017M613061), and the 111 Project, China (Grant No. B12026).Received Date:22 December 2017
Accepted Date:14 March 2018
Published Online:20 May 2019
Abstract:Alkali metal has predicted to be a promising candidate for decorating silicene surface to obtain the high hydrogen storage capacity, owing to their physical properties of lightweight, lower cohesive energy, and appropriate strength of the interaction with H2 molecules. However, though the high potential in hydrogen storage of alkali metal adatoms-decorated silicene under the fixed adatom adsorption component is well known, the evidence for the hydrogen storage capacity of alkali metal adatoms-decorated silicene under different adatom adsorption components remains largely unexplored, which may be of great significance to make the most advantages of alkali metal adatoms-decorated silicene in hydrogen storage aspects. Herein, according to the first-principles calculation corrected by the van der Waals effect, we take Li-decorated silicene for example and perform the detailed study of the geometry structure, the stability and the hydrogen storage capacity of silicene under different Li adsorption components (LixSi1-x), aiming to maximize the hydrogen storage performance of Li-decorated silicene. The results show that the preferred site of Li changes from the hollow site to the valley site as the Li component increases from 0.11 to 0.50, and binding energy of Li is always greater than the corresponding cohesive energy, showing the high stability of Li-decorated silicene and the feasibility of the method to obtain a higher hydrogen storage capacity by increasing the Li component. The hydrogen storage of silicene under different Li adsorption components is investigated by the sequential addition of H2 molecules nearby Li atoms in a stepwise manner. It can be observed that the hydrogen storage capacity of Li-decorated silicene increases and the average adsorption energy decreases with the increase of the Li component. The corresponding hydrogen storage capacities of Li0.11Si0.89, Li0.20Si0.80, Li0.33Si0.67, Li0.43Si0.57 can reach up to 2.54 wt%, 4.82 wt%, 6.00 wt% and 9.58 wt% with 0.58 eV/H2, 0.47 eV/H2, 0.54 eV/H2 and 0.41 eV/H2 average adsorption energy, respectively. When the Li component increases up to 0.50, Li atoms are saturated with a maximum hydrogen storage capacity of 11.46 wt% and an average adsorption energy of 0.34 eV/H2, which well meet the hydrogen storage standard set by the U.S. Department of Energy and mean that the hydrogen storage can be theoretically improved by increasing the Li adsorption component to a saturated level. Furthermore, we analyze the Mulliken charge population, the charge density difference and the density of states, showing that the charge-induced electrostatic interaction and the orbital hybridization are the key factors for the hydrogen adsorption of Li-decorated silicene. Our results may enhance our fundamental understanding of the hydrogen storage mechanism and explore the applications in areas of hydrogen storage for Li-decorated silicene, which are of great importance for the usage of hydrogen in the future.
Keywords: Li-decorated silicene/
hydrogen storage/
adsorption component/
first-principles
