关键词: 光纤探针/
表面增强拉曼散射/
灵敏度
English Abstract
Application of cone-cylinder combined fiber probe to surface enhanced Raman scattering
Guo Xu-Dong,Tang Jun,
Liu Wen-Yao,
Guo Hao,
Fang Guo-Cheng,
Zhao Miao-Miao,
Wang Lei,
Xia Mei-Jing,
Liu Jun
1.North University of China, Key Laboratory of Instrumentation Science and Dynamic Measurement, Ministry of Education; Science and Technology on Electronic Test and Measurement Laboratory, Taiyuan 030051, China
Fund Project:Project supported by the Natural Science Foundation of China (Grant Nos.51225504,61571405),the Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi,and the Natural Science Foundation of North University of China (Grant No.110248-28140).Received Date:27 August 2016
Accepted Date:29 November 2016
Published Online:05 February 2017
Abstract:Owing to increasingly severe environmental pollution, food safety and other problems, higher and higher requirements for the detecting technique of poisonous and harmful biochemical molecules have been put forward. The conventional biochemical detector has the disadvantages of large size, high cost and inability to realize far-end and in-situ detection functions. Based on the requirements of the biochemical molecular detection technology for high sensitivity, miniaturization, far-end detection, insitu detection, real-time analysis and the like, a detection method using a fiber surface-enhanced Raman scattering (SERS) probe to carry out Raman signal detection has been put forward in recent years. The detection method not only realizes far-end and insitu detection functions, but also has a relatively high sensitivity. In this paper, a taper and cylinder combination type fiber probe is made by adopting a simple tube corrosion method, Under the situation of fixed temperature, cone-cylinder combined fiber probes with different diameters are obtained by controlling the corrosion time, and silver nanoparticles are bound to the surface of a silanized silicon dioxide fiber probe through electrostatic forces. Then, the sizes and morphologies of silver nanoparticles on the surface of the fiber probe are observed under a scanning electron microscope. Besides, the detection limit of a rhodamine 6G (R6G) solution is used to manifest both the activity and the sensitivity of the fiber probe, and the self-assembly time of the silver nanoparticles are further optimized to be 30 min and the diameter of the fiber probe to be 62 upm. When the concentration of a silver sol solution is constant, a high-sensitivity fiber SERS probe can be prepared. Through far-end detection, the detection limit of the R6G can reach 10-14 mol/L, and the enhancement factor is 1.36104. This work can serve as an experimental basis for a novel fiber surface-enhanced Raman scattering sensor in such aspects as high sensitivity and low cost. The studies of this paper are expected to provide an appropriate detection technique for rapid quantitative detection of biochemical molecules, and further provide a reference for various application fields of environmental monitoring and food safety analysis in future in terms of realizing rapid and accurate in-situ detection. Therefore, the fiber SERS probe has large application foreground in molecular detection.
Keywords: fiber probe/
surface enhanced Raman scattering/
sensitivity
