关键词: 轴平面成像/
光学微操纵/
光学俘获/
光学显微成像
English Abstract
Observation of particle manipulation with axial plane optical microscopy
An Sha1,2,Peng Tong1,2,
Zhou Xing1,2,
Han Guo-Xia1,
Huang Zhang-Xiang1,
Yu Xiang-Hua1,
Cai Ya-Nan1,2,
Yao Bao-Li1,
Zhang Peng1
1.State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an 710119, China;
2.University of Chinese Academy of Sciences, Beijing 100049, China
Fund Project:Project supported by the National Natural Science Foundation of China（Grant Nos. 11574389, 81427802).Received Date:21 July 2016
Accepted Date:06 September 2016
Published Online:05 January 2017
Abstract:Optical micromanipulation of particles based on the optical trapping effect induced by the interaction between light and particles has been successfully applied to many interdisciplinary fields including biomedicine and material sciences. When particles are trapped in three dimensions, the conventional wide-field optical microscopy can only monitor the movement of the trapped particles in a certain transverse plane. The ability to observe the particle movement along light trajectories is limited. Recently, a novel method named axial plane optical microscopy(APOM) has been developed to directly image the axial plane that is parallel to the optical axis of an objective lens. The APOM observes the axial plane by converting the axial information of a sample into that of a transverse plane by using a 45°-tilted mirror. In this paper, we propose and demonstrate that the APOM serves as an effective tool for observing the axial movement of particles in optical tweezers. By combining with a conventional wide-field optical microscopy, we show that both transverse and axial information can be acquired simultaneously for the optical micromanipulation. As in our first experimental demonstration, we observe two particles which are trapped and aligned along the optical axis. From the transverse image, only one particle is observable, and it is difficult to obtain the information along the axial direction. However, in the axial plane imaging, the longitudinal dipolar structure formed by the two particles is clearly visible. This clearly demonstrates the APOM imaging capability along the axial axis. The numerically simulations on the trapping focal spot against the position of a collimating lens agree well with our experimental APOM results. Furthermore, we directly observe the dynamic capture process of a single trapped particle in transverse plane by conventional wide-field optical microscopy as well in axial plane by the APOM, and can obtain the 3D information rapidly and simultaneously. We point out that the observable axial dynamic range is about 30 μm. Taking advantages of no requirement of scanning and data reconstruction, the APOM has potential applications in many fields, including optical trapping with novel beams and 3D imaging of thick biological specimens.
Keywords: axial plane imaging/
optical micromanipulation/
optical trapping/
optical microscopy
