关键词: 二极管抽运/
高重复频率/
纳秒激光器/
高光束质量
English Abstract
High repetition rate and high beam quality joule level Nd: YAG nanosecond laser for Thomson scattering diagnosis
Qiu Ji-Si1,2,Tang Xiong-Xin1,2,
Fan Zhong-Wei1,
Chen Yan-Zhong1,2,
Ge Wen-Qi1,2,
Wang Hao-Cheng1,
Liu Hao1
1.Academy of Opto-Electronics, Chinese Academy of Sciences, Beijing 100094, China;
2.Zhong Ke He Guang (Tianjin) Research Institute of Applied Laser Technology Co., Ltd. Tianjin 300304, China
Fund Project:Project supported by the National Research and Development Projects for Key Scientific Instruments, China (Grant No. ZDYZ2013-2), the China Innovative Talent Promotion Plans for Innovation Team in Priority Fields (Grant No. 2014RA4051), and the Youth Innovation Promotion Association, CAS.Received Date:22 March 2016
Accepted Date:18 May 2016
Published Online:05 August 2016
Abstract:A joule-level Nd: YAG nanosecond laser of high repetition frequency and high beam quality is developed for Thomson scattering diagnosis. The laser is designed as a master oscillator power-amplifier system mainly including single longitudinal mode seed, pre-amplifier unit and energy extraction unit. The single-longitudinal-mode Q-switched laser of a high stability is taken as the seed laser of output pulse at J level. The pre-amplifier unit amplifies the J-level pulse laser beam into hundreds of mJ level. In order to obtain the high-quality laser beam output, phase conjugation is adopted to compensate for the laser beam distortion. The ultra-filtered FC-770 is taken as an SBS gain medium of 0.0011 cm-1 absorption coefficient, 197.9 GW/cm2 optical breakdown threshold and 3.5 cm/GW gain coefficient. The double-pass amplification of SBS phase conjugation could realize a real-time repair towards the non-uniformity, deformation and wavefront aberration caused by thermal distortion of the optical components and the laser amplifier to achieve the uniform amplified beam output of high quality close to the diffraction limit. In the energy extraction unit, the amplifier of large-diameter slab is used for energy amplification. The size of the slab is 7 mm 35 mm138.2 mm of 56 cutting angle and 0.6% Nd3+ doping concentration. The slab is plated by a layer of SiO2 against light leak. Horizontal pumping mode is adopted. And the slow axis of the laser diode is almost the same as the length of the slat and the direction of laser transmission. The single-plane array is composed of 8 groups of vertical stacks and each group consists of 12 laser diode bars of power 200 W. At 200 Hz repetition frequency, 250 s pump pulse width and 140 A pump current, the up to 2.3 J stored energy can be achieved The energy extraction unit achieves high gain amplification and finally outputs high-quality laser beam. Under the condition of 200 Hz high repetition frequency and 8.23 J single pulse energy injected by the single longitudinal mode seed, 1.85 J output energy is gained. The energy extract efficiency of the laser system is 52.46%. The output laser possesses a pulse width of 5.36 ns, a far field beam spot 1.72 times the diffraction-limited value, and 1.3% energy stability (RMS).
Keywords: diode-pumped/
high repetition/
nanosecond laser/
high beam quality
