关键词: 垂直腔面发射激光器/
芯片级原子钟/
高温/
相干布居囚禁
English Abstract
894 nm high temperature operating vertical-cavity surface-emitting laser and its application in Cs chip-scale atomic-clock system
Zhang Xing1,Zhang Yi2,
Zhang Jian-Wei1,
Zhang Jian1,
Zhong Chu-Yu1,3,
Huang You-Wen1,3,
Ning Yong-Qiang1,
Gu Si-Hong2,
Wang Li-Jun1
1.State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2.Key Laboratory of Atomic Frequency Standards, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071, China;
3.University of Chinese Academy of Sciences, Beijing 100049, China
Fund Project:Project supported by National Natural Science Foundation of China (Grant Nos. 61434005, 61474118, 11304362), National Science and Technology Major Project of the Ministry of Industry and Information Technology of China (Grant No. 2014ZX04001151), Jilin Scientific and Technological Development Program, China (Grant Nos. 20150203011GX, 20140101203JC), and Changchun Science and Technology Project, China (Grant Nos. 14KG006, 15SS02, 13KG22).Received Date:04 March 2016
Accepted Date:20 April 2016
Published Online:05 July 2016
Abstract:In this study, an 894 nm high temperature vertical-cavity surface-emitting laser (VCSEL) is reported. Furthermore, a Cs chip-scale atomic clock (CSAC) system experiment based on this VCSEL is carried out.To achieve low threshold/power consumption under high temperature condition, the VCSEL epitaxial structure is optimized. Especially, the so-called gain cavity-mode detuning technology is utilized to improve the temperature sensitivity of the device output characteristics. The relationship between the structure of quantum well and the gain is simulated by using the commercial software PICS3D. In order to achieve high gain and low threshold properties, the thickness of the quantum well is optimized. Based on the theory of transmission matrix, the VCSEL cavity mode (etalon) is calculated. Finally, a -15 nm quantum well gain-cavity mode offset is utilized to achieve relatively stable cavity mode gain, which can guarantee the temperature-insensitivity of the VCSEL output characteristics.The output performance of the VCSEL device we fabricated is investigated experimentally. The VCSEL lightcurrent (L-I) characteristic is tested under different temperatures. It is found that benefiting from the gain-cavity mode offset design, the threshold can be maintained at 0.200.23 mA when the temperature increases from 20 ℃ to 90 ℃. Meantime, the output power of more than 100 W is achieved at different temperature levels. By comparing with the results at room temperature, No dramatic degradation of the VCSEL high temperature L-I characteristics is found, which means that the VCSEL output characteristic is relatively temperature-insensitive. The wavelength of the VCSEL is 890.4 nm at a temperature of 20 ℃. When the temperature increases up to 85.6 ℃, the VCSEL wavelength is red-shifted to 894.6 nm (Cs D1 line), corresponding to a red shift ratio of 0.064 nm/℃. According to the polarization requirement of CSAC applications, the polarization properties of the VCSEL are studied and the results are as follows: under an injected current of 1 mA and operation temperature of 20 ℃, Pmax = 278.2 W and Pmin = 5.9 W, corresponding to a polarization ratio of 47:1; at a temperature of 85.6 ℃, Pmax = 239.2 W and Pmin = 4 W, corresponding to a polarization ratio of 59:8:1.Using the VCSEL reported in this paper as a laser source, the CSAC experiment is carried out. At 4.596 GHz of modulated frequency, the output laser of the VCSEL is collimated and interacts with Cs atoms. Finally the closed-loop frequency locking atomic clock is demonstrated. The Cs laser absorption spectrum for laser frequency stabilization, as well as the CPT signal for Cs CSAC microwave frequency stabilization is obtained.
Keywords: vertical-cavity surface-emitting laser/
Cs chip-scale atomic clock/
high temperature/
coherent population trapping
