任峰1, 2,
卢志鹏1, 2,
张永清1,
张申金3,
杨峰3,
卫东4,
邯娇1,
李阳1
1.中国科学院电子学研究所高功率微波源与技术实验室 ??北京 ??100190
2.中国科学院大学 ??北京 ??100039
3.中国科学院理化技术研究所功能晶体与激光技术重点实验室 ??北京 ??100190
4.北京中科科仪股份有限公司 ??北京 ??100190
基金项目:国家重大科学仪器设备开发专项(2012YQ120048)
详细信息
作者简介:阴生毅：男，1964年生，研究员，研究方向为大电流密度阴极及其发射机理
任峰：男，1992年生，硕士生，研究方向为热扩散阴极微区热电子发射特征及阴极发射材料
卢志鹏：男，1993年生，博士生，研究方向为高性能热场发射阴极及其发射机理
张永清：女，1965年生，研究员，研究方向为微波衰减材料、大功率速调管制管工艺及技术
张申金：男，1978年生，副研究员，研究方向为全固态激光技术及非线性频率变换技术
杨峰：男，1983年生，副研究员，研究方向为全固态激光及其频率变换技术
卫东：男，1988年生，工程师，研究方向为电子光学
邯娇：女，1986年生，中级工程师，研究方向为可靠性热子材料与工艺
李阳：男，1990年生，初级工程师，研究方向为阴极制备工艺
通讯作者:阴生毅 ysy210@163.com
中图分类号:O462计量
文章访问数:740
HTML全文浏览量:195
PDF下载量:15
被引次数:0
出版历程
收稿日期:2017-10-25
修回日期:2018-06-14
网络出版日期:2018-07-30
刊出日期:2018-10-01
Study on Electron Emission Phenomenon of the Surface Micro Area of Coated Impregnated Dispenser Cathode
Shengyi YIN1,,,Feng REN1, 2,
Zhipeng LU1, 2,
Yongqing ZHANG1,
Shenjin ZHANG3,
Feng YANG3,
Dong WEI4,
Jiao HAN1,
Yang LI1
1. Key Laboratory of High Power Microwave Sources and Technology, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China
2. University of Chinese Academy of Sciences, Beijing 100039, China
3. Key Laboratory of Functional Crystals and Laser Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China
4. KYKY Technology Co., Ltd, Beijing 100190, China
Funds:The National Instrumentation Program of China (2012YQ120048)
摘要
摘要:覆膜对浸渍扩散热阴极表面电子发射的影响一直是热阴极研究领域的重点课题。该文采用最新研制的深紫外激光光发射电子显微镜/热发射电子显微镜(DUV-PEEM/TEEM)，对一半覆膜、另一半未覆膜的浸渍扩散阴极试样作了1150 ℃×2 h激活，并对其表面微区的热电子发射像及其随温度的变化作了比较。结果发现，两种阴极的热电子发射均主要位于孔隙及其邻近颗粒边缘；随温度升高，未覆膜阴极发射主要集中于孔隙内及周边有限区域内，发射面积增量较小，覆膜则使阴极有效发射区域得以由孔隙及其边缘向距孔隙更远的区域延伸，发射面积大幅增加。上述结果首次给出了覆膜浸渍扩散阴极微区的电子发射特征，对于理解该类型阴极发射机理有一定参考价值。
关键词:覆膜浸渍扩散阴极/
电子发射/
微区/
光发射电子显微镜
Abstract:The impact on impregnated cathode electronic emission, when it is coated by films, is an important studied content in the field of thermionic cathode. A cathode sample is evenly split by impregnated dispenser cathode and coated impregnated dispenser cathode. The sample is activated at 1150 ℃ in the Deep UltraViolet laser Photo- and Thermal- Emission Electron Microscope system (DUV-PEEM/TEEM) for 2 hours. In this system, the micro- electron emission phenomenon of two cathode and its changes with temperature are compared and studied directly. The results show that the electronic emission of both impregnated cathode and coated impregnated cathode are mainly located at the pores and the edge of the adjacent particles; Along with the rise of cathode's temperature, the cathode emission without coating anything is still mainly focused on the pores and nearby narrow regions on cathode surface, that the emission area changed a little. However, for the coated impregnated dispenser cathode, the effective emission area is extended from the pores and its edge to the area far away from the pores. These results for the first time give the electron emission characteristics for impregnated cathode coated with film, which have certain reference value to understand the emission mechanism of this cathode.
Key words:Impregnated dispenser cathode/
Electron emission/
Surface micro area/
Photoemission electron microscope
PDF全文下载地址:
https://jeit.ac.cn/article/exportPdf?id=00049409-3be0-407b-a4da-ee2a59615097
