丁泽刚,,
肖枫,
王岩,
李喆
北京理工大学信息与电子学院雷达技术研究所 北京 100081
北京理工大学嵌入式实时信息处理技术北京市重点实验室 北京 100081
基金项目:国家****科学基金(61625103)，国家自然科学基金(11833001)
详细信息
作者简介:龙腾：龙 腾(1968–)，男，湖北黄陂人。北京理工大学教授、博士生导师。现任北京理工大学副校长、雷达技术研究所所长。研究方向为新体制雷达与实时信息处理。E-mail: longteng@bit.edu.cn
丁泽刚(1980–)，男，河南信阳人，博士。现担任北京理工大学研究员、博士生导师，主要研究方向为新体制雷达成像机理、成像处理和图像信息提取。E-mail: z.ding@bit.edu.cn
肖枫：肖 枫(1993–)，男，内蒙古包头人。北京理工大学雷达技术研究所在读博士研究生，主要研究领域为多模式星载SAR成像技术、SAR运动补偿技术。E-mail: 1120646612@qq.com
王岩：王 岩(1989–)，男，河北沧州人。博士后，现担任北京理工大学副研究员、硕士生导师，主要研究方向为新体制雷达系统、成像、干涉和极化应用。E-mail: yan_wang@bit.edu.cn
李喆：李 喆(1996–)，男，河北任丘人。北京理工大学信息与电子学院硕士研究生，主要研究方向星载合成孔径雷达系统设计与成像。E-mail: 3120180770@bit.edu.cn
通讯作者:龙腾 longteng@bit.edu.cn
丁泽刚 z.ding@bit.edu.cn
中图分类号:TN958计量
文章访问数:1903
HTML全文浏览量:955
PDF下载量:335
被引次数:0
出版历程
收稿日期:2019-08-30
修回日期:2019-12-01
网络出版日期:2019-12-30
Spaceborne High-resolution Stepped-frequency SAR Imaging Technology
LONG Teng,,DING Zegang,,
XIAO Feng,
WANG Yan,
LI Zhe
Radar Research Lab, School of Information and Electronics, Beijing Institute of Technology, Beijing 100081, China
Beijing Key Laboratory of Embedded Real-Time Processing Technology, Beijing 100081, China
Funds:The National Science Foundation for Distinguished Young Scholars (61625103), The National Natural Science Foundation of China (11833001)
More Information
Corresponding author:LONG Teng, longteng@bit.edu.cn;DING Zegang, z.ding@bit.edu.cn
摘要
摘要:星载合成孔径雷达(SAR)是一种2维高分辨率微波成像雷达。它通过发射大带宽信号实现距离向高分辨，通过合成孔径技术实现方位向高分辨。随着人们对分辨率需求的不断提升，星载SAR正朝着分米级分辨率发展。一方面，受限于现有器件水平，可以通过频率步进技术实现大带宽信号发射，需要研究高精度子带拼接技术、子带间幅相误差对成像的影响与补偿技术；另一方面，受限于有限的波束宽度，可以使系统工作在聚束模式或滑聚模式实现长合成孔径，此时需研究轨道弯曲、“Stop-go”假设误差、电离层与对流层传输误差等非理想因素对成像的影响与补偿技术。因此，该文详细介绍了频率步进信号时序设计与子带拼接，研究星载高分辨率频率步进SAR成像算法与非理想因素补偿方法，最后给出成像算法的仿真验证和性能分析。
关键词:频率步进/
高分辨成像/
滑动聚束
Abstract:Spaceborne Synthetic Aperture Radar (SAR) is a type of microwave imaging radar with 2D high resolution. This technological device achieves range high resolution by transmitting wideband signals and azimuth high resolution through the synthetic aperture approach. With the increasing demand for high-resolution imaging, the resolution of spaceborne SAR has moved toward the decimeter level. On the one hand, limited by the present hardware technology, achieving wideband signal transmission through stepped-frequency technology is necessary. In this case, we need to study high-precision bandwidth synthesis technology. The influence of slant range error and amplitude and phase error between sub-bands should be considered. On the other hand, due to limited beamwidth, the system needs to work in sliding spot mode to achieve a long synthetic aperture. In this case, we need to study the problem of imaging parameter variance caused by curved orbit, “Stop–go” error, and the influence of ionospheric and tropospheric transmission errors on imaging. To solve these problems, this paper introduces the principle of stepped-frequency signal design and bandwidth synthesis technology in detail. A time-domain algorithm and non-ideal factor compensation method are proposed for spaceborne high-resolution stepped-frequency SAR imaging. Finally, simulation verification and performance analysis of the imaging algorithm are conducted.
Key words:Stepped frequency/
High-resolution imaging/
Sliding-spotlight
PDF全文下载地址:
https://plugin.sowise.cn/viewpdf/198_ea1e58a5-bfe5-4f30-8f2a-60010b0a4001_R19076
