删除或更新信息，请邮件至freekaoyan#163.com(#换成@)

不锈钢折弯板裂纹Lamb波检测技术*

本站小编 Free考研考试/2022-01-02
-->
胡晓丹,周世圆,赵明华,于全朋.不锈钢折弯板裂纹Lamb波检测技术*[J].,2021,40(5):785-793
不锈钢折弯板裂纹Lamb波检测技术*
Detection of crack defects in stainless steel bending plates on Lamb wave
投稿时间：2020-12-12修订日期：2021-09-03
中文摘要:
金属弯板广泛应用于车辆、船舶、飞机等大型装备结构件中，折弯处易形成应力集中产生裂纹，直接影响构件的使用安全和寿命。本文开展了不锈钢弯板裂纹缺陷Lamb波检测技术研究，计算了钢板的频散曲线，优选三种不同频率的S0模态：0.25MHz、0.5MHz、1MHz。利用COMSOL软件建立频域仿真模型，模拟了Lamb波在3mm厚“L”形弯板内部的传播情况，开展折弯板裂纹缺陷检测实验，并使用小波包变换的方法对实验信号进行分析。结果表明，经小波变换后，0.25MHz、0.5MHz、1 MHz的S0模态Lamb波均可用于裂纹缺陷的识别检测.
英文摘要:
Metal bending plates are widely used in large equipment structures such as vehicles, ships, and airplanes. Stress concentration is easily formed at the bend and cracks are generated, which directly affects the safety and life of the components. In this paper, the Lamb wave detection technology for cracks in stainless steel bending plates is studied. The dispersion curve of the steel plate is calculated, and the S0 modes of 1MHz, 0.5MHz and 0.25MHz are optimized. The COMSOL simulation software was used to establish a frequency domain simulation model to simulate the propagation of Lamb waves in a 3mm thick "L"-shaped bent plate. The crack defect detection experiment of the bent plate was carried out. And the wavelet packet transform method was used to analyze the experimental signal. The results show that after wavelet transformation, 0.25 MHz, 0.5 MHz and 1 MHz S0 mode Lamb waves can be used for the identification and detection of crack defects.
DOI：10.11684/j.issn.1000-310X.2021.05.018
中文关键词:Lamb波裂纹检测COMSOL仿真小波包变换
英文关键词:Lamb wavecrack detectionCOMSOL simulationwavelet packet transform
基金项目:
作者单位E-mail
胡晓丹北京理工大学hxdby2017@126.com
周世圆北京理工大学redaple@bit.edu.cn
赵明华北京理工大学zhaominghua2020@163.com
于全朋北京理工大学yuubit@163.com
摘要点击次数:205
全文下载次数:169
查看全文查看/发表评论下载PDF阅读器
相关附件：修改说明1修改说明1修改说明2修改说明2修改说明3附件1校对稿附件2论文图
关闭








PDF全文下载地址:

http://yysx.cnjournals.cn/ch/reader/create_pdf.aspx?file_no=20251&flag=1&journal_id=yysx&year_id=2021
相关话题/北京理工大学 中文 英文 实验 论文

Free考研考试FreeKaoYan.Com
欢迎来到Free考研考试，"为实现人生的Free而奋斗"

© 2020 FreeKaoYan! . All rights reserved.