删除或更新信息，请邮件至freekaoyan#163.com(#换成@)

多层多孔吸声材料结构参数优化设计*

本站小编 Free考研考试/2022-01-02
-->
吴量,刘 淼,刘学文,熊鑫忠,庞金祥,张和伟.多层多孔吸声材料结构参数优化设计*[J].,2021,40(3):449-456
多层多孔吸声材料结构参数优化设计*
Optimal design of structural parameters of multi-layer porous sound-absorbing materials
投稿时间：2020-09-30修订日期：2021-05-07
中文摘要:
高开孔率的发泡材料如三聚氰胺、聚氨酯发泡材料具有优良的吸音、隔热防火、防腐及环保性能，可以作为吸音、阻尼等材料应用于建筑、航空、交通工具等领域。本文基于Biot理论和多层介质声波传播理论（传递矩阵法TMM），建立多层多孔吸声结构背衬刚性壁的理论模型，利用遗传算法优化多层结构厚度和质量。将理论模型计算结果与阻抗管测试结果进行对比，验证了理论模型的准确性。结果表明：优化后的多层多孔吸声结构在整体厚度降低18mm基础上，吸声能力并未降低，且部分结构低频吸声增强，结构的整体重量也有所降低，达到轻薄化的目标，具有很大应用价值。
英文摘要:
High-open-cell foam material, such as melamine and polyurethane foam material, has excellent performance in sound absorption, heat insulation, fire protection, anti-corrosion and environmental protection. Such kind of material can be used as sound-absorbing and damping material in construction, aviation, transportation and so on. Based on the Biot theory and acoustic wave propagation theory in multilayer media (transfer matrix method TMM), a theoretical model in terms of the multilayer porous sound-absorbing structure backed by a rigid wall was firstly established in this paper, then according to the genetic algorithm, corresponding optimization can be obtained in the thickness and quality of the multilayer structure. The calculation results of the theoretical model were compared with the test results achieved in impedance tube to verify the accuracy of the theoretical model. The results illustrate that when the overall thickness of the optimized multi-layer porous sound-absorbing structure has a reduction of 18mm, its sound absorption capacity will not change a lot. Meanwhile, the low-frequency sound absorption capacity in some parts is enhanced and the mass of the whole structure will decrease. Such kind of method is of great use in practical application since it achieves the goal of lightweight.
DOI：10.11684/j.issn.1000-310X.2021.03.017
中文关键词:多孔吸声材料多层结构轻量化Biot理论
英文关键词:Porous sound-absorbing materialmulti-layer structureLightweightBiot theory
基金项目:国家自然科学基金项目
作者单位E-mail
吴量上海工程技术大学635476666@qq.com
刘 淼上海工程技术大学机械与汽车工程学院
刘学文上海工程技术大学机械与汽车工程学院
熊鑫忠上海工程技术大学机械与汽车工程学院
庞金祥上海普信科技有限公司
张和伟上海普信科技有限公司
摘要点击次数:410
全文下载次数:430
查看全文查看/发表评论下载PDF阅读器
相关附件：图1 阻抗管与样品切割设备图2 多层结构顺序示意图图4 BCA结构优化前后测试结果图3 优化前后吸声系数仿真和测试结果图3 优化前后吸声系数仿真和测试结果修改稿（无批注版本）审稿人意见回复文件修改说明1修改说明1无批注修改稿逆推GUI程序介绍补充修改说明2图片压缩包
关闭








PDF全文下载地址:

http://yysx.cnjournals.cn/ch/reader/create_pdf.aspx?file_no=20090-2&flag=1&journal_id=yysx&year_id=2021
相关话题/结构 上海工程技术大学 汽车工程学院 机械 上海

Free考研考试FreeKaoYan.Com
欢迎来到Free考研考试，"为实现人生的Free而奋斗"

© 2020 FreeKaoYan! . All rights reserved.