常紫娟^1,2,3,,
魏伟^1,2,3,,,
符力耘⁴,
秦楠⁵,
苏俊^1,2,3,
孙伟家^2,3,6
1. 中国科学院地质与地球物理研究所, 中国科学院油气资源研究重点实验室, 北京 100029
2. 中国科学院地球科学研究院, 北京 100029
3. 中国科学院大学, 北京 100049
4. 中国石油大学(华东)深层油气重点实验室, 青岛 266580
5. 中国石油勘探开发研究院, 北京 100020
6. 中国科学院地质与地球物理研究所, 中国科学院地球与行星物理重点实验室, 北京 100029

基金项目: 国家重点研发计划深地专项项目（2016YFC0601100）资助


详细信息

作者简介: 常紫娟, 女, 1991年生, 硕士研究生在读, 研究方向为地震采集定量评价.E-mail:changzijuan@foxmail.com

通讯作者: 魏伟, 男, 1981年生, 副研究员, 主要研究领域为地震采集设计、数据预处理和偏移成像.E-mail:weiwei@mail.iggcas.ac.cn

中图分类号: P631

收稿日期:2019-05-02
修回日期:2020-07-05
上线日期:2020-10-05

Focal beam resolution analysis of wide-band, wide-azimuth and high-density land 3D seismic acquisition geometries

CHANG ZiJuan^1,2,3,,
WEI Wei^1,2,3,,,
FU LiYun⁴,
QIN Nan⁵,
SU Jun^1,2,3,
SUN WeiJia^2,3,6
1. Key Laboratory of Petroleum Resource Research, CAS, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China
2. Institutions of Earth Science, Chinese Academy of Sciences, Beijing 100029, China
3. University of Chinese Academy of Sciences, Beijing 100049, China
4. Key Laboratory of Deep Oil and Gas(China University of Petroleum(East China)), Qingdao 266580, China
5. The Research Institute of Petroleum Exploration and Development, Beijing 100020, China
6. Key Laboratory of Earth and Planetary Physics, CAS, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China


More Information

Corresponding author: WEI Wei,E-mail:weiwei@mail.iggcas.ac.cn

MSC: P631

--> Received Date: 02 May 2019
Revised Date: 05 July 2020
Available Online: 05 October 2020


摘要
摘要:近年来，"两宽一高"——宽频带、宽方位和高密度——三维地震采集技术极大地提升了地震勘探的能力和精度，在岩性油气藏地区取得了明显的应用效果，也对地震采集观测系统设计提出了更高的要求.如何在现有的成本限制和装备条件下，根据具体工区的地质地球物理条件来选择合适的"两宽一高"采集观测参数以实现最佳的勘探效益，已成为当前地震勘探中迫切需要解决的瓶颈问题之一.基于此，本文首先回顾了点绕射聚焦分析的基本原理，随后给出一种新的复杂介质多频率快速聚焦分辨率定量分析方法.基于该理论，我们以一个典型的陆上三维地震勘探采集方案和速度模型为例，系统地研究了"两宽一高"地震资料偏移成像分辨率随着关键采集参数的变化规律，给出了不同条件下分辨率的理论极限值及其所对应的采集参数的临界点值.此外，我们也提出了一种新的采集参数和子波频谱的交汇定量分析方法，进一步阐明了采集参数和子波频谱参数之间的定量关系，为复杂接收激发条件下采集观测系统设计提供了新的理论依据.
关键词: "两宽一高"地震采集/
聚焦分辨率分析/
成像清晰度

Abstract:Recent years, the wide-band, wide-azimuth and high-density 3D seismic acquisition technology not only has greatly improved the capability of land seismic exploration, and the accuracy of the complex reservoir identification, but also puts forward higher requirements for the seismic acquisition geometries design to improve the imaging quality while reducing its acquisition cost. However, it is difficult to select the optimal acquisition parameters for a given geological and geophysical condition, cost estimation and equipment level. Based on this, we first review the basic principle of fast multi-frequency focal beams theory, and then present a new quantitative analysis method and process of the imaging resolution and sharpness in a complex medium to select the optimal acquisition scheme from lots of alternatives. Based on a complex velocity model, we take a real land 3D seismic acquisition scheme as an example to study the effects of some key acquisition parameters on the imaging resolution and sharpness, and find their numerical limit. We also draw crossplots of the acquisition parameters and the frequency parameters, which could provide some new ideas for the acquisition geometries designing for the deep-layer seismic imaging with low peak frequency and limited frequency band.
Key words:Wide-band, wide-azimuth and high-density seismic acquisition/
Focal beam resolution analysis/
Imaging sharpness



PDF全文下载地址:

http://www.geophy.cn/data/article/export-pdf?id=dqwlxb_15640