王赟1,,,
孙鹏远2,
李添才3
1. 中国地质大学(北京)地球物理与信息技术学院, 地质过程与矿产资源国家重点实验室, 北京 100083
2. 东方地球物理公司, 河北涿州 072750
3. 中交铁道设计研究总院有限公司, 北京 100088
基金项目: 国家科技重大专项"多波地震勘探配套技术(2017ZX05018005),国家自然科学基金项目(41425017,U1839208)资助
详细信息
作者简介: 张安家, 男, 1976年生, 博士后, 2007年博士毕业于中国科学院地质与地球物理研究所, 现主要从事地震各向异性理论与应用及地震资料处理研究.E-mail:zhanganjia@sina.com
通讯作者: 王赟, 男, 1969年生, 博士, 教授、博士生导师, 1998年毕业于中国科学院地球物理研究所, 现从事地震各向异性理论与多分量地震技术的研究.E-mail:yunwang@mail.iggcas.ac.cn
中图分类号: P631收稿日期:2018-03-07
修回日期:2018-09-26
上线日期:2019-05-05
Equivalent HTI approximation and characteristics of anisotropy induced by multiple sets of vertical fractures
ZHANG AnJia1,,WANG Yun1,,,
SUN PengYuan2,
LI TianCai3
1. School of Geophysics and Information Technology, State Key Laboratory of Geological Process and Mineral Resources, China University of Geosciences, Beijing 100083, China
2. Bureau of Geophysical Prospecting Inc., Zhuozhou Hebei 072750, China
3. CCCC Railway Consultants Group Co., LTD, Beijing 100088, China
More Information
Corresponding author: WANG Yun,E-mail:yunwang@mail.iggcas.ac.cn
MSC: P631--> Received Date: 07 March 2018
Revised Date: 26 September 2018
Available Online: 05 May 2019
摘要
摘要:在裂缝诱导各向异性理论研究中通常使用等效HTI介质来近似多组裂缝所引起的综合效应.由于构造运动的复杂性,多组裂缝普遍存在于地壳与油气储层中.为了研究多组裂缝的地震属性特征,分析常用的等效HTI模型对于多组裂缝近似精度及附加裂缝对介质属性特征的影响,本文利用线性滑移模型进行了多组垂直裂缝的单斜各向异性等效介质理论计算,并利用空间搜索方法求取与其最为接近的HTI介质各向异性弹性参数.重点研究了在两种各向异性介质中纵波速度、快慢横波速度和极化特征及其差异,量化分析附加裂缝对于地震属性如速度、极化方向和走时等的影响,研究对附加裂缝敏感的地震属性.此研究结果和方法为进一步研究多组裂缝的反演及识别方法提供基础,同时对于将高阶对称性各向异性介质中已存在的计算方法应用于低阶对称性时的适用程度、精度分析及相关方法研究具有重要作用.
关键词: 多组裂缝/
单斜各向异性/
等效介质/
HTI
Abstract:Equivalent HTI medium is commonly used to approximate combined effects of multiple groups of fractures in theoretical study of fracture-induced anisotropy. Due to complex tectonic movement, multiple sets of fractures are prevailed in crust and oil and gas reservoirs. In order to study the seismic attributes and analyze the approximation accuracy of the equivalent HTI model for multiple sets of fractures, this study uses a linear slip model of the equivalent medium theory to calculate the monoclinic anisotropy for multiple sets of fractures and obtain the closest equivalent anisotropic elastic parameters of the HTI medium by scanning the shortest spatial distance. The differences in P wave velocity, fast and low shear wave velocity and polarization characteristics of the two types of anisotropic media are discussed in detail and quantitative analysis of the effects of additional cracks on seismic attributes such as velocity, polarization direction and travel time is conducted to find the most sensitive attribute to the existence of additional fractures. The results provide a basis for development of inversion methods of multiple sets of fractures and play an important role in the applicability, precision analysis and research on application of relevant existing methods as the high-order anisotropic symmetry is used to approximated the low-order symmetry.
Key words:Multiple sets of fractures/
Monoclinic anisotropy/
Equivalent medium/
HTI
PDF全文下载地址:
http://www.geophy.cn/data/article/export-pdf?id=dqwlxb_14981