中文关键词:硬模板真空辅助技术介孔材料复合金属氧化物甲苯氧化 英文关键词:Hard template methodVacuum assisted technologyMesoporous materialMetal complexToluene oxidation 基金项目:国家自然科学基金项目（21676028）和辽宁省自然科学基金项目（2019-ZD-0506）资助

作者	单位	E-mail
高子程	渤海大学化学化工学院 锦州 121013
刘晶	渤海大学化学化工学院 锦州 121013
夏云生	渤海大学化学化工学院 锦州 121013	xiayunsheng@126.com
包德才	渤海大学化学化工学院 锦州 121013

摘要点击次数:744 全文下载次数:0 中文摘要: 以有序介孔二氧化硅KIT-6为硬模板，硝酸钴、硝酸铈为金属源，分别在真空辅助条件和普通搅拌条件下制备了介孔CoCeO_x复合氧化物。采用XRD、SEM、TEM、N₂吸脱附等技术表征了复合氧化物的物化性质，并评价其氧化甲苯的性能。结果表明，在真空辅助和搅拌条件下制备的CoCeO_x氧化物是由Co₃O₄和CeO₂组成的介孔Co₃O₄-CeO₂复合氧化物，其比表面积分别为141和89 m²·g^-1，平均孔径分别为8.7和9.6 nm。真空辅助纳米复制过程有利于金属盐的前驱体充分填充到模板的孔隙中，去除模板后，可以得到有序的介孔复合金属氧化物。所制备介孔钴铈复合氧化物具有孔道有序性好、比表面积大的特点，在挥发性有机化合物的氧化去除方面具有一定的应用前景。 英文摘要: Using ordered mesoporous silica KIT-6 as hard template, cobalt nitrate and cerium nitrate as metal sources, mesoporous CoCeO_x composite oxides were prepared by impregnation, filling, calcination, template removal and drying under vacuum-assisted conditions and ordinary stirring conditions. The physical and chemical properties of the composite oxides were characterized by XRD, SEM, TEM and N₂ adsorption and desorption techniques. The oxidation performance of toluene was evaluated. The results show that the CoCeO_x oxides prepared under vacuum-assisted and stirring conditions are mesoporous Co₃O₄-CeO₂ composite oxides composed of Co₃O₄ and CeO₂. Their specific surface areas are 141 and 89 m²·g^-1, respectively. The average pore sizes are 8.7 and 9.6 nm, respectively. The vacuum-assisted nano-replication process is conducive to the full filling of metal salt precursors into the pores of template KIT-6. The prepared mesoporous cobalt-cerium composite oxide has the characteristics of good pore order and large specific surface area, and has certain application prospects in the oxidation removal of volatile organic compounds. 查看全文查看/发表评论下载PDF阅读器 相关附件：版权转让声明书答复信 -->