删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

离子聚合物微球负载钯催化甲酸分解产氢

本站小编 Free考研考试/2021-12-27

中文关键词:氢气甲酸树枝聚合物离子聚合物钯催化剂 英文关键词:HydrogenFormic acidDendrimerIonic polymerPd-based catalyst 基金项目:
作者单位E-mail
邵守言江苏索普(集团)有限公司 镇江 212006
朱桂生江苏索普(集团)有限公司 镇江 212006
黄志军中国科学院化学研究所 北京 100190
王忠华江苏索普(集团)有限公司 镇江 212006wangzhong_hua198@163.com
闫丰文中国科学院化学研究所 北京 100190
摘要点击次数:560 全文下载次数:0 中文摘要: 催化甲酸分解产氢是氢气储存和氢能利用的重要途径。以对4-乙烯基吡啶和1,3,5-三(溴甲基)-2,4,6-三甲基苯为原料,通过季铵化和聚合制备了树枝状离子聚合物微球,负载Pd纳米粒子后用于催化甲酸分解产氢。微球的离子交换性能及含N特性使制备的Pd纳米粒子具有高分散性、小尺寸、均一粒径和优化的电子结构。考察了甲酸浓度和反应温度对产氢速率的影响。结果表明,在50℃、甲酸浓度为1mol/L、甲酸与钯摩尔比为200、甲酸与甲酸钠摩尔比为3的优化反应条件下,甲酸完全分解时间为30min。催化剂使用4次后活性无明显下降。 英文摘要: Catalytic formic acid decomposition to hydrogen is an important route for hydrogen storage and hydrogen energy utilization. Dendritic ionic polymer microspheres were prepared by quaternization and polymerization using 4-vinylpyridine and 1,3,5-tris(bromomethyl)-2,4,6-trimethylbenzene as the precursors. After loading Pd nanoparticles, they were used to catalyze decomposition of formic acid to hydrogen. Pd nanoparticles with high dispersion, small size, uniform particle size distribution and optimized electronic structure were obtained, which is benefited from the ion-exchange and N-rich characteristic of the microspheres. The effects of formic acid concentration and reaction temperature on the hydrogen production rate were investigated. The results indicated that formic acid can be completely decomposed within 30 min under the optimal reaction conditions (50 ℃, 1 mol/L of formic acid, the molar ratios of formic acid to palladium and sodium formate are 200 and 3, respectively). There is no significant decrease in the activity after the catalyst is used for 4 times. 查看全文查看/发表评论下载PDF阅读器 -->
相关话题/江苏 北京 中国科学院 优化 纳米