基本信息
戴兰宏男博导中国科学院力学研究所
电子邮件： lhdai@lnm.imech.ac.cn
通信地址： 北京市北四环西路15号
邮政编码： 100190

研究领域

招生信息
招生专业080102-固体力学

招生方向冲击动力学与新型材料力学性能


教育背景1992-09--1996-08中国科学院大学博士学位
1989-09--1992-08合肥工业大学硕士学位
1981-09--1985-07中国石油大学学士学位

学历
学位

工作经历
工作简历2006-10~现在,中国科学院力学研究所,研究员
2005-10~2006-10,哈佛大学,访问
1998-09~2005-10,中国科学院力学研究所,副研究员
1996-08~1998-08,北京大学,博士后
1992-09~1996-08,中国科学院大学,博士学位
1989-09~1992-08,合肥工业大学,硕士学位
1985-07~1989-08,中国石油大学,讲师
1981-09~1985-07,中国石油大学,学士学位

社会兼职2015-01-01-今,中国力学学会爆炸力学专业委员会, 主任委员
2014-11-01-今,中国力学学会, 副理事长
2014-01-01-今,中国物理学会非晶态物理专业委员会, 委员
2011-01-01-今,中国力学学会固体力学专业委员会, 委员
2009-01-01-今,国际材料动态行为学会（DYMAT）, 会员
2008-07-01-今,中国复合材料学会, 常务理事
2003-01-01-今,中国力学学会青年工作委员会, 副主任委员


教授课程弹塑性力学
科研实践Ⅰ-综合物理实验（非课程）
力学进展系列讲座


专利与奖励
奖励信息（1） 中国科学院优秀研究生指导教师奖, 院级, 2010
（2） 中国科学院“朱李月华”优秀教师奖, 院级, 2009

专利成果

出版信息
发表论文（1）Enhancing strength without compromising ductility in copper by combining extrusion machining and heat treatment,J. Mater. Process. Tech.,2019-01,第11作者
（2）Revisiting the structure-property relationship of metallic glasses: Common spatial correlation revealed as a hidden rule,Phys. Rev. B,2019-01,第11作者
（3）Influence of surface energy and thermal effects on cavitation instabilities in metallic glasses,Mech. Mater.,2019-01,第11作者
（4）One-step annealing optimizes strength-ductility tradeoff in pearlitic steel wires,Mater. Sci. Eng. A,2019-01,第11作者
（5）Ratchetting in cold-drawn pearlitic steel wires,Metal. Mater. Trans. A,2019-01,第11作者
（6）Probing the role of Johari-Goldstein relaxation in the plasticity of metallic glasses,Mater. Res. Lett.,2019-01,第11作者
（7）Hierarchical-microstructure based modeling for plastic deformation of partial recrystallized copper,Mech. Mater.,2019-01,第11作者
（8）Susceptibility of shear banding to chemical short-range order in metallic glasses,Scr. Mater.,2019,第11作者
（9）Extraordinary creep relaxation time in a La-based metallic glass,J. Mater. Sci.,2018,第11作者
（10）Dilatancy induced dutile-brittle transition of shear band in metallic glasses,Proc. R. Soc. A,2018,第11作者
（11）A free energy landscape perspective on the nature of collective diffusion in amorphous solids,Acta Mater.,2018,第11作者
（12）Strong resistance to hydrogen embrittlement of high-entropy alloy,Mater. Sci. Eng. A,2018,第11作者
（13）On the instability of chip flow in high-speed machining,Mechanics of Materials,2017,第11作者
（14）Shear band dilatation in amorphous alloys,Scr. Mater.,2017,第11作者
（15）Cavitation bubble dynamics during pulsed laser ablation of a metallic glass in water,Extreme Mechanics Letters,2017,第11作者
（16）小角X射线散射表征非晶合金纳米尺度结构非均匀,物理学报,2017,第4作者
（17）Elastic-plastic modeling of metallic strands and wire ropes under axial tension and torsion loads,Int. J. Solids Struct.,2017,第11作者
（18）Improved J Estimation by GE/EPRI method for the thin-walled pipes with small constant-depth circumferential surface cracks,J. Pressure Vessel Technol.,2017,第11作者
（19）Atomic theory of viscoelastic response and memory effects in metallic glasses,Phys. Rev. B,2017,第5作者
（20）Strain gradient drives shear banding in metallic glasses,Phys. Rev. B,2017,第11作者
（21）Universal structural softening in metallic glasses indicated by boson heat capacity peak,Appl. Phys. Lett.,2017,第6作者
（22）Enhancing surface integrity by high-speed extrusion machining,Int. J. Adv. Manuf. Technol.,2016,第11作者
（23）Correlation between strain rate sensitivity and a relaxation of metallic glasses,AIP Advances,2016,第11作者
（24）Intrinsic structural defects on medium range in metallic glasses,Intermetallics,2016,第11作者
（25）Shock compression response of high entropy alloys,Mater. Res. Lett.,2016,第11作者
（26）Onset and evolution of discontinuously segmented chip flow in ultra-high-speed cutting Ti-6AL-4V,Int. J. Adv. Manuf. Technol.,2016,第11作者
（27）Understanding the serrated flow and Johari-Goldstein relaxation of metallic glasses,J. Non-Cryst. Solids,2016,第11作者
（28）Determination of dynamic shear strength of 2024 aluminum alloy under shock compression,AIP Advances,2016,第11作者
（29）A metallic glass syntactic foam with enhanced energy absorption performance,Scr. Mater.,2016,第11作者
（30）An index of shear banding susceptibility of metallic glasses,Intermetallics,2016,第11作者
（31）Nature of crack-tip plastic zone in metallic glasses,Inter. J. Plasticity,2016,第11作者
（32）Size-dependent plastic deformation and failure mechanisms of nanotwinned Ni3Al: insights form atomistic cracking model,Mater. Sci. Eng. A,2016,第11作者
（33）Direct atomic-scale evidence for shear–dilatation correlation in metallic glasses,Scr. Mater.,2016,第11作者
（34）Dynamic fragmentation induced by network-like shear bands in a Zr-based bulk metallic glass,Intermetallics,2016,第11作者
（35）Thermal expansion accompanying the glass-liquid transition and crystallization,AIP Advances,2015,第11作者
（36）Universal enthalpy-entropy compensation rule for the deformation of metallic glasses,Phys. Rev. B,2015,第11作者
（37）Understanding ductile-to-brittle transition of metallic glasses from shear transformation zone dilatation,Theor. Appl. Mech. Lett.,2015,第11作者
（38）On the compressive failure of tungsten fiber reinforced Zr-based bulk metallic glass composite,Int. J. Solids. Struct.,2015,第11作者
（39）Modelling the tuned criticality in stick-slip friction during metal cutting,Modelling Simul. Mater. Sci. Eng.,2015,第11作者
（40）Heterogeneous dynamics of metallic glasses,Scr. Mater.,2015,第11作者
（41）Modeling of multi-strand wire ropes subjected to axial tension and torsion loads,Int. J. Solids Struct.,2015,第11作者
（42）Explosive boiling of a metallic glass superheated by nanosecond pulse laser ablation,Appl. Phys. Lett.,2015,第11作者
（43）Dynamic shear punch behavior of tungsten fiber reinforced Zr-based bulk metallic glass matrix composites,International Journal of Impact Engineering,2015,第11作者
（44）Bridging shear transformation zone to the atomic structure of amorphous solids,J. Non-Crystalline Solids,2015,第11作者
（45）Origin of stress overshoot in amorphous solids,Mech. Mater,2015,第11作者
（46）Joining of bulk metallic glass to brass by thick-walled cylinder explosion,Scr. Mater,2015,第11作者
（47）Characterization of the deformation field in large-strain extrusion machining,J. Mater. Proc. Techno.,2015,第11作者
（48）Ductile-to-brittle transition in spallation of metallic glasses,J. Appl. Phys,2014,第11作者
（49）Suppression of repeated adiabatic shear banding by dynamic large strain extrusion machining,J. Mech. Phys. Solids,2014,第11作者
（50）Wavelike fracture pattern in a metallic glass: a Kelvin-Helmholtz flow instability,Phil. Mag. Lett.,2014,第11作者
（51）Direct observation on the evolution of shear banding and buckling in Tungsten fiber reinforced Zr-based bulk metallic glasses composite,Metallurgical and Materials Transactions A,2014,第11作者
（52）Cryogenic-temperature-induced transition from shear to dilatational failure in metallic glasses,Acta Materialia,2014,第11作者
（53）Critical cutting speed for onset of serrated chip flow in high speed machining.,International Journal of Machine Tools & Manufacture,2014,第11作者
（54）Onset and direction of shear banding instability in metallic glasses,J. Mater. Sci. Technol.,2014,第11作者
（55）A universal power law for metallic glasses,Scr. Mater.,2013,第11作者
（56）Collective evolution dynamics of multiple shear bands in bulk metallic glasses,Inter. J. Plasticity,2013,第11作者
（57）Strain rate dependent shear banding behavior of a Zr-based bulk metallic glass composite.,Materials Science & Engineering A,2013,第11作者
（58）Cavitation instability in bulk metallic glasses,Int. J. Solids Struct.,2013,第11作者
（59）Modeling periodic adiabatic shear band evolution during high speed machining Ti-6Al-4V alloy,Int. J. Plasticity,2013,第11作者
（60）Relation between ideal and real strengths of metallic glasses,J. Non-Cryst. Solids,2012,第11作者
（61）Saffman-Taylor fingering in nanosecond pulse laser ablating bulk metallic glass in water,Intermetallics,2012,第11作者
（62）Energy absorption mechanism of open-cell Zr-based bulk metallic glass foam,Scripta Mater,2012,第11作者
（63）非晶合金泡沫材料的研究进展.,材料科学与工程学报,2012,第11作者
（64）Cutting AISI 1045 steel at very high speeds,International Journal of Machine Tools & Manufacture,2012,第11作者
（65）Amorphous alloy reinforced Whipple shield structure,International Journal of Impact Engineering,2012,第11作者
（66）非晶合金塑脆断裂转变的控制参数,中国科学：物理学 力学 天文学,2012,第11作者
（67）Temperature-dependent yield asymmetry between tension and compression in metallic glasses,Acta Phys. Sin.,2012,第11作者

发表著作Shear banding in bulk metallic glasses in adiabatic shear localization:frontiers and advances,Elsevier,2012-01,第1作者


科研活动
科研项目（ 1 ） 金属高速切削机理及相关力学基础理论研究, 主持,国家级,2012-01--2016-12
（ 2 ） 非晶合金剪切带涌现的内禀关联机制, 主持,国家级,2015-01--2018-12
（ 3 ） 钢索高速冲击性能试验装置与测试系统, 主持,部委级,2015-01--2016-12
（ 4 ） XXX冲击波机理研究, 主持,国家级,2015-01--2018-12
（ 5 ） 多场耦合条件下金属结构材料损伤演化行为的跨尺度关联评价, 主持,国家级,2017-07--2021-06
（ 6 ） 无序合金的塑性流动与强韧化机理, 主持,国家级,2018-01--2022-12
（ 7 ） 复杂介质系统前沿与交叉力学, 主持,部委级,2016-01--2021-12

参与会议（1）Shear banding in metallic glasses2016-05-17
（2）Shear banding in high speed machining of metals2016-01-03
（3）冲击载荷下非晶合金层裂损伤萌生与演化动力学中国材料大会2015-07-11
（4）Dissipation dynamics of shear band in metallic glasses2014-08-14
（5）Shear banding and fracture behavior in tungsten fiber/metallic glass composites2014-06-14
（6）Self-organization of shear bands in bulk metallic glasses2014-01-03
（7）Nucleation and growth of voids in bulk metallic glasses2013-09-01
（8）How does metallic glass fracture?2011-12-01
（9）Fracture mechanism of metallic glasses2011-01-11
（10）Fracrure mechanics in BMGs2010-10-10


合作情况
项目协作单位

指导学生