个人信息

---

姓名：顾继俊
性别：男
出生日期：1981年8月17日
籍贯：江苏省扬州市
教育程度：博士
工作单位：中国石油大学（北京）
专业：机械工程
职称：副教授
Email：gu@cup.edu.cn
个人简介

---

顾继俊，男，江苏江都人，1981年8月生，中国石油大学(北京)机械与储运工程学院副教授。2008年7月在石油大学（北京）获机械电子工程专业硕士学位，2008年9月由国家留学基金委公派赴巴西里约热内卢联邦大学攻读博士学位，并于2012年7月获得海洋工程专业博士学位。博士期间得到国家留学基金委和巴西政府高层次人才促进计划（CAPES）全额奖学金的资助。博士毕业后被中国石油大学（北京）聘为副教授，目前研究领域为石油开采与输运装备的设计、分析、检测监测与安全评估等研究工作。先后承担完成10多个石油工程的研究项目，包括国家重大专项3项，国家自然科学基金2项、横向课题7项，发表学术论文40多篇，其中SCI检索15篇、EI检索9篇，获得中国石油和化学工业联合会科技进步奖二等奖。自2010年以来曾多次主持国际学术会议，在国际学术界相当活跃，是该专业领域有一定知名度的。
主要学术兼职

---

1.Federal University of Rio de Janeiro高级访问；
2.中国仪器仪表学会设备结构健康监测与预警分会理事；
3.北京振动协会理事；
4.巴西机械工程协会会员；
5.国外期刊“Ships and Offshore Structures”、“Journal of Hydrodynamics”、“Ocean Engineering”等8家著名期刊审稿专家。
教育及工作经历

---

2013.2～至今 中国石油大学（北京），机械与储运工程学院，副教授
2008.8～2013.1 巴西里约热内卢联邦大学LabOceano深水重点实验室，助理研究员
2008.9～2012.7 巴西里约热内卢联邦大学，海洋工程，博士
2004.09～2008.07 中国石油大学（北京），机械电子工程，硕士
2000.09～2004.07 中国石油大学（北京），自动化，本科
科研项目：

---

1.基于深水功能舱的全智能新一代水下生产系统关键技术研究子课题，2016国家重点研发计划；
2.深水水下生产设施制造、测试装备及技术研究；国家十二五重大专项；
3.水下采油树研发及产业化；发改委十二五重大专项；
4.自升式钻井平台自动排管系统研制；国家海洋局区域示范工程；
5.海管运行影响分析和监测方案研究；工信部十二五重大专项；
6.海洋工程虚拟现实与仿真系统研制；科技部十三五重大专项；
7.基于广义积分变换法的深水立管涡激振动预报模型研究，国家自然基金青年科学基金；
8.深水输流管线在涡激振动响应下的非线性动力学特性研究，引进人才科研启动基金；
9.电驱往复式压缩机配管系统仿真分析与减振技术研究；企业横向课题；
10.深水海底管道水下清管系统研究；企业横向课题；
11.陆岸油气终端检验技术研究；企业横向课题；
12.Spar深水钻井生产储卸油平台技术研究开发；企业横向课题；
13.FPSO深水单点系泊系统极限工况下的应力分析；企业横向课题；
14.海底管线设计与施工国产化技术研究；企业横向课题。
代表性论文：

---

期刊：
1.Jijun Gu*, Tianqi Ma, Menglan Duan. 2016. Effect of aspect ratio on the dynamic response of a fluid-conveying pipe using the Timoshenko beam model. J. Ocean Engineering. 114: 185-191. (SCI,EI)
2.Jijun Gu*, Menglan Duan, 2016. Integral transform solution for fluid force investigation of a flexible circular cylinder subject to vortex-induced vibrations. Journal of Marine Science and Technology. pp:1–16. (SCI,EI)
3.Jijun Gu*, Bing Dai, Yi Wang, Mingjie Li & Menglan Duan. 2016. Dynamic analysis of a fluid-conveying pipe under axial tension and thermal loads. J. Ships and Offshore Structures. pp: 1-14. (SCI,EI)
4.Jijun Gu*, Yi Wang, Yu Zhang, Menglan Duan，Carlos Levi. “Analytical Solution of Mean Top Tension of Long Flexible Riser in Modeling Vortex-Induced Vibrations”. Applied Ocean Research, Vol 41, pp: 1-8, 2013. DOI: 10.1016/j.apor.2013.01.004 (SCI)
5.Jijun Gu*, Marcelo Vitola, Jairo Coelho, Waldir Pinto, Menglan Duan, Carlos Levi. “An experimental investigation by towing tank on VIV of a long flexible cylinder for deepwater riser application”. Journal of Marine Science and Technology, 1-12. 2013. DOI:10.1007/s00773-013-0213-6 (SCI)
6.Jijun Gu, Chen An, Menglan Duanc, Carlos Levi, Jian Su*. “Integral transform solutions of dynamic response of a clamped-clamped pipe conveying fluid”. Nuclear Engineering and Design, Vol 254, pp: 237- 245, 2013. DOI: 10.1016/j.nucengdes.2012.09.018 (SCI)
7.Jijun Gu, Chen An, Carlos Levi, Jian Su*. "VIV prediction of a long ?exible cylinder using a coupled nonlinear oscillator: Integral transform solution". Journal of Hydrodynamics, Ser.B, Vol 24(6), pp: 888–898, 2012. DOI: 10.1016/S1001-6058(11)60317-X (SCI)
8.Jijun Gu, Waldir Pinto, Menglan Duan*, Carlos Levi. "An experimental study of the spanwise correlation of vortex shedding in the flume". Ships and Offshore Structures, pp: 1-7, 2012. DOI:10.1080/**.2012.726706. (SCI)
9.Chen An, Jijun Gu, Jian Su*. “Integral transform solution of bending problem of clamped orthotropic rectangular plates”. Journal of the Brazilian Society of Mechanical Sciences and Engineering. In press. (SCI)
10.Hong Zhao, Jijun Gu, Li Lin. ”Drill and Casing Pipes on-line Inspection System Based on Levenberg- Marquardt Neural Network”. (in Chinese) Equipment Manufacturing Technology. 2009, Vol 2, pp 87-89.
11.Yi Wang*, Ji-jun Gu,Chen An, Meng-lan Duan, and Ning He, “An Analytical Solution by HAM for Nonlinear Simulation of Deepwater SCR Installation”, Journal of Applied Mathematics, Volume 2014 (2014), Article ID 801781, DOI: 10.1155/2014/801781. (SCI)
12.An C, Gu J, Su J. Exact solution of bending problem of clamped orthotropic rectangular thin plates[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2015:1-7. (SCI)
13.Song Z, Duan M, Gu J. Hydrodynamics and vortex shedding characteristics of two tandem cylinders of different diameters in steady flow[J]. Ships & Offshore Structures, 2015:1-14. (SCI)
14.Fu G, Gu J, Lourenco M I, et al. Parameter determination of double-ellipsoidal heat source model and its application in the multi-pass welding process[J]. Ships & Offshore Structures, 2014, 10(2):204-217. (SCI)
15.Wang Y, Gu J, Duan M, et al. A new partition model for the optimization of subsea cluster manifolds based on the new definition of layout cost[J]. Proceedings of the Institution of Mechanical Engineers Part M Journal of Engineering for the Maritime Environment, 2015. (SCI)
16.张敬安, 李成钢, 刘卓, 顾继俊, 肖治国, & 段梦兰. (2013). 水下清管发射技术及其装置. 石油机械, 41(12), 63-66.
17.肖易萍; 苏立国; 张宪阵; 李伟; 宋振华; 段梦兰; 周岩; 顾继俊 . 水下采油树及下放安装技术研究[J]. 石油矿场机械, 2014(8):70-73.
18.苏立国, 顾继俊, 段梦兰,等. 基于CFD的圆柱绕流流场特性分析[J]. 石油矿场机械, 2015, 44(4):5-8.
19.郭中云, 顾继俊, 邱盼,等. 水下采油树工厂验收测试(FAT)技术研究[J]. 石油矿场机械, 2015(6):21-25..
会议:
1.Jijun Gu,Zhenhua Song, Kang Zhang, Liguo Su, Menglan Duan. “Dynamic response of afluid-conveying riser subject to vortex-induced vibration: Integral transformsolution”.In the proceedings of the ASME 2014 33rd International Conference on Ocean,Offshore and Arctic Engineering, OMAE2014, June 7-14, 2014, San Francisco, USA.(EI)
2.Jijun Gu, Yu Zhang, Yi Wang, Menglan Duan, Carlos Levi. “VIV Prediction of a Long Tension-dominated Riser using a Wake Oscillator Model”. International Conference on Underwater Technology Technical Conference (SUTTC 2012), Shenzhen, China, September 26-28, 2012.
3.Jijun Gu, Marcelo Vitola, Carlos Levi, Jairo Coelho, Waldir Pinto, Menglan Duan. “An Experimental Study of Dynamic Response of a Top Tensioned Riser Model Subject to VIV”. International Conference on Underwater Technology Technical Conference (SUTTC 2012), Shenzhen, China, September 26-28, 2012.
4.Jijun Gu, Marcelo Vitola, Waldir T. Pinto, Menglan Duan, Carlos Levi. “Experimental investigation of dynamic response of a flexible cylinder in a transverse flow”. In the proceedings of the ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012, July 1-6, 2012, Rio de Janeiro, Brazil. (EI)
5.Guang-Ming Fu, Ji-Jun Gu, John Alex Hernández Chujutalli, Marcelo Igor Louren?o, Segen F. Estefen. “An Analytical and Numerical Study of Parametric Research of Goldak’s Heat Source Model in MIG Welding Process and Experimental Calibrations”. Submitted to 24? Congresso Nacional de Transporte Aquaviário, Constru??o Naval e Offshore, SOBENA 2012.
6.Chen An, Jijun Gu, Jian Su. "Integral Transform Solution of Bending Problem of Clamped Orthotropic Rectangular Plates". International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M&C 2011) Rio de Janeiro, RJ, Brazil, May 8-12, 2011.
7.Jijun Gu; Menglan Duan; Waldir T. Pinto; Carlos Levi, "Experimental Correlation Length Evaluation for Flexible Marine Riser in Transverse Flow". In: 20th International Society of Offshore and Polar Engineers (ISOPE), 2010, Beijing, China. Proceedings of the Twentieth (2010) International Offshore and Polar Engineering Conference, 2010. Vol 3, pp: 1094-1101. (EI)
8.Xiaoxia Liu, Liguo Su, Jijun Gu, Zhenghua Song, Zhongyun Guo, Pan Qiu, MenglanDuan, “A New Suppression Device of Vortex-Induced Vibration of Marine Riser” , International Conference on Underwater Technology Technical Conference (SUTTC 2014), Qingdao, China, October 13-15, 2014.
9.Yiqian Pang, Menglan Duan, Jijun Gu, Xiaoyu Che, “Periodic Solution of Vortex-induced Vibrationby Homotopy Analysis Method” International Conferenceon Underwater Technology Technical Conference (SUTTC 2013) , Shanghai, China.

授权发明专利：

---

(1) 顾继俊; 苏立国; 宋振华; 段梦兰; 张玉. 一种用于抑制圆柱形结构物涡激振动的装置及方法. 中国，CN.3.
(2) 储乐平、肖易萍、史佑、段梦兰、吴志星、顾继俊、郭兴伟、宋振华、高薇薇. 深水油管悬挂器测试台架. 中国，CN20**.
学术奖励：

---

(1) 顾继俊（2/10），深水立管设计关键技术及应用，2015年度中国石油和化学工业联合会科学技术奖，科学技术奖，省部二等奖，2015.01.01
（段梦兰，顾继俊，王懿，安晨，张玉，官耀华，金国林，金鑫，赵天奉，付光明）