王树彬 职称职务：副教授
所在单位：材料物理与化学系
联系电话：
传真：
电子邮箱：shubinwang@buaa.edu.cn
办公地点：新主楼D座431




基本情况
王树彬，男，1965年出生，蒙古族，黑龙江省杜尔伯特蒙古族自治县人。1999年毕业于哈尔滨工业大学，获得材料学专业工学博士学位；2001年从天津大学材料科学与工程学院完成博士后研究工作出站；2002年起在北京航空航天大学材料科学与工程学院工作。



主讲课程
本科生课程《无机非金属材料基础》



研究方向
1、纤维增强陶瓷基复合材料界面强韧化；2、锂离子电池负极材料


研究成果
1. Self-assembly and performances of wrinkled rGO@carbon fiber with embedded SnO2 nanoparticles as anode materials for structural lithium-ion battery. J Mater Sci (2018) 53:11607–11619
2. Wrinkled rGO Sheets-Wrapped Carbon Fibers with High Tensile Strength and Excellent Electrochemical Stability as Anodes for Structural Li-Ion Battery. NANO: Brief Reports and Reviews.Vol. 13, No. 8 (2018) **
3. MOF-derived ZnCo2O4/C wrapped on carbon fiber as anode materials for structural lithium-ion batteries. Chinese Chemical Letters xxx (2018) xxx–xxx
4．Carboxyl Functionalized Carbon Fibers with Preserved TensileStrength and Electrochemical Performance used as Anodes of Structural Lithium-IonBatteries。Applied Surface Science, 2017.1.10, 392: 27~35
5. Foldcore sandwich structure formed by BN-coated graphene nanosheets grafted to SiC fibers with enhanced mechanical performance。MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017.11.28, 707: 531~537
6. Multifunctional structural lithium ion batteries based on carbon fiber reinforced plastic composite. COMPOSITES SCIENCE AND TECHNOLOGY, 2017.7.28, 147(JUL): 62~70
7. The ionic conductivity, mechanical performance and phase structural electrolytes based on polyethylene and nano-silica. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2017.5, 219: 37~44
8. A modified dip-coating method toprepare BN coating on SiC fiber byintroducing the sol–gel process.Surface & Coatings Technology, 2016, (286): 57~63
9. Co-continuous structural electrolytes based on ionic liquid, epoxy resinand organoclay: Effects of organoclay content. Materials and Design, 2016.5.6, 104: 126~133
10. Core–shell rGO/SnO2@CF with wrinkled surface used as structural anode material: high tensile strength and electrochemical stability.Journal of Materials Chemistry A, 2016.11.30, (4): 18524~18531
11. H3PO4/H2SO4/HNO3 Chemical Functionalization Optimized Performances of Functionalized Carbon Fibers via Preventing Fibers from Over-Oxidation.Journal of the Electrochemical Society,, 2016.10.31, 163(10): A2225~A2231
12. Effects of B2O3content and sintering temperature oncrystallizationand microstructure of CBS glass–ceramic coatings. Applied Surface Science, 356卷,1180-1188, 2015
13. Synthesis of Single-Phase b-Yb2Si2O7 and Properties of Its Sintered Bulk. Int. J. Appl. Ceram. Technol. , 12(6), 1140-1147, 2015
14. Effect of different thickness h-BN coatings oninterface shear strengthof quartz fiber reinforced Si O C N composite. Applied Surface Science, 2014, 292: 876~879
15. The effect of the microstructure of porousalumina films on the mechanicalproperties of glass-fiber-reinforcedaluminum laminates. Composite Interfaces, 21(5), 381-393, 2014.
16. Thermal shock behavior of ZrB2–SiCcomposite ceramics withadd. Int. Journal of Refractory Metals and Hard Materials, 41卷, 507-516,2013
17. Influence of the microstructureevolution of ZrO2 fiber on the fracture toughness of ZrB2-SiCnanocomposite ceramics. Materials and Design, 2013.1.1, 49: 808~813
18. Effect of moderately high temperature heat treatment on surfacemorphology and structure of quartz fibers. Applied Surface Science, 2012, 258: 4698~4701
19. Al2O3 nanoparticle reinforced Fe-based alloyssynthesized by thermite reaction. J Mater Sci. , 47卷, 3585-3591, 2012.
20. Orientation degreecharacterization of diamond etched with Ce-7%Fe alloy OriginalResearch. Journal of Rare Earths, 30(2), 170-174, 2012.
21. Fabrication andcharacterization of aluminum silicate fiber–reinforced hollow mesoporous silicamicrospheres composites. Microporous and Mesoporous Materials, 152卷, 104-109, 2012.
22. The effect of SiO2-dopedboron nitride multiple coatings on mechanical properties of quartz fibers. Applied Surface Science, 2012, 258: 2901~2905
23. nvestigationof Hollow Silica Spheres with Controllable Size and Shell Thickness. Journal of Inorganic Materials, 26(8), 885-891, 2011.
24. Synthesis of boron nitride coatings on quartz fibers: thickness controland mechanism research. Applied Surface Science, 2011, 257: 10752~10757
25. Influence ofnanosized SiC particle on the fracture toughness of ZrB2-basednanocomposite ceramic. Materials Science and Engineering A, 527卷,2925-2928, 2010
26. Surface graphitization analysis of cerium-polishedHFCVD diamond films with micro-raman spectra. Journal of Rare Earths, 26(3), 362-366, 2008
27. Growth and Characterization of theMagnesia Thin Filmby Atmospheric-pressure MOCVD. Journal of Synthetic Crystals, 36(5), 1173-1177, 2007.
28．Preferred Orientation Growthof Ba0.6Sr0.4TiO3 Thin Films with EpitaxialMgO Buffer Layer on Si(100) Substrate...Key Engineering Materials, 336(338), 69-72, 2007.
29. Polishingof diamond thick films by Ce at lower temperatures.Diamond & Related Materials, 15卷, 1412-1417, 2006.
30. Prepartion of 1-3 connectivity composite films of well-aligned ZnOwhisker arrays with an organic resin. International Journal of Modern Physics B, 25(25-27), 3658-3662, 2006
31. Preparation of bariumstrontium titanate thin films by sol-gel technique.
Rare Metal Materials and Engineering, 34(2), 907-909, 2005
32. 叔丁醇基凝胶注模成型制备ZTA多孔陶瓷. 人工晶体学报，44(1)，24-30， 2015. ;
33. Y2 O3 添加对Yb2 Si2 O7 无压烧结致密化的影响.人工晶体学报, 2014. 43(3): 513~517
34. 阳极氧化工艺对纤维铝合金层板力学性能的影响.复合材料学报，30(3)，154-159， 2013.
35. CBS涂层对多孔氮化硅高温高频介电性能的影响.材料工程，2期，42-45， 2011
36. 多孔氮化硅表面封孔增强涂层研究.无机材料学报，23(4)，769-773，2008
37. 石英纤维表面低温制备氮化硼涂层. 人工晶体学报，37(2)，475-479，2008. ;
38. BNBT无铅压电陶瓷晶粒定向生长.人工晶体学报，36(4)，885-888，2007.
39. Ce-Mn 合金低温抛光 CVD 金刚石厚膜.稀有金属材料与工程， 36(增刊２)， 892-895，2007.
40. 部分熔融 Ce-Fe 合金低温快速抛光 CVD 金刚石膜.稀有金属材料与工程， 36(5)，933-936，2007
41. 熔融铈快速抛光CVD金刚石厚膜及表面分析. 功能材料，2期，326-329， 2007
42. 碳化钛悬浮体分散特性和流变性能的研究. 稀有金属材料与工程，36(增刊２)，153-155，2007
43. 石英纤维表面氮化硼涂层的制备及表征. 稀有金属材料与工程，36(增刊2)，715-717，2007
44. 石英纤维析晶行为. 复合材料学报，23(6)，75-79， 2006.
45. MOCVD法制备一维定向ZnO晶须阵列及掺杂研究.人工晶体学报，34(6)，972-976，2005
46. 溶胶一凝胶法制备钛酸锶钡薄膜. 稀有金属材料与工程，34(增刊l)，904-907，2005
47. 铁电陶瓷颗粒填充压电复合材料的微结构与性能. 中国塑料，15(12)，30-32， 2001
48. PZT/PVDF压电复合材料的制备及其性能研究. 复合材料学报， 17(4)，1-5， 2000.
49. 压电复合材料的制备及性能. 材料研究学报， 14(增刊)，150-153，2000.
50. PZT/PVDF压电复合材料的合金化制备技术及其性能研究. 宇航材料工艺， 6期，42-45，1999.
51. 模压工艺制备PZT/ PVDF压电复合材料及性能研究. 压电与声光，21(4)， 314-317，1999

52. 压电陶瓷/聚合物复合材料的制备工艺及其性能研究进展. 功能材料，30(2)， 113-117，1999