删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

钨合金弹体超高速撞击混凝土靶成坑特性研究

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
钨合金弹体超高速撞击混凝土靶成坑特性研究
Study of the Crater Produced by Hypervelocity Tungsten Alloy Projectile into Concrete Target
投稿时间:2017-07-11
DOI:10.15918/j.tbit1001-0645.2018.10.004
中文关键词:超高速撞击成坑特性量纲归一化分析二级轻气炮混凝土靶CT图像诊断
English Keywords:hypervelocity impactcrateringdimensionless analysistwo-stage light gas gunconcrete targetcomputerized tomography(CT)
基金项目:
作者单位
钱秉文清华大学工程物理系, 北京 100084
西北核技术研究所, 陕西, 西安 710024
周刚西北核技术研究所, 陕西, 西安 710024
李进西北核技术研究所, 陕西, 西安 710024
张德志西北核技术研究所, 陕西, 西安 710024
张向荣西北核技术研究所, 陕西, 西安 710024
朱玉荣西北核技术研究所, 陕西, 西安 710024
景吉勇西北核技术研究所, 陕西, 西安 710024
谭书舜西北核技术研究所, 陕西, 西安 710024
李运良西北核技术研究所, 陕西, 西安 710024
摘要点击次数:990
全文下载次数:550
中文摘要:
为探究钨合金弹体超高速撞击混凝土靶的成坑直径和成坑体积随动能变化的规律,采用二级轻气炮开展了钨合金弹体以1。97~3。66km/s的速度撞击混凝土靶实验,利用CT图像诊断方法得到了实验后的成坑特性实验数据,并基于点源假设进行了超高速撞击条件下成坑特性的量纲归—化分析。结果表明:超高速撞击条件下靶板成坑为“弹坑+弹洞”型;成坑直径和成坑体积随动能增加而单调递增,通过量纲分析得到成坑直径3次方和成坑体积都与弹体动能近似成正比,拟合指数μ接近动能主导的指数2/3,说明成坑过程主要受动能影响。
English Summary:
In order to explore the cratering mechanism of concrete targets undergoing hypervelocity impact, experiments were carried out by two-stage light gas gun with Gram-grade cylindrical tungsten alloy projectiles, impacting concrete targets at velocities from 1.97 to 3.66 km/s. Experimental data of crater were obtained by computerized tomography (CT). Dimensionless analyses based on point source solution were used to further analyze the mechanism of hypervelocity impact. The results showed that: the craters were structured by spalling areas and bullet holes; the body penetration stage occupied a large proportion of the total penetration depth, so that the penetration depth was not positively related to the kinetic energy. The dimension of the cubic crater diameter and the crater volume are proportional to the kinetic energy of the projectiles, which indicates that the cratering process is mainly affected by the kinetic energy.
查看全文查看/发表评论下载PDF阅读器
相关话题/西北核技术研究所 陕西 混凝土 实验 北京